Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Help interpreting data
#1
Help interpreting data
   


I am relatively new to the board and have been using a CPAP for about 1 1/2 years.  The pressure was set at 9 and at first was working as far as I could tell.  Recently my wife has informed me that my snoring is getting worse and it seemed like adjustments had to be made so I started researching how to adjust the machine and software to view results.  I've joined the forum and downloaded manuals and software but don't understand what I am looking at.  I recently changed the machine to apap with low pressure at 9 and high at 13.  I found that it was at max pressure for most of the night and recently adjusted to 10 and 14 with the same results.  Knowing that I don't know what I'm looking at I am asking for some advice on what to do next.  Attached is last nights data and while my AHI was low, RERA seems high and snoring is high as well.  Any help or advice is greatly appreciated.
Post Reply Post Reply






Donate to Apnea Board  
#2
RE: Help interpreting data
It looks like your max pressure is still too low and you're still having respiratory events. You can see the pressure hitting the ceiling when your snores start. I would suggest increasing the max further by a good amount.
Post Reply Post Reply
#3
RE: Help interpreting data
I would like to see you drop the Tidal Volume Chart and add the flow limit chart
(goto 'View/Reset Graphs/Standard')

You are having excessive Flow Limitations, Flow Limits are what is driving your pressure up.
I am also concerned about your RERAs. RERAs are defined as a series of Flow Limitations, see the connection, ending with Arousal. Needless to say arousals disturb your sleep.

I want you to set the EPR = 3, fulltime, it is currently set to '2'.

Then let's see what you have. Post the charts for review.
Fred Bonjour - Project Manager and Lead Tester for OSCAR - Open Source CPAP Analysis Reporter 
OSCAR

Download OSCAR
New to Apnea? Helpful tips to ensure success
Soft Cervical Collar
Mask Primer
Dealing with a DME
Organize Charts
Attaching Charts

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#4
RE: Help interpreting data
I will make adjustments tonight and post the results. I'll update last night's chart as requested when I get back to my pc. Thank you for the feedback.
Post Reply Post Reply






Donate to Apnea Board  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Viewing Old Data Without Importing New data from an SD Card mjrPdqkLguUgGLE 5 86 Yesterday, 05:18 PM
Last Post: mjrPdqkLguUgGLE
  Dreamstation CPAP vs Aircurve BiPap data? Data over time for Insp/Exp? Desiree 12 254 05-20-2020, 10:00 PM
Last Post: Sleeprider
  Interpreting OSCAR letsrun100 47 775 05-19-2020, 08:44 PM
Last Post: letsrun100
  [CPAP] New Oscar user needs help interpreting Elizabeth2987 3 105 05-12-2020, 07:46 PM
Last Post: OpalRose
  [CPAP] Help Interpreting OSCAR Data ExitLightEnterNight 0 154 04-20-2020, 06:19 PM
Last Post: ExitLightEnterNight
  Need help interpreting OSCAR data Chalkie 14 236 04-20-2020, 11:06 AM
Last Post: Chalkie
Question New here, loaded data to OSCAR - only summary data swampbastard99 5 227 03-10-2020, 01:43 PM
Last Post: Crimson Nape


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.