Post Reply 
FlashPAP - FlashAir WiFi SD card utility
Author Message
krelvin Offline

Advisory Members

Posts: 155
Joined: Jul 2014

Machine: Resmed S9 VPAP Auto BiLevel
Mask Type: Full face mask
Mask Make & Model: Quattro Air
Humidifier: S9 Series H5i Heated Humidifier with Climate Control
CPAP Pressure: 10.6cm - 18cm - PS 4cm
CPAP Software: ResScan SleepyHead

Other Comments: FlashAir WiFi SDcard with SleepMaster/FlashPAP - Weather Nut

Sex: Male
Location: Mesa AZ

Post: #91
RE: FlashPAP - FlashAir WiFi SD card utility
(05-17-2015 03:37 PM)Lazer1234 Wrote:  The problem is that the S9 format flashair card as soon as I put it in the CPAP. I managed to make contact and reading the data one time when I stopped in the card. But then I breathed 5 minutes in the machine and when I then would transfer data using FlashPap, the card was formatted.
Are you by chance cutting the power to your S9?

The only time I've had anything like that was when the power was cut off due to a power failure.

Current Settings PS 4.0 over 10.6-18.0 (cmH2O) BiLevel Auto
TNET Sleep Resource Pages
CPAP Machine Database
05-17-2015 03:42 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Lazer1234 Offline

Preferred Members

Posts: 77
Joined: Aug 2013

Machine: ResMed S9 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: TapPap
Humidifier: Yes
CPAP Pressure: 8,6 - 20 EPR 3
CPAP Software: ResScan SleepyHead

Other Comments: Win7-64 SP1 SleepyHead v1.0.0-beta-1 ResScan 5,3

Sex: Male
Location: Sweden

Post: #92
RE: FlashPAP - FlashAir WiFi SD card utility
No, never cut the power. S9 always format the card if there are more files than normal on it.
05-17-2015 05:18 PM
Find all posts by this user Post Reply Quote this message in a reply
TiredToo Offline

Preferred Members

Posts: 83
Joined: Mar 2015

Machine: ResMed AirSense 10 AutoSet
Mask Type: Full face mask
Mask Make & Model: Airfit F10 (also have a Simplus, Eson and P10)
Humidifier: Built-in
CPAP Pressure: 14-20
CPAP Software: SleepyHead Other Software

Other Comments: Started CPAP Feb 9th, 2015. Suffered for way too many years prior.

Sex: Male
Location: NW Indiana, USA

Post: #93
RE: FlashPAP - FlashAir WiFi SD card utility
(05-17-2015 02:42 PM)eseedhouse Wrote:  Thanks - that was the hint I needed, and I can now reach it over the regular LAN network rather than just with wireless. I reserved an IP for it's MAC address so hopefully it won't change.

Flashpap import now works fine using the IP address of the card.

Glad to hear it is working in station mode now! With the reserved IP address you should be good to go.
05-17-2015 05:23 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
TiredToo Offline

Preferred Members

Posts: 83
Joined: Mar 2015

Machine: ResMed AirSense 10 AutoSet
Mask Type: Full face mask
Mask Make & Model: Airfit F10 (also have a Simplus, Eson and P10)
Humidifier: Built-in
CPAP Pressure: 14-20
CPAP Software: SleepyHead Other Software

Other Comments: Started CPAP Feb 9th, 2015. Suffered for way too many years prior.

Sex: Male
Location: NW Indiana, USA

Post: #94
RE: FlashPAP - FlashAir WiFi SD card utility
(05-17-2015 05:18 PM)Lazer1234 Wrote:  No, never cut the power. S9 always format the card if there are more files than normal on it.

I'm guessing when you first insert the card it asks to format it? I wonder if your problem is actually caused by Windows writing hidden files to the card. I know this has caused problems for others. You may be able to delete the files manually (by having Windows show hidden files on the card and looking for them). There is also supposed to be a registry fix to prevent Windows from writing to the card.

If you do in fact use Windows, what version? If you are not using Windows then perhaps that isn't the issue.
05-17-2015 05:27 PM
Find all posts by this user Post Reply Quote this message in a reply
AlanE Offline

Advisory Members

Posts: 1,491
Joined: Mar 2015

Machine: ResMed AirSense 10 Autoset
Mask Type: Nasal pillows
Mask Make & Model: P10 & Mirage Liberty backup
Humidifier: Built-in
CPAP Pressure: 10-14
CPAP Software: ResScan SleepyHead

Other Comments: ʕ•ᴥ•ʔ So Long, and Thanks for All the Fish

Sex: Male
Location: Southwest Florida

Post: #95
RE: FlashPAP - FlashAir WiFi SD card utility
I've been using this app and I like it quite a bit. I started trying out the command line options. I have noticed something minor. When I set exit=yes and run it, it does what it needs to do and javaw exits fine. If I have exit=yes with startapp=yes it will start SH and the FP GUI exits but javaw still remains on the process list. Javaw closes when I exit SH. I'm not bothered by this but thought I would mention it.



Using FlashAir W-03 SD card in machine. Access through wifi with FlashPAP or Sleep Master utilities.

I wanted to learn Binary so I enrolled in Binary 101. I seemed to have missed the first four courses. Big Grinnie
05-23-2015 08:21 AM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
TiredToo Offline

Preferred Members

Posts: 83
Joined: Mar 2015

Machine: ResMed AirSense 10 AutoSet
Mask Type: Full face mask
Mask Make & Model: Airfit F10 (also have a Simplus, Eson and P10)
Humidifier: Built-in
CPAP Pressure: 14-20
CPAP Software: SleepyHead Other Software

Other Comments: Started CPAP Feb 9th, 2015. Suffered for way too many years prior.

Sex: Male
Location: NW Indiana, USA

Post: #96
RE: FlashPAP - FlashAir WiFi SD card utility
(05-23-2015 08:21 AM)AlanE Wrote:  I've been using this app and I like it quite a bit. I started trying out the command line options. I have noticed something minor. When I set exit=yes and run it, it does what it needs to do and javaw exits fine. If I have exit=yes with startapp=yes it will start SH and the FP GUI exits but javaw still remains on the process list. Javaw closes when I exit SH. I'm not bothered by this but thought I would mention it.

When the app (java) starts a process for SH it holds a reference to that process until it is completed, so as a result it hangs around until SH is closed. I don't believe there is any way to avoid it. Initially I experimented with forcing this reference to null when exiting the FlashPAP app but this causes the process (SleepyHead) to end - i.e. it closes SleepyHead abruptly.
(This post was last modified: 05-23-2015 09:24 AM by TiredToo.)
05-23-2015 09:21 AM
Find all posts by this user Post Reply Quote this message in a reply
TiredToo Offline

Preferred Members

Posts: 83
Joined: Mar 2015

Machine: ResMed AirSense 10 AutoSet
Mask Type: Full face mask
Mask Make & Model: Airfit F10 (also have a Simplus, Eson and P10)
Humidifier: Built-in
CPAP Pressure: 14-20
CPAP Software: SleepyHead Other Software

Other Comments: Started CPAP Feb 9th, 2015. Suffered for way too many years prior.

Sex: Male
Location: NW Indiana, USA

Post: #97
RE: FlashPAP - FlashAir WiFi SD card utility
An update has been posted to my website. Link in original post.

Quote:v1.2.0
* Resolved issue where the app could stop responding when trying to copy numerous dates at once.

* Depending on the last date copied over, the latest two dates may now be pre-selected in order to prevent missing a newly added session to an already synced date.

* A network scanner has been added to help find the IP address of your FlashAir. Using the host name ("APPNAME") is recommended but if that doesn't work then you can also use the IP address. To access the scanner, click on the [...] button next to the Host Name/IP field.

* Other minor changes


Thanks for your help Kevin!
05-23-2015 05:03 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
AlanE Offline

Advisory Members

Posts: 1,491
Joined: Mar 2015

Machine: ResMed AirSense 10 Autoset
Mask Type: Nasal pillows
Mask Make & Model: P10 & Mirage Liberty backup
Humidifier: Built-in
CPAP Pressure: 10-14
CPAP Software: ResScan SleepyHead

Other Comments: ʕ•ᴥ•ʔ So Long, and Thanks for All the Fish

Sex: Male
Location: Southwest Florida

Post: #98
RE: FlashPAP - FlashAir WiFi SD card utility
Thanks for making this program available to us.



Using FlashAir W-03 SD card in machine. Access through wifi with FlashPAP or Sleep Master utilities.

I wanted to learn Binary so I enrolled in Binary 101. I seemed to have missed the first four courses. Big Grinnie
05-24-2015 10:05 AM
Find all posts by this user Post Reply Quote this message in a reply
Lazer1234 Offline

Preferred Members

Posts: 77
Joined: Aug 2013

Machine: ResMed S9 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: TapPap
Humidifier: Yes
CPAP Pressure: 8,6 - 20 EPR 3
CPAP Software: ResScan SleepyHead

Other Comments: Win7-64 SP1 SleepyHead v1.0.0-beta-1 ResScan 5,3

Sex: Male
Location: Sweden

Post: #99
RE: FlashPAP - FlashAir WiFi SD card utility
Now I have come so far so I can make contact with the card in chrome. FlashPap can see the card and even sleep data for the last night. But when FlashPap should download the data, nothing happens. It stands at 0% all the time.
FlashAir is in station mode.
What's wrong?

[Image: Problem_zpsumnb3vdx.png]
05-25-2015 12:24 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
TiredToo Offline

Preferred Members

Posts: 83
Joined: Mar 2015

Machine: ResMed AirSense 10 AutoSet
Mask Type: Full face mask
Mask Make & Model: Airfit F10 (also have a Simplus, Eson and P10)
Humidifier: Built-in
CPAP Pressure: 14-20
CPAP Software: SleepyHead Other Software

Other Comments: Started CPAP Feb 9th, 2015. Suffered for way too many years prior.

Sex: Male
Location: NW Indiana, USA

Post: #100
RE: FlashPAP - FlashAir WiFi SD card utility
(05-25-2015 12:24 PM)Lazer1234 Wrote:  Now I have come so far so I can make contact with the card in chrome. FlashPap can see the card and even sleep data for the last night. But when FlashPap should download the data, nothing happens. It stands at 0% all the time.
FlashAir is in station mode.
What's wrong?

I'd have to look over my code but what I am thinking is that it's possibly a bug when there is only one date found on the card. I'll have to look it over when I get a chance. I'm wondering: The only date found is today, the 25th. Is there actually any data there yet for the 25th? My thought is that either there isn't or it is a problem with only one single date (and perhaps the progress meter just never finishes).

Is it actually copying anything to the destination folder on your computer? Aside from treatment logs, it should also download a few setting files from the machine.
(This post was last modified: 05-25-2015 09:41 PM by TiredToo.)
05-25-2015 09:41 PM
Find all posts by this user Post Reply Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  SleepyHead / Flashair problem seawolf 6 294 11-21-2016 03:34 PM
Last Post: AlanE
  Using FlashAir with a Macbook Mamabird 7 316 11-03-2016 06:36 PM
Last Post: Mamabird
Idea WiFi SD Card Data-transfer to ResScan & SH for The Rest of Us Papit 57 9,874 10-30-2016 10:59 AM
Last Post: sonicboom
  FlashPap and Rescan 5.6.0 am I missing something? Steve4cr 4 279 10-19-2016 11:19 AM
Last Post: Steve4cr
  FlashPAP - connection time out. Tassie tone 4 259 09-23-2016 09:14 PM
Last Post: sonicboom
  FlashPAP / Flashair - Connection Refused? IMSleeplessInSeattle 1 218 09-23-2016 07:20 PM
Last Post: AlanE
  FlashAir & SleepMaster: won't reconnect after power down or removal chill 5 360 09-11-2016 01:51 AM
Last Post: Jack_Russell_Fan

Forum Jump:

Who's Online (Complete List)