Post Reply 
Help with data
Author Message
andersgeorgsson Offline

Preferred Members

Posts: 25
Joined: Jun 2012

Machine: PRS1 Auto
Mask Type: Nasal mask
Mask Make & Model:
Humidifier: PRS1 Heated
CPAP Pressure: 9
CPAP Software: Other Software

Other Comments: PR EasyLife mask/EncoreBasic

Sex: Male
Location: North Florida, USA

Post: #11
RE: Help with data
(06-19-2012 08:01 AM)Bobmac27 Wrote:  Did you import the whole P folder into Sleepyhead?

I pointed it to the root of the SD card in which the "P-series" was the only folder/file.

Any other folder gives "Import Problem"..
06-19-2012 08:27 AM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Bobmac27 Offline

Members

Posts: 18
Joined: Jun 2012

Machine: REMstar Pro C-Flex +
Mask Type: Full face mask
Mask Make & Model: ResMed Quattro FX
Humidifier: System One
CPAP Pressure: 9
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location: New Jersey

Post: #12
RE: Help with data
I am new to CPAP and the Sleepy Head software but you seem to be doing everything correct. It would seem that the machine is not recording.
06-19-2012 08:53 AM
Find all posts by this user Post Reply Quote this message in a reply
Sleepster Offline
Wiki Editor
Moderators

Posts: 4,995
Joined: Feb 2012

Machine: ResMed AirCurve10 VAuto
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: HumidAir and SlimLine Hose
CPAP Pressure: MaxI 13.6 | MinE 5.2 | PS 4.4
CPAP Software: ResScan SleepyHead

Other Comments: Diagnosed Nov 2011. Conquered aerophagia.

Sex: Male
Location: Houston, Texas

Post: #13
RE: Help with data
(06-19-2012 08:27 AM)andersgeorgsson Wrote:  I pointed it to the root of the SD card in which the "P-series" was the only folder/file.

Unfortunately, SleepyHead does this on very rare occasions. (It is a beta release!)

Put the card back in your CPAP machine. Wait for the normal display to appear on the screen. Re-boot the CPAP. This probably won't work, but it's worth a try.

Chances are, tomorrow you will be able to see the data. Meanwhile, you can look at the machine's on-screen display. On the "Info" menu you can see the AHI, percent time spent in large leak, and percent time spent in periodic breathing.

Look for a PM from me.

Sleepster
Apnea Board Moderator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
(This post was last modified: 06-19-2012 10:58 AM by Sleepster.)
06-19-2012 10:49 AM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
andersgeorgsson Offline

Preferred Members

Posts: 25
Joined: Jun 2012

Machine: PRS1 Auto
Mask Type: Nasal mask
Mask Make & Model:
Humidifier: PRS1 Heated
CPAP Pressure: 9
CPAP Software: Other Software

Other Comments: PR EasyLife mask/EncoreBasic

Sex: Male
Location: North Florida, USA

Post: #14
RE: Help with data
(06-19-2012 10:49 AM)Sleepster Wrote:  
(06-19-2012 08:27 AM)andersgeorgsson Wrote:  I pointed it to the root of the SD card in which the "P-series" was the only folder/file.

Unfortunately, SleepyHead does this on very rare occasions. (It is a beta release!)

Put the card back in your CPAP machine. Wait for the normal display to appear on the screen. Re-boot the CPAP. This probably won't work, but it's worth a try.

Chances are, tomorrow you will be able to see the data. Meanwhile, you can look at the machine's on-screen display. On the "Info" menu you can see the AHI, percent time spent in large leak, and percent time spent in periodic breathing.

Look for a PM from me.

I now remember seeing that my machine is running software version 3.0 - is this what everyone else uses? Just kind of curious Smile

I looked a couple of the files, kind of cool they use "Unix Timestamp" for their date/time..

One thing that I noticed is that sleepyhead was able to read machine and serial number, but not time/date of first/last use...

What you suggested in the PM didn't work...
It says that it can't read and to contact tech support... Dont-know
06-19-2012 01:04 PM
Find all posts by this user Post Reply Quote this message in a reply
archangle Offline
Wiki Editor
Advisory Members

Posts: 3,159
Joined: Feb 2012

Machine: ResMed S9 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: ResMed Swift FX
Humidifier: ResMed S9 H5i
CPAP Pressure: 16-20
CPAP Software: ResScan SleepyHead EncoreBasic

Other Comments: Happy PAPper

Sex: Undisclosed
Location: USA

Post: #15
RE: Help with data
(06-19-2012 05:03 AM)andersgeorgsson Wrote:  I got my machine yesterday - went to bed around 9.30pm and slept with it on all of the night (except a few wake ups),
when I look in the "P-series" folder - there is data from the System One Auto machine I have - but when I import into
sleepy head - I can see my machine serial - but it says no cpap data imported. What could I be doing wrong?

F:\ is my SD-Card reader slot - and that is where I am importing from... (Windows 7, 64bit by the way)

Any help is appreciated Smile

You have the PRS1 Model 60 Auto. (560P) SleepyHead doesn't work with that yet.

The author of SleepyHead is dealing with some other issues and hasn't updated the software yet.

Get the free SleepyHead software here.
Useful links.
Click here for information on the main alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check it yourself.
06-19-2012 02:44 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Sleepster Offline
Wiki Editor
Moderators

Posts: 4,995
Joined: Feb 2012

Machine: ResMed AirCurve10 VAuto
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: HumidAir and SlimLine Hose
CPAP Pressure: MaxI 13.6 | MinE 5.2 | PS 4.4
CPAP Software: ResScan SleepyHead

Other Comments: Diagnosed Nov 2011. Conquered aerophagia.

Sex: Male
Location: Houston, Texas

Post: #16
RE: Help with data
(06-19-2012 02:44 PM)archangle Wrote:  You have the PRS1 Model 60 Auto. (560P) SleepyHead doesn't work with that yet.

The author of SleepyHead is dealing with some other issues and hasn't updated the software yet.

Ouch! So, what's the model number of the older PRS1 Auto that does work with SleepyHead?

Sleepster
Apnea Board Moderator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
(This post was last modified: 06-19-2012 03:51 PM by Sleepster.)
06-19-2012 03:50 PM
Find all posts by this user Post Reply Quote this message in a reply
zonk Offline

Advisory Members

Posts: 7,908
Joined: Feb 2012

Machine: A10 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Activa LT
Humidifier: Integrated /ClimateLineAir
CPAP Pressure: 9/13
CPAP Software: ResScan

Other Comments: CPAP since Nov 2010

Sex: Male
Location: Australia

Post: #17
RE: Help with data
(06-19-2012 03:50 PM)Sleepster Wrote:  
(06-19-2012 02:44 PM)archangle Wrote:  The author of SleepyHead is dealing with some other issues and hasn't updated the software yet.

Ouch! So, what's the model number of the older PRS1 Auto that does work with SleepyHead?
SleepyHead support all PRS1 machines and don,t support the older models or the newer P60 series
06-19-2012 03:54 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Sleepster Offline
Wiki Editor
Moderators

Posts: 4,995
Joined: Feb 2012

Machine: ResMed AirCurve10 VAuto
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: HumidAir and SlimLine Hose
CPAP Pressure: MaxI 13.6 | MinE 5.2 | PS 4.4
CPAP Software: ResScan SleepyHead

Other Comments: Diagnosed Nov 2011. Conquered aerophagia.

Sex: Male
Location: Houston, Texas

Post: #18
RE: Help with data
(06-19-2012 03:50 PM)Sleepster Wrote:  
(06-19-2012 02:44 PM)archangle Wrote:  You have the PRS1 Model 60 Auto. (560P) SleepyHead doesn't work with that yet.

The author of SleepyHead is dealing with some other issues and hasn't updated the software yet.

Ouch! So, what's the model number of the older PRS1 Auto that does work with SleepyHead?

I think it's the model 550P.

Zonk, I think SleepyHead supports all PRS1 machines except the 560P.

Sleepster
Apnea Board Moderator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
06-19-2012 06:11 PM
Find all posts by this user Post Reply Quote this message in a reply
zonk Offline

Advisory Members

Posts: 7,908
Joined: Feb 2012

Machine: A10 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Activa LT
Humidifier: Integrated /ClimateLineAir
CPAP Pressure: 9/13
CPAP Software: ResScan

Other Comments: CPAP since Nov 2010

Sex: Male
Location: Australia

Post: #19
RE: Help with data
(06-19-2012 06:11 PM)Sleepster Wrote:  Zonk, I think SleepyHead supports all PRS1 machines except the 560P.
Its what i said SH don,t support P60 series which is 560P...Right or ?
06-19-2012 06:23 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Sleepster Offline
Wiki Editor
Moderators

Posts: 4,995
Joined: Feb 2012

Machine: ResMed AirCurve10 VAuto
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: HumidAir and SlimLine Hose
CPAP Pressure: MaxI 13.6 | MinE 5.2 | PS 4.4
CPAP Software: ResScan SleepyHead

Other Comments: Diagnosed Nov 2011. Conquered aerophagia.

Sex: Male
Location: Houston, Texas

Post: #20
RE: Help with data
(06-19-2012 06:23 PM)zonk Wrote:  Its what i said SH don,t support P60 series which is 560P...Right or ?

Yes, but it is a PRS1.

Sleepster
Apnea Board Moderator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
06-19-2012 08:39 PM
Find all posts by this user Post Reply Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Sleepyhead data vs. Doctor's data Daisylouu 8 1,403 09-01-2016 06:10 PM
Last Post: eseedhouse
  Revised Post Regarding "I need help with SH data" - with data included! Jeffo1 3 593 05-16-2016 11:28 PM
Last Post: Jeffo1
  Data viewer for 960 BiPAP AutoSV / Missing data pswartz 5 2,254 10-06-2014 02:31 PM
Last Post: pswartz
  Does reading the data card erase the data? Marnid2014 22 8,563 03-12-2014 12:36 PM
Last Post: retired_guy

Forum Jump:

Who's Online (Complete List)