Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Help with data
#11
RE: Help with data
(06-19-2012, 08:01 AM)Bobmac27 Wrote: Did you import the whole P folder into Sleepyhead?

I pointed it to the root of the SD card in which the "P-series" was the only folder/file.

Any other folder gives "Import Problem"..



Post Reply Post Reply
#12
RE: Help with data
I am new to CPAP and the Sleepy Head software but you seem to be doing everything correct. It would seem that the machine is not recording.
Post Reply Post Reply
#13
RE: Help with data
(06-19-2012, 08:27 AM)andersgeorgsson Wrote: I pointed it to the root of the SD card in which the "P-series" was the only folder/file.

Unfortunately, SleepyHead does this on very rare occasions. (It is a beta release!)

Put the card back in your CPAP machine. Wait for the normal display to appear on the screen. Re-boot the CPAP. This probably won't work, but it's worth a try.

Chances are, tomorrow you will be able to see the data. Meanwhile, you can look at the machine's on-screen display. On the "Info" menu you can see the AHI, percent time spent in large leak, and percent time spent in periodic breathing.

Look for a PM from me.
Sleepster

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#14
RE: Help with data
(06-19-2012, 10:49 AM)Sleepster Wrote:
(06-19-2012, 08:27 AM)andersgeorgsson Wrote: I pointed it to the root of the SD card in which the "P-series" was the only folder/file.

Unfortunately, SleepyHead does this on very rare occasions. (It is a beta release!)

Put the card back in your CPAP machine. Wait for the normal display to appear on the screen. Re-boot the CPAP. This probably won't work, but it's worth a try.

Chances are, tomorrow you will be able to see the data. Meanwhile, you can look at the machine's on-screen display. On the "Info" menu you can see the AHI, percent time spent in large leak, and percent time spent in periodic breathing.

Look for a PM from me.

I now remember seeing that my machine is running software version 3.0 - is this what everyone else uses? Just kind of curious Smile

I looked a couple of the files, kind of cool they use "Unix Timestamp" for their date/time..

One thing that I noticed is that sleepyhead was able to read machine and serial number, but not time/date of first/last use...

What you suggested in the PM didn't work...
It says that it can't read and to contact tech support... Dont-know
Post Reply Post Reply
#15
RE: Help with data
(06-19-2012, 05:03 AM)andersgeorgsson Wrote: I got my machine yesterday - went to bed around 9.30pm and slept with it on all of the night (except a few wake ups),
when I look in the "P-series" folder - there is data from the System One Auto machine I have - but when I import into
sleepy head - I can see my machine serial - but it says no cpap data imported. What could I be doing wrong?

F:\ is my SD-Card reader slot - and that is where I am importing from... (Windows 7, 64bit by the way)

Any help is appreciated Smile

You have the PRS1 Model 60 Auto. (560P) SleepyHead doesn't work with that yet.

The author of SleepyHead is dealing with some other issues and hasn't updated the software yet.
Get the free OSCAR CPAP software here.
Useful links.
Click here for information on the main alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check it yourself.
Post Reply Post Reply
#16
RE: Help with data
(06-19-2012, 02:44 PM)archangle Wrote: You have the PRS1 Model 60 Auto. (560P) SleepyHead doesn't work with that yet.

The author of SleepyHead is dealing with some other issues and hasn't updated the software yet.

Ouch! So, what's the model number of the older PRS1 Auto that does work with SleepyHead?

Sleepster

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#17
RE: Help with data
(06-19-2012, 03:50 PM)Sleepster Wrote:
(06-19-2012, 02:44 PM)archangle Wrote: The author of SleepyHead is dealing with some other issues and hasn't updated the software yet.

Ouch! So, what's the model number of the older PRS1 Auto that does work with SleepyHead?
SleepyHead support all PRS1 machines and don,t support the older models or the newer P60 series

Post Reply Post Reply
#18
RE: Help with data
(06-19-2012, 03:50 PM)Sleepster Wrote:
(06-19-2012, 02:44 PM)archangle Wrote: You have the PRS1 Model 60 Auto. (560P) SleepyHead doesn't work with that yet.

The author of SleepyHead is dealing with some other issues and hasn't updated the software yet.

Ouch! So, what's the model number of the older PRS1 Auto that does work with SleepyHead?

I think it's the model 550P.

Zonk, I think SleepyHead supports all PRS1 machines except the 560P.
Sleepster

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#19
RE: Help with data
(06-19-2012, 06:11 PM)Sleepster Wrote: Zonk, I think SleepyHead supports all PRS1 machines except the 560P.
Its what i said SH don,t support P60 series which is 560P...Right or ?

Post Reply Post Reply
#20
RE: Help with data
(06-19-2012, 06:23 PM)zonk Wrote: Its what i said SH don,t support P60 series which is 560P...Right or ?

Yes, but it is a PRS1.
Sleepster

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Doctor says perfect data, but extremely tired - OSCAR Data Auzzyrocks 13 2,651 12-04-2022, 11:25 AM
Last Post: Lucid
Question [Pressure] Doctor can't see detailed data - Can my OSCAR data save me from another sleep study? KidCharlamagne 5 896 09-28-2022, 08:20 AM
Last Post: Gideon
  [CPAP] Data showing clear airway apneas: central apnea or soft palate collapse? Data inc. JamesD0079 0 798 03-21-2022, 07:50 PM
Last Post: JamesD0079
  Dreamstation CPAP vs Aircurve BiPap data? Data over time for Insp/Exp? Desiree 12 2,281 05-20-2020, 10:00 PM
Last Post: Sleeprider
  IF I insert an SD card to get data for Sleepyhead will my ResMed still send data theMezz 3 2,072 04-20-2018, 07:52 PM
Last Post: theMezz
  Data viewer for 960 BiPAP AutoSV / Missing data pswartz 5 4,059 10-06-2014, 02:31 PM
Last Post: pswartz


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.