Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Importing of data problem
#11
RE: Importing of data problem
Quote:Do you think, since I have an Autoset machine, I should take advantage of its "auto" capabilities?

Yes, all things being equal an autoset will give you good treatment at a lower average pressure than a straight CPAP. This is especially true if your apnea is positional (ie if it gets worse when you lie on your back rather than your side).

Quote:Or, since I've seemed to do OK at a constant 11, should I have them set it to operate in regular, non-auto, CPAP mode?

See above. Now, it is sometimes the case that people revert to a constant pressure after having used the autoset, but most do better in auto mode on a limited range. The problem (as I described above) is that if the machine is set wide open it will have problems optimising the treatment. Also the wide pressure range can cause discomfort which will interfere with your sleep.

Quote:(And a related question: would it still collect the full range of data if operating in CPAP mode?)

Yes, it will collect full data in all modes.
Post Reply Post Reply
#12
RE: Importing of data problem
is 4 comfortable? If mine is set at 4 I feel like I am suffocating..... My start range for an auto-titration (never had the titration study, went straight to APAP) was 6 and a year later I am starting at 8. For starters, use a higher pressure for the minimum, since your titrated CPAP pressure was 11, and you did not have any comfort issue with 11 --- 8 might be a great place to start. If it were me I would set it 8 to 15 with a fulltime EPR = 2 and then look at the data after a week. unless AHI goes up a lot, then I would re-evaluate sooner.
هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه  هههههه
Tongue Suck Technique for prevention of mouth breathing:
  • Place your tongue behind your front teeth on the roof of your mouth
  • let your tongue fill the space between the upper molars
  • gently suck to form a light vacuum

Practising during the day can help you to keep it at night

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه  هههههه
Post Reply Post Reply
#13
RE: Importing of data problem
(01-08-2016, 08:53 AM)AlanE Wrote: Is there anything on the SD card? In the DATALOG folder there should be subfolders. They are named by date. YYYYMMDD. Last night's folder might be named 20160107

You should see files similar to these:

Volume in drive G is RESMED
Volume Serial Number is D484-950F

Directory of G:\DATALOG\20160106

01/07/2016 08:13 AM <DIR> .
01/07/2016 08:13 AM <DIR> ..
01/07/2016 08:13 AM 8 20160106_214117_CSL.crc
01/07/2016 08:13 AM 800 20160106_214117_CSL.edf
01/07/2016 08:13 AM 8 20160106_214117_EVE.crc
01/07/2016 08:13 AM 1,008 20160106_214117_EVE.edf
01/07/2016 08:13 AM 8 20160106_214121_BRP.crc
01/07/2016 08:13 AM 3,176,082 20160106_214121_BRP.edf
01/07/2016 08:13 AM 8 20160106_214121_PLD.crc
01/07/2016 08:13 AM 289,534 20160106_214121_PLD.edf
01/07/2016 08:13 AM 8 20160106_214121_SAD.crc
01/07/2016 08:13 AM 129,042 20160106_214121_SAD.edf

Post Reply Post Reply
#14
RE: Importing of data problem
(01-08-2016, 08:53 AM)AlanE Wrote: Is there anything on the SD card? In the DATALOG folder there should be subfolders. They are named by date. YYYYMMDD. Last night's folder might be named 20160107

You should see files similar to these:

Volume in drive G is RESMED
Volume Serial Number is D484-950F

Directory of G:\DATALOG\20160106

01/07/2016 08:13 AM <DIR> .
01/07/2016 08:13 AM <DIR> ..
01/07/2016 08:13 AM 8 20160106_214117_CSL.crc
01/07/2016 08:13 AM 800 20160106_214117_CSL.edf
01/07/2016 08:13 AM 8 20160106_214117_EVE.crc
01/07/2016 08:13 AM 1,008 20160106_214117_EVE.edf
01/07/2016 08:13 AM 8 20160106_214121_BRP.crc
01/07/2016 08:13 AM 3,176,082 20160106_214121_BRP.edf
01/07/2016 08:13 AM 8 20160106_214121_PLD.crc
01/07/2016 08:13 AM 289,534 20160106_214121_PLD.edf
01/07/2016 08:13 AM 8 20160106_214121_SAD.crc
01/07/2016 08:13 AM 129,042 20160106_214121_SAD.edf

I was able to get data for about a week, now am back to original problem. And no, I do not see that the data has been imported since 1/14/16 according to my datalog. Do you think it's a problem with my Resmed card, or Sleepyhead?
Post Reply Post Reply
#15
RE: Importing of data problem
(01-15-2016, 10:30 PM)WachetAuf Wrote:
(01-15-2016, 09:45 PM)DeepBreathing Wrote: The 4 - 20 pressure range is what we call "wide open" and is often (usually) unsatisfactory.

Huh, interesting. Do you think, since I have an Autoset machine, I should take advantage of its "auto" capabilities? Or, since I've seemed to do OK at a constant 11, should I have them set it to operate in regular, non-auto, CPAP mode? (And a related question: would it still collect the full range of data if operating in CPAP mode?)
Yes, the AutoSense 10 records complete data in all modes.
And it can all be read via SleepyHead on a Mac.

It's easy to change the settings on the AutoSense 10, and SleepyHead will track them for you.

Bill Magill
Retired computing and networking professional
(ARPAnet, Unix and Mac OSX)
"People assume that time is a strict progression of cause to effect,
but actually — from a non-linear, non-subjective viewpoint —
it's more like a big ball of wibbly-wobbly... timey-wimey... stuff."
The Doctor
Post Reply Post Reply
#16
RE: Importing of data problem
(01-18-2016, 01:35 PM)Koobie Wrote: I was able to get data for about a week, now am back to original problem. And no, I do not see that the data has been imported since 1/14/16 according to my datalog. Do you think it's a problem with my Resmed card, or Sleepyhead?

I'm leaning towards it being something other than SleepyHead. What you could try, assuming you are using Windows, is download ResScan and see if that reads anymore data than SH.

http://www.apneaboard.com/forums/Thread-...hines-only

Take note of the Installation Warning on that page.

If ResScan matches up with Sleepyhead, you'll know it will be either the card or the CPAP machine. Since SD cards are much cheaper, I would buy another card. Can be another 2gb card to save some money though I think 8gb cards are just as cheap.
Using FlashAir W-03 SD card in machine. You can download your data through wifi with FlashPAP or Sleep Master utilities.

I wanted to learn Binary so I enrolled in Binary 101. I seemed to have missed the first four courses. Big Grinnie

Stick it to the man, Download OSCAR and take back control of your data!

Thanks Ian. Like I didn't have enough Honey-Do projects to tackle. Mornincoffee
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Question OK TO IMPORT SLEEP DATA FROM OLD SD CARD INTO OSCAR W/O MESSING UP CURRENT DATA? Plmnb 1 80 Yesterday, 01:07 AM
Last Post: Ibrumley
  Trouble importing data to Oscar bubbafoxus 2 88 03-22-2024, 05:40 PM
Last Post: bubbafoxus
  There's 1.5 years of data in my OSCAR, but now there's a problem Snackers 8 227 03-19-2024, 03:36 AM
Last Post: Snackers
  problem downloading OSCAR SOFTWARE Bailey104 1 90 03-15-2024, 05:49 PM
Last Post: Crimson Nape
  Importing Oximetry data billmelk 1 138 03-10-2024, 02:27 PM
Last Post: Crimson Nape
  Viatom/WellUE data is different than OSCAR displayed data GordK 3 292 02-23-2024, 04:48 PM
Last Post: GordK
  Data structure / data definition of AirSense 11 CD, CMSd50+ or OSCAR?hing obvious, … Perickson 4 1,632 02-18-2024, 01:49 PM
Last Post: Perickson


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.