(02-21-2020, 10:42 AM)Crimson Nape Wrote: I think I would turn off all reminders and alerts, to make sure they are not interfering.
Did that...
Good night Chesty, wherever you are..Semper Fi
Hello Guest,
Welcome to Apnea Board !
Full Reset of Aircurve 10 to Factory Defalts
|
02-21-2020, 02:45 PM
RE: Full Reset of Aircurve 10 to Factory Defalts
(02-21-2020, 10:42 AM)Crimson Nape Wrote: I think I would turn off all reminders and alerts, to make sure they are not interfering. Did that...
My worst night on CPAP is 10X better than my best night without it
Good night Chesty, wherever you are..Semper Fi
02-21-2020, 02:46 PM
RE: Full Reset of Aircurve 10 to Factory Defalts
Do you have any access to another ClimateLine hose or having yours tested on another AC10?
Crimson Nape
Apnea Board Moderator www.ApneaBoard.com ___________________________________ Useful Links -or- When All Else Fails: The Guide to Understanding OSCAR OSCAR Chart Organization Attaching Images and Files on Apnea Board Apnea Helpful Tips INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
02-21-2020, 02:47 PM
RE: Full Reset of Aircurve 10 to Factory Defalts
(02-21-2020, 10:20 AM)jaswilliams Wrote: Smart start will be grayed out if you have leak alarms enabled it’s either one or the other That was it...For the Smart Start making it now available.
My worst night on CPAP is 10X better than my best night without it
Good night Chesty, wherever you are..Semper Fi
02-21-2020, 02:49 PM
RE: Full Reset of Aircurve 10 to Factory Defalts
(02-21-2020, 09:49 AM)Jeff8356 Wrote: Have you tried unplugging the unit from the wall outlet for about 15 minutes? Simple enough to try before doing a factory reset. Tried that...You are right...sometimes it's the simplest things..Didn't work this time, but it may have...
My worst night on CPAP is 10X better than my best night without it
Good night Chesty, wherever you are..Semper Fi
02-21-2020, 03:00 PM
(This post was last modified: 02-21-2020, 03:17 PM by 3rdMarDiv.
Edit Reason: additions
)
RE: Full Reset of Aircurve 10 to Factory Defalts
(02-21-2020, 09:53 AM)bonjour Wrote: If this is a used machine, yes do the factory reset simply because you do not know what the previous owner set and we have seen some things, especially in the more obscure settings that were unexpected. Know the settings you want and make sure you know how to get into the clinician's menu, if you don't already have it see the CPAP Setup link in the banner and follow the directions, you will be manually emailed the requested manual shortly. Bonjour: It is a used machine with only 3900 hours. I did the factory reset and entered the data. Removing the leak alert did make available the Smart Start, but the Climate Controls are not available. Had received the clinicians manual, thanks. Turned "ON" Airplane Mode. After all I've done thus-far the climate control options should have materialized. I get no hose attach confirmation pop-up when connecting the hose. I don't think it's being recognized. Otherwise it is preforming just fine and I will be using it. Again,
My worst night on CPAP is 10X better than my best night without it
Good night Chesty, wherever you are..Semper Fi
02-21-2020, 03:05 PM
RE: Full Reset of Aircurve 10 to Factory Defalts
(02-21-2020, 09:40 AM)OpalRose Wrote: I just purchased a VAuto, and I don't see anything grayed out. Yep, have the clinicians manual and it turned out that having the leak alarm set was causing the Smart Start to be greyed out...Thanks Again
My worst night on CPAP is 10X better than my best night without it
Good night Chesty, wherever you are..Semper Fi
02-21-2020, 03:06 PM
RE: Full Reset of Aircurve 10 to Factory Defalts
(02-21-2020, 11:25 AM)SarcasticDave94 Wrote: ResMed alarm clock...no. I vote cancel all alarms. The last time I hit Snooze on my ASV, a reminder to hold my breath appeared. Yep, it sure did..
My worst night on CPAP is 10X better than my best night without it
Good night Chesty, wherever you are..Semper Fi
02-21-2020, 03:09 PM
RE: Full Reset of Aircurve 10 to Factory Defalts
(02-21-2020, 02:46 PM)Crimson Nape Wrote: Do you have any access to another ClimateLine hose or having yours tested on another AC10? Yes, I had one with the machine and I ordered a new one. Same results with both. ResMed ClimateLineAir new in the bag...Thanks
My worst night on CPAP is 10X better than my best night without it
Good night Chesty, wherever you are..Semper Fi
02-21-2020, 04:39 PM
RE: Full Reset of Aircurve 10 to Factory Defalts
OK glad you solved it. Happy Friday.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
02-21-2020, 04:48 PM
RE: Full Reset of Aircurve 10 to Factory Defalts
(02-21-2020, 10:28 AM)mjphyi Wrote: And 3rdMarDiv's STR data shows that LeakAlert is set; mine does not have that set, and I use SmartStart. Thanks for looking in on that and mentioning here in this thread...Big help..!
My worst night on CPAP is 10X better than my best night without it
Good night Chesty, wherever you are..Semper Fi |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Rant and AirCurve 10 vs AirCurve 11 question | Whacked | 11 | 312 |
03-25-2024, 03:14 PM Last Post: Sleepster |
|
[Treatment] Johnny O's ResMed AirCurve 10 VAuto for severe sleep apnea (61 AHI) and OSA, CSA | JohnnyO | 23 | 573 |
03-21-2024, 05:02 PM Last Post: JohnnyO |
|
Plmnb's New Therapy ResMed AirCurve 10 ST-A | Plmnb | 204 | 8,516 |
03-19-2024, 06:31 AM Last Post: Plmnb |
|
Trouble adapting to ResMed AirCurve 10 ASV | JanetW | 6 | 210 |
03-19-2024, 01:58 AM Last Post: stevew168 |
|
Aircurve 10 ST-A and Lumis 150 VPAP ST-A just a UK branding difference? | SingleH | 37 | 2,243 |
03-18-2024, 07:51 AM Last Post: SingleH |
|
Oscar not recording CSR and RE with Aircurve 10 Vauto | rmfisher132 | 1 | 89 |
03-17-2024, 04:33 PM Last Post: Crimson Nape |
|
Full Face Mask Recommendations for Minimal Bounce with Pressure Support | Unkikonki | 15 | 527 |
03-14-2024, 03:00 PM Last Post: RLRoth |