Little help needed

[Sleeprider]

SuperDot, the clinical menu for your machine is described here http://www.apneaboard.com/clinician-setu...gray-model

This is a link to the Setup Guide http://www.apneaboard.com/manuals51/REMs...pGuide.pdf

You need to go into the clinical menu and check the pressure setting and rate as you put into your last post. The "rate" is the backup rate for machine initiated breaths, and I think that is currently OFF on your machine. It needs to be on at 8. That is actually a pretty low backup rate, and after some experimentation, you might find a higher number is more comfortable.

If after reading the setup guide, the terms are still "Greek" you should arrange to take the machine to a professional for setup. It would be at most a nominal fee.

[PaulaO2]

I agree. The Testing Version 0.9.8-1 works better and is adequately tested at this point in time.

I sit partially corrected. While it works better and may work with some machines, it is more difficult for a new user to understand which one to download. The page alone is rather "Danger Will Robinson" looking and a new user may freak.

But good to know it does work with the A10.

[justMongo]

I sit partially corrected. While it works better and may work with some machines, it is more difficult for a new user to understand which one to download. The page alone is rather "Danger Will Robinson" looking and a new user may freak.

But good to know it does work with the A10.

WOW. You pulled that phrase out of Mr. Peabody's Wayback Machine.