Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Flashair - new CONFIG options
#1
Flashair Dev site has posted some new CONFIG options. Some of these were available since FW 1+ and should work with W-02 and above.

[WLANSD]

ID=SMITH’S_CARD
DHCP_Enabled=YES
IP_Address=
Subnet_Mask=
Default_Gateway=
Preferred_DNS_Server=
Alternate_DNS_Server=
Proxy_Server_Enabled=YES
Proxy_Server_Name=yourproxy.com
Port_Number=8080


Enable DHCP Client (DHCP_Enabled)
Set whether to enable or disable DHCP client as follows.
YES (Default) Enable DHCP client
NO Disable DHC client

IP Address (IP_Address)
When DHCP client is disabled, set the IP Address. Default value is "0.0.0.0".
When "DHCP_Enabled=YES", values are ignored.

Subnet Mask (Subnet_Mask)
When DHCP client is disabled, set Subnet Mask. Default value is "0.0.0.0".
When "DHCP_Enabled=YES", values are ignored.

Default Gateway (Default_Gateway)
When DHCP client is disabled, set the Default Gateway. Default value is "0.0.0.0".
When "DHCP_Enabled=YES", values are ignored.

Preferred DNS Server (Preferred_DNS_Server)
When DHCP client is disabled, set the Preferred DNS Server. Default value is "0.0.0.0".
When "DHCP_Enabled=YES", values are ignored.

Alternate DNS Server (Alternate_DNS_Server)
When DHCP client is disabled, set the Alternate DNS Server. Default value is "0.0.0.0".
When "DHCP_Enabled=YES", values are ignored.

Enable Proxy Server (Proxy_Server_Enabled)
Set whether to enable or disable Proxy Server as follows.
YES Enable Proxy Server
NO (Default) Disable Proxy Server

Proxy Server (Proxy_Server_Name)
Set the domain name or IP Address of Proxy Server. Default is empty.
When "Proxy_Server_Enabled=NO", values are ignored.
Example:
Proxy_Server_Name=yourproxy.com
Proxy_Server_Name=123.123.0.1

Proxy Server Port Number (Port_Number)
Set the Port Number of Proxy Server. Default value is "8080".
When "Proxy_Server_Enabled=NO", values are ignored.

Now we can set a static IP address, subnet mask and gateway. Handy for those that have issues with DHCP assigning an IP to your card.



Using FlashAir W-03 SD card in machine. Access through wifi with FlashPAP or Sleep Master utilities.

I wanted to learn Binary so I enrolled in Binary 101. I seemed to have missed the first four courses. Big Grinnie

Post Reply Post Reply
#2
Thanks for this helpful info, AlanE
Coffee

Happy Pappin'
Never Give In, Never Give Up


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. 
Post Reply Post Reply
#3
Did you get the flash air to work on ResMed AirSense 10 Autoset
2004-Bon Jovi
it'll take more than a doctor to prescribe a remedy

Observations and recommendations communicated here are the perceptions of the writer and should not be misconstrued as medical advice.
Post Reply Post Reply


#4
(05-07-2016, 10:43 AM)0rangebear Wrote: Did you get the flash air to work on ResMed AirSense 10 Autoset

Yes using Flash pap
Coffee

Happy Pappin'
Never Give In, Never Give Up


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. 
Post Reply Post Reply
#5
Thanks AlanE

Sleep-well

Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Problem with FlashPAP and FlashAir RobertWA 17 387 09-06-2017, 04:19 PM
Last Post: Crimson Nape
  FlashPAP - FlashAir WiFi SD card utility TiredToo 222 40,262 08-31-2017, 10:53 AM
Last Post: mogulman
  flashair file structure? Jeffmc 9 501 08-15-2017, 07:20 AM
Last Post: CB91710
Gross Flashair connectivity - help! maep2017 10 486 08-06-2017, 01:41 PM
Last Post: AlanE
  Toshiba FlashAir 2 with Flashpap configuration Marillion 111 4,854 06-25-2017, 12:00 PM
Last Post: st8800
  FlashAir vs. Philips Respironics card Corvette817 3 369 05-20-2017, 05:08 PM
Last Post: Corvette817
Brick LUA Scripting on FlashAir 3 AlanE 4 397 05-12-2017, 02:14 PM
Last Post: TBMx

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.