Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Hello - Help with REMStar Pro and Sleepyhead
#1
Hello - Help with REMStar Pro and Sleepyhead
[attachment=253]I am new here

I had a sleep study done & was diagnosed with a high Moderate apnea
During the first few weeks looking for info on the web I found the SleepyHead software from your forum (many Thanks) & was able to import the data from the Respironics System One machine I was given to use on a 5 week trial.

But now with my new Respironics REMstar Pro C-Flex+ I can't import any data, I see a quick blue flash of the progress bar at the bottom of the SleepyHead software but no new or any data from the new unit & SD card.

If I look at the data using my computer I see the same folder structure

P-Series & inside that file I see a file called last & a folder called P06112207D39A & inside that a file called properties containing

SerialNumber=P06112207D39A
ModelNumber=461CA
ProductType=0x34
DataFormat=UDF
DataFormatVersion=2
Family=0
FamilyVersion=4
SoftwareVersion=V3.01
FirstDate=1338941180
LastDate=1346778725
BasicKey=078001029ba1
DetailsKey=91e402020561
ErrorKey=000004006760
PatientFolderNum=0
PatientFileNum=60
EquipFileNum=0
TS=0,0,0,0,0,0,0,0,0,0,1,1
ValidCheck=c27d

And a flder called p0 containg a bunch of files called 0000000001 up to 0000000020.

Is there somthing I need to start or change before my new Respironics REMstar Pro C-Flex+ will copy the data from the hard drive to the SD card or should it be automatic wich could mean I a problem?

Any help would be greatly appreciated.

Thanks
Dan
Post Reply Post Reply
#2
RE: Hello
Hi dcgrafix, First, WELCOME! to the forum.! I don't know the answer to your questions but if you'll hang tight, someone will know the answers to help you shortly. Best of luck.
trish6hundred
Post Reply Post Reply
#3
RE: Hello
(09-04-2012, 03:08 PM)dcgrafix Wrote: Is there somthing I need to start or change before my new Respironics REMstar Pro C-Flex+ will copy the data from the hard drive to the SD card or should it be automatic wich could mean I a problem?

Any help would be greatly appreciated.

Thanks
Dan
If its the newer machine with the heated hose "60 series" then SH don,t support it yet
SH support PRS1 "50 series"
Post Reply Post Reply
#4
RE: Hello - Help with REMStar Pro and Sleepyhead
Dcgrafix, I changed the subject line to better reflect the help you are asking for.




PaulaO

Take a deep breath and count to zen.




Post Reply Post Reply
#5
RE: Hello - Help with REMStar Pro and Sleepyhead
(09-04-2012, 03:08 PM)dcgrafix Wrote: I am new here

I had a sleep study done & was diagnosed with a high Moderate apnea
During the first few weeks looking for info on the web I found the SleepyHead software from your forum (many Thanks) & was able to import the data from the Respironics System One machine I was given to use on a 5 week trial.

But now with my new Respironics REMstar Pro C-Flex+ I can't import any data, I see a quick blue flash of the progress bar at the bottom of the SleepyHead software but no new or any data from the new unit & SD card.

If I look at the data using my computer I see the same folder structure

P-Series & inside that file I see a file called last & a folder called P06112207D39A & inside that a file called properties containing

SerialNumber=P06112207D39A
ModelNumber=461CA
ProductType=0x34
DataFormat=UDF
DataFormatVersion=2
Family=0
FamilyVersion=4
SoftwareVersion=V3.01
FirstDate=1338941180
LastDate=1346778725
BasicKey=078001029ba1
DetailsKey=91e402020561
ErrorKey=000004006760
PatientFolderNum=0
PatientFileNum=60
EquipFileNum=0
TS=0,0,0,0,0,0,0,0,0,0,1,1
ValidCheck=c27d

And a flder called p0 containg a bunch of files called 0000000001 up to 0000000020.

Is there somthing I need to start or change before my new Respironics REMstar Pro C-Flex+ will copy the data from the hard drive to the SD card or should it be automatic wich could mean I a problem?

Any help would be greatly appreciated.

Thanks
Dan

(09-04-2012, 03:36 PM)zonk Wrote:
(09-04-2012, 03:08 PM)dcgrafix Wrote: Is there somthing I need to start or change before my new Respironics REMstar Pro C-Flex+ will copy the data from the hard drive to the SD card or should it be automatic wich could mean I a problem?

Any help would be greatly appreciated.

Thanks
Dan
If its the newer machine with the heated hose "60 series" then SH don,t support it yet
SH support PRS1 "50 series"

OK
Thanks guys
Does anyone know what will work & were to get it online?
I have tried many but having Win 7 64bit is making things very difficult.

Respironics - Encore Pro 1.8 Doesn't work
EncorePro2.2 Doesn't work
Respironics - Encore Pro 1.8 Doesn't work
Respironics EncorePro 2.4 64-bit has Install problems with SQL server

Haven't been able get Encore Viewer or Encore Viewer anywhere web based & don't get any replies to my enquiries from Respironics.

Thanks
Dan
Post Reply Post Reply
#6
RE: Hello - Help with REMStar Pro and Sleepyhead
For the PRS1 460 (60 series) you need EccoreBasic or Encore pro 2.8
I had the link to EncoreBasic from eaglett1111 but unfortunately its gone and get an error message when tried to download. Apology-2
Post Reply Post Reply
#7
RE: Hello - Help with REMStar Pro and Sleepyhead
i'm pretty sure 461 is 60 series and definitely is not compatible with sleepyhead 'yet'. also pretty sure it shows data and the only program that it will work with is encore basic which works with all windows operating systems.
First Diagnosed July 1990

MSgt (E-7) USAF (Medic)
Retired 1968-1990
Post Reply Post Reply
#8
RE: Hello - Help with REMStar Pro and Sleepyhead
Hi greatunclebill

Post Reply Post Reply
#9
RE: Hello - Help with REMStar Pro and Sleepyhead
(09-04-2012, 05:24 PM)dcgrafix Wrote:
(09-04-2012, 03:08 PM)dcgrafix Wrote: I am new here

I had a sleep study done & was diagnosed with a high Moderate apnea
During the first few weeks looking for info on the web I found the SleepyHead software from your forum (many Thanks) & was able to import the data from the Respironics System One machine I was given to use on a 5 week trial.

But now with my new Respironics REMstar Pro C-Flex+ I can't import any data, I see a quick blue flash of the progress bar at the bottom of the SleepyHead software but no new or any data from the new unit & SD card.

If I look at the data using my computer I see the same folder structure

P-Series & inside that file I see a file called last & a folder called P06112207D39A & inside that a file called properties containing

SerialNumber=P06112207D39A
ModelNumber=461CA
ProductType=0x34
DataFormat=UDF
DataFormatVersion=2
Family=0
FamilyVersion=4
SoftwareVersion=V3.01
FirstDate=1338941180
LastDate=1346778725
BasicKey=078001029ba1
DetailsKey=91e402020561
ErrorKey=000004006760
PatientFolderNum=0
PatientFileNum=60
EquipFileNum=0
TS=0,0,0,0,0,0,0,0,0,0,1,1
ValidCheck=c27d

And a flder called p0 containg a bunch of files called 0000000001 up to 0000000020.

Is there somthing I need to start or change before my new Respironics REMstar Pro C-Flex+ will copy the data from the hard drive to the SD card or should it be automatic wich could mean I a problem?

Any help would be greatly appreciated.

Thanks
Dan

(09-04-2012, 03:36 PM)zonk Wrote:
(09-04-2012, 03:08 PM)dcgrafix Wrote: Is there somthing I need to start or change before my new Respironics REMstar Pro C-Flex+ will copy the data from the hard drive to the SD card or should it be automatic wich could mean I a problem?

Any help would be greatly appreciated.

Thanks
Dan
If its the newer machine with the heated hose "60 series" then SH don,t support it yet
SH support PRS1 "50 series"

OK
Thanks guys
Does anyone know what will work & were to get it online?
I have tried many but having Win 7 64bit is making things very difficult.

Respironics - Encore Pro 1.8 Doesn't work
EncorePro2.2 Doesn't work
Respironics - Encore Pro 1.8 Doesn't work
Respironics EncorePro 2.4 64-bit has Install problems with SQL server

Haven't been able get Encore Viewer or Encore Viewer anywhere web based & don't get any replies to my enquiries from Respironics.

Thanks
Dan

(09-04-2012, 05:47 PM)zonk Wrote: For the PRS1 460 (60 series) you need EccoreBasic or Encore pro 2.8
I had the link to EncoreBasic from eaglett1111 but unfortunately its gone and get an error message when tried to download. Apology-2

Thanks Guys for all your help I will look around & if I find EccoreBasic or Encore pro 2.8 I will post a link.

Thanks
Dan
Post Reply Post Reply
#10
RE: Hello - Help with REMStar Pro and Sleepyhead
(09-04-2012, 06:47 PM)dcgrafix Wrote: Thanks Guys for all your help I will look around & if I find EccoreBasic or Encore pro 2.8 I will post a link.

Thanks
Dan

check your pm's.
First Diagnosed July 1990

MSgt (E-7) USAF (Medic)
Retired 1968-1990
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Philips replacement - SD card issues - REMStar Auto 60 series to Dream Station 1 JshMD 2 953 04-05-2023, 08:05 PM
Last Post: Aces
  Smart Card & Software for the old Respironics Remstar Auto M-Series ?? JoyD. 7 2,844 03-02-2023, 11:13 AM
Last Post: JoyD.
Ohmy Remstar Auto legacy data nolajoe 0 429 07-15-2021, 07:07 AM
Last Post: nolajoe
  remstar pro c-flex + memory card lost honklange 2 756 01-24-2021, 12:59 AM
Last Post: honklange
  Phillips remstar se sytem one staceyburke 3 712 01-18-2021, 07:59 PM
Last Post: sawinglogz
  data import issues with Philips Respironics REMstar Plus (System One) c-flex+ sark666 4 905 11-03-2020, 03:56 PM
Last Post: sawinglogz
  OSCAR can't read data from SD Card - REMstar Plus (System One 60 Serie LValadas 8 1,118 08-05-2020, 09:07 AM
Last Post: LValadas


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.