Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Is it possible to open the white part of the water chamber?
#1
Is it possible to open the white part of the water chamber?
Hi everybody!

The Resmed S10 water chamber has a white part that is located on top of the chamber. it's a small milky white part. 

Is it possible to open it and fill the container from there?

Regards!
Post Reply Post Reply



Donate to Apnea Board  
#2
RE: Is it possible to open the white part of the water chamber?
I don't believe so. I think it is just there as an aid to gripping the chamber when inserting it and removing it from the chamber. If you were to pour water there much of it would run out through the port to the machine. Do you have some objection to just opening the lid and adding water as shown in the manual?
Download OSCAR

Organize Charts
Attaching Charts

Mask Primer
Soft Cervical Collar

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.

Post Reply Post Reply
#3
RE: Is it possible to open the white part of the water chamber?
At first, I was sure it must open. It would be ideal to pour water through there, especially because of how difficult it is to pull that chamber out.

I've pulled at it a ton, and have become convinced it doesn't come off.
Post Reply Post Reply
#4
RE: Is it possible to open the white part of the water chamber?
No I don’t think so. The folks at ResMed want you to get a little grip exercise so pull the tub out of the machine and go from there.
Dave
I'm not a doctor in real or fictional life. My posts include opinions based upon user experience and researched info regarding CPAP therapy and should not be considered medically professional directions or advice.

OSCAR Chart Organization
Mask Primer
Dealing With DME
Post Reply Post Reply



Donate to Apnea Board  
#5
RE: Is it possible to open the white part of the water chamber?
That white panel is just a thump grip panel.
Post Reply Post Reply
#6
RE: Is it possible to open the white part of the water chamber?
I think Resmed designed it this way so you have to remove it to fill. I would imagine people would be less likely to remove and clean the humidifier tub if it could be filled in place.
Post Reply Post Reply
#7
RE: Is it possible to open the white part of the water chamber?
(08-05-2019, 12:44 PM)Coffee Man Wrote: I think Resmed designed it this way so you have to remove it to fill. I would imagine people would be less likely to remove and clean the humidifier tub if it could be filled in place.

I'm thinking the same thing. Of all my CPAP equipment, I give the water reservoir the most attention. Daily, as a matter-of-fact.
Post Reply Post Reply



Donate to Apnea Board  
#8
RE: Is it possible to open the white part of the water chamber?
(08-05-2019, 12:48 PM)Big Guy Wrote: I'm thinking the same thing. Of all my CPAP equipment, I give the water reservoir the most attention. Daily, as a matter-of-fact.

I do too. I top it off. Smile
Download OSCAR

Organize Charts
Attaching Charts

Mask Primer
Soft Cervical Collar

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.

Post Reply Post Reply
#9
RE: Is it possible to open the white part of the water chamber?
(08-05-2019, 12:44 PM)Coffee Man Wrote: I think Resmed designed it this way so you have to remove it to fill. I would imagine people would be less likely to remove and clean the humidifier tub if it could be filled in place.

Resmed has definitely done some deliberate consumer inconveniences that are cleverly designed to be helpful. The travel bag compartments are one example. You have to pull the tank out to put the A10 in the bag. That way are less likely to load it into the bag with water still in the tank, killing the device. Same goes for having to pull the tank out to fill it. Over filling it could damage the machine. Having to take it out reduces the chance of an over fill spilling into the machine.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [CPAP] Water in Mask smorris298 6 68 3 hours ago
Last Post: smorris298
  Water coming up heated hose larryslade66 5 243 01-25-2020, 04:29 PM
Last Post: larryslade66
  [CPAP] Possible Issue? Using a lot more water than before 3-5x sndraco 15 566 01-14-2020, 01:03 PM
Last Post: sndraco
Question Respironics System One Humidifier runs out of water DISleepApnea 8 489 12-11-2019, 07:50 PM
Last Post: SorryIamNormal
  Water protection in Airsense 10 coimeten2099 0 5,567 12-03-2019, 06:21 AM
Last Post: coimeten2099
  [Pressure] APAP Tuning Part Two jgunders 5 248 11-29-2019, 03:39 PM
Last Post: SarcasticDave94
  Ozone Generators and Water Chambers Tinwoodsman 3 397 11-03-2019, 11:40 AM
Last Post: TheDuke


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.