Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Help with respironics system one
#11
Thank you very much for the in depth info.  I tried it last night with the heated hose at 4 and the humidity at 3.  It felt a little too warm but not overly humid.  Would you say there is a machine better for humidity over others?
Post Reply Post Reply
#12
(02-16-2017, 09:57 PM)Philipg33 Wrote: Thank you very much for the in depth info.  I tried it last night with the heated hose at 4 and the humidity at 3.  It felt a little too warm but not overly humid.  Would you say there is a machine better for humidity over others?

If it feels to warm drop hose temp to 3.

  Humidity setting of three is 80 or 90 % humidity messured by the sensor in the mask end of the heated hose.

Id have to get the manual to remember if it's 80 or 90 %.

    The machine WILL put that selected humidity at the mask.   Unless the room humidity is higher in which case the machine won't act as a dehumidifier to lower ambient room humidity.

   If your mouth or nose still feel dried out check for excessive mask leaks.

    Excessive mask leaks create a hyper fast air flow thru the humidifier hose and mask that is too fast for the humidifier on any machine to keep up with.

    Same principle as dry mouth from mouth leaking in a nasal mask.

Some machines are better with humidity vs rain out than others

You have one of the top two. IMO the PR560 is capable of delivering as much humidty to mask without rain out as any machine on the market.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  PR System One Tube Heating locked off. truwest 9 130 01-17-2018, 10:48 AM
Last Post: OpalRose
  [Equipment] Respironics Dream Stn Cellular in Australia Moriarty 4 133 01-10-2018, 04:48 AM
Last Post: Moriarty
Ohmy Respironics Mask Settings? Dawnstar 2 193 01-03-2018, 01:04 AM
Last Post: fwg1947
  [Admin Note] WANTED: CLINICIAN SETUP MANUAL for 60-series PR System One REMstar Plus w/ C-Flex SuperSleeper 6 565 12-31-2017, 10:20 PM
Last Post: SuperSleeper
  DreamStation DSX500 or Respironics DS560 quatrain 8 214 12-30-2017, 09:32 PM
Last Post: Sleeprider
  PR System One Mask Resistance Settings sharkcity 19 19,243 12-23-2017, 09:16 PM
Last Post: bspengler
Money Just Bought an Apex Medical XT Auto CPAP System Heated Humidifier TimtheEnchanter 5 295 12-18-2017, 05:49 PM
Last Post: Mosquitobait

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.