Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account



Last nights report
#1
Sleepyhead only shows 3hrs 45min when I slept 8hrs.
What happened?
Reply
#2
(03-31-2014, 11:38 AM)tired57 Wrote: Sleepyhead only shows 3hrs 45min when I slept 8hrs.
What happened?

Did you only sleep 3 hours and 45 minutes prior to 12 PM? If so, the reason you only see 3 hours and 45 minutes for yesterday is because all sleep after 12 PM would be with any hours that you sleep today up until 11:59 AM.
Reply
#3
sorry about your prob.. but...at least you got sleepyhead to do something.... (: i am a newbie with the data thing.... i am sure you will find answers here!
good luck to you...
Reply


#4
The clocks on the Respironics machines cannot be reset. They are set to UTC time. So you have to mentally recalculate when you went to bed and when you got up.

Check the night before and see if your missing hours are there. If they aren't, they may show up tomorrow.

You can figure out what time it is in UTC by going here: http://www.usno.navy.mil/USNO/time/displ...simpletime

Also, most machines believe the "Day" begins and ends at noon. So if you sleep beyond noon (whatever the machine thinks is noon), then it puts any time after that onto the next day.

For example, if you go to bed on the 14th at 9am and sleep until 5pm, you've slept 8 hrs. But your machine will say you slept 3hrs on the 13th and 5 hrs on the 14th. Confused? Good. Most of us are until we just give up and say "Okay, you win."

PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.




Reply
#5
paula... that is just weird... and in a strange way .. funny...
Reply
#6
(03-31-2014, 12:00 PM)me50 Wrote:
(03-31-2014, 11:38 AM)tired57 Wrote: Sleepyhead only shows 3hrs 45min when I slept 8hrs.
What happened?

Did you only sleep 3 hours and 45 minutes prior to 12 PM? If so, the reason you only see 3 hours and 45 minutes for yesterday is because all sleep after 12 PM would be with any hours that you sleep today up until 11:59 AM.

But there is no data after midnight.

Reply


#7
http://s1262.photobucket.com/user/fastfi...4.png.html
Reply
#8
http://s1262.photobucket.com/user/fastfi...3.png.html

Here's the whole nights report.

I forgot I'd got up one time last night.
Reply
#9
The stuff at around 1:15AM looks like you were turning over, so can probably be ignored. The stuff at 3:30AM looks like you were awake and getting up, possibly holding your breath as you did so, so I'd ignore those too.

It looks like SleepyHead glitched on your pressure readings. [ Mine does that as well. ] The summary on the left indicates a pressure range of 4-7, but the graphs indicate a pressure range of 7-8.5. It looks like towards the 7:30-8:00 time frame, your pressure maxes out. You might consider eventually increasing your maximum pressure setting.

Except for the 1:15AM incident and 3:30AM when you got up (presumably taking off your mask before you actually turned the machine off), your leaks look quite good.

In summary, it looks pretty good.
Reply


#10
The night before my set pressure was 8.5 and it woke me up when it maxed, so I lowered a bit for last night.
I feel kind of better today.


(03-31-2014, 06:26 PM)RonWessels Wrote: The stuff at around 1:15AM looks like you were turning over, so can probably be ignored. The stuff at 3:30AM looks like you were awake and getting up, possibly holding your breath as you did so, so I'd ignore those too.

It looks like SleepyHead glitched on your pressure readings. [ Mine does that as well. ] The summary on the left indicates a pressure range of 4-7, but the graphs indicate a pressure range of 7-8.5. It looks like towards the 7:30-8:00 time frame, your pressure maxes out. You might consider eventually increasing your maximum pressure setting.

Except for the 1:15AM incident and 3:30AM when you got up (presumably taking off your mask before you actually turned the machine off), your leaks look quite good.

In summary, it looks pretty good.

Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [CPAP] Sleep Report items massahnia 0 15 2 hours ago
Last Post: massahnia
  Progress report David44142 4 148 01-11-2017, 10:21 PM
Last Post: trish6hundred
  First night ever - First Nights Data Meredith410 49 1,526 01-07-2017, 09:26 AM
Last Post: Sleeprider
  ResScan Compliance Report BobF 2 200 12-22-2016, 10:55 AM
Last Post: BobF
  Resmed S9 Elite Last Nights Use 24hrs?? Cloner 6 236 12-14-2016, 09:40 PM
Last Post: zonk
  First SleepyHead report for S9 Autoset Lanco 41 1,984 11-27-2016, 05:11 AM
Last Post: Newbee2016
  What report from SleepyHead for FAA? gkainz 5 334 11-23-2016, 09:50 PM
Last Post: KSMatthew

Forum Jump:




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.