Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Help. Getting very discouraged. Need a mask that works with BiPAP setting at 18/12
#1
Help. Getting very discouraged. Need a mask that works with BiPAP setting at 18/12
Is there a mask or nasal pillow that will work with my BiPAP machine set at 18/12? I've tried three so far. 1st a ResMed nasal pillow that leaked bad. Next a Philips Respironics Nasal pillows Nuance pro which worked OK but I would mouth breath during REM I think. For the last week I wore a Fisher & Paykel Simplus full face mask.

The Fisher & Paykel Simplus full face mask is leaking so bad that it sounded like my face was farting. (Sorry for the crude reference but that is what it truly sounds like). I’m wondering if that mask is designed for 18 pressure. I gave up trying to sleep from 1:15 to 3:00 last night. I’m pretty discouraged with little hope of a solution. At 3:00, in a desperate effort to try something, I went back to the Philips Respironics Nasal pillows Nuance pro. It worked better. I think when I'm in REM sleep my mouth drops open. Is there some kind of sling that I could use to keep my mouth closed? Or some other kind of solution? Thanks for any help. I'm so exhausted that I'm getting depressed.
Post Reply Post Reply
#2
RE: Help. Getting very discouraged. Need a mask that works with BiPAP setting at 18/12
Both myself and PaytonA use the Resmed Mirage Quattro FFM; and we both run pressures in the high range.
Admin Note:
JustMongo passed away in August 2017
Click HERE to read his Memorial Thread

~ Rest in Peace ~
Post Reply Post Reply
#3
RE: Help. Getting very discouraged. Need a mask that works with BiPAP setting at 18/12
My brother runs 13/20. He currently uses Fisher&Paykel Forma (https://www.fphcare.com/products/forma-full-face-mask/). He has some leaks along mouth that the doctor says will be eliminated with a chin strap.

Prior to his stroke, he used the F&P Flexifit 432 (https://www.fphcare.com/products/flexifi...face-mask/).

Your face can change shape, but I know these ones work at higher pressures (also with beards).
Post Reply Post Reply
#4
RE: Help. Getting very discouraged. Need a mask that works with BiPAP setting at 18/12
Masks are certainly a preference thing. There are many factors. I would encourage you tonstary with full mask or nasal for a while; pillows arw a little harder at first, especially with higher pressure. It sounds like you may be a mouth breather, or at least possible. I used a chin strap for a while, but have recently gave up the strap. Seems like I am not breathing through my mouth like I was; perhaps I never was a
Mouth breather, just needed more air at times. Keep trying masks until u find one that works. Bu the way, less is more on how tight. It looks like many have leak problems from being too tight.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [CPAP] CPAP works, but at the same time doesn't AUniqueUsername 8 175 Yesterday, 08:17 AM
Last Post: OpalRose
  Resmed Airsense 10 time to return to low pressure setting jfchap 3 133 04-13-2024, 03:54 PM
Last Post: SarcasticDave94
  Tube Temp and Humidity Setting To Avoid Rainout tomkelly 10 275 04-11-2024, 11:11 PM
Last Post: tomkelly
  Trigger Setting Switch - Aircurve 10 MrIvanDrago 4 154 04-09-2024, 12:35 PM
Last Post: MrIvanDrago
  CPAP to ASV setting translation? Moemah123 2 521 04-03-2024, 10:30 AM
Last Post: Yujiyun
Question Not Sure if Setting Changes Helping - Help Appreciated! WiscoKate 6 257 03-25-2024, 11:54 AM
Last Post: WiscoKate
  Which biPAP? HalfAsleep 9 374 03-14-2024, 09:04 AM
Last Post: HalfAsleep


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.