Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Getting changes to stick with System One xPAP
#1
I am trying to make changes to my System One. I can get to the Clinician's menu and make changes. When I exit the provider's menu, the changes I made aren't there. The system info says the card is unlocked and has 99% free space. When I enter the provider's menu, if the S/D card is in the machine, the screen says "SD card error; remove and reinsert". If I do nothing, the machine continues to beep and display the error message. If I remove and reinsert as directed, the message shows up again as many times as I put the card back in. If I push either the ramp button or the control wheel, the message goes away, but the changes don't "stick" when exiting. What am I missing? Machine was purchased 10/11 and the Dr has made changes to the card, but I can't seem to.Thinking-about
Post Reply Post Reply
#2
Try making the changes with the card removed. Your doctor has probably placed files on the card that direct the machine to make specific pressure settings.

You can also try re-booting machine with the card in, and/or the card out.
Sleepster
Apnea Board Moderator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
Hi mummerse
I don,t use PR System One but as Sleepster said doctor has made some some changes to the card.
I think you can use the machine without the card or get a new card.
Post Reply Post Reply


#4
The changes are there as long as I don't reseat the SD card. Guess I will have to look into getting a new card. What happens to my nightly data if the card isn't available?
Post Reply Post Reply
#5
(03-13-2012, 08:50 PM)mummerse Wrote: The changes are there as long as I don't reseat the SD card. Guess I will have to look into getting a new card. What happens to my nightly data if the card isn't available?
The machine capture the data and you can still view on the LCD screen.
I guess when a new card is used the machine write the data on it.

Post Reply Post Reply
#6
(03-13-2012, 08:50 PM)mummerse Wrote: The changes are there as long as I don't reseat the SD card. Guess I will have to look into getting a new card. What happens to my nightly data if the card isn't available?
Zonk is right. When you next insert the card the data is transferred from the machine's memory to the SD card.

Also, you may be able to find the folder on the SD card that contains the pressure settings.

Sleepster
Apnea Board Moderator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply


#7
Reformat your SD card using your PC, or get a new one.
Post Reply Post Reply
#8
I would get a new 2GB card and see if that dosen't do the trick.
Yesterday is history; Tomorrow is a mystery; Today is a gift; Thats why its called "The Present".
Post Reply Post Reply
#9
(03-14-2012, 09:34 AM)JudgeMental Wrote: I would get a new 2GB card and see if that dosen't do the trick.

I ordered a new card last night. It is being shipped now. I am reluctant to delete anything from the current card till I have a back-up.
Post Reply Post Reply


#10
(03-14-2012, 10:32 AM)mummerse Wrote:
(03-14-2012, 09:34 AM)JudgeMental Wrote: I would get a new 2GB card and see if that dosen't do the trick.

I ordered a new card last night. It is being shipped now. I am reluctant to delete anything from the current card till I have a back-up.

mummerse,

Make sure you read this thread before ordering an SD card, some of the newer types may not work properly in your machine:

http://www.apneaboard.com/forums/Thread-...emory-Card



SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [CPAP] System One Resistance Control for Brevida Nasal Pillow Mask Nitschke 3 167 Yesterday, 08:01 PM
Last Post: Nitschke
  Cervical collar with xPAP question HalfAsleep 13 370 10-11-2017, 04:12 PM
Last Post: PaulaO2
  Respironics System One BIPAP ST Jeanine 2 180 09-21-2017, 04:22 PM
Last Post: trish6hundred
  Can xPap blow out the thorax Cpapian 11 300 09-20-2017, 01:37 PM
Last Post: Walla Walla
  Help me understand how humidifier levels are managed by the xPAP DanPrado 18 819 09-19-2017, 10:33 PM
Last Post: Wolfram
  PR System One Humidifier Problem gludden 7 196 09-16-2017, 03:17 PM
Last Post: trish6hundred
  Can you use a power strip with an xpap? HalfAsleep 24 921 09-16-2017, 12:12 AM
Last Post: Sheepish

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.