Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
Machine and hose position
|
03-09-2021, 08:56 AM
Machine and hose position
I'm in the process of trying the Resmed Airfit F30 full face mask. I currently have my machine right next to my head so the hose comes down my torso and then back up to the mask. I'm think of moving my machine down a little bit to maybe next to my stomach area so there's less hose to get tangled in. For those with a full face mask where the hose attaches in the front, what have you found to be the best machine and hose position?
03-09-2021, 09:05 AM
RE: Machine and hose position
Fozzy, a good solution for the hose is to hang it from your headboard or wall (use a Command Hook). I use a lanyard like you would have for a work I.D. or conference name tag, and loop it around the tube leaving enough slack to reach the bed and allow movement. There are many CPAP tube hangers on the online market if you want something commercial.
Sleeprider
Apnea Board Moderator www.ApneaBoard.com ____________________________________________ Download OSCAR Software Soft Cervical Collar Optimizing Therapy Organize your OSCAR Charts Attaching Files Mask Primer How To Deal With Equipment Supplier INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
03-09-2021, 10:09 AM
RE: Machine and hose position
I went to the F30i. The tube is moved from the “nose” to the top ph the head gear. The hose is on a swivel and I never notice it. Air tubes come down both sides of the head to the mouth piece.
Works great for me but a couple of people here say the sound of the air bothers them but I honestly do not hear it.
Apnea (80-100%) 10 seconds, Hypopnea (50-80%) 10 seconds, Flow Limits (0-50%) not timed Cervical Collar - Dealing w DME - Chart Organizing
03-09-2021, 11:24 AM
RE: Machine and hose position
Yup, use a hose hanger / holder. Best thing I've done so far to increase the ease of use.
03-09-2021, 08:37 PM
RE: Machine and hose position
Thanks all. I currently have the hose coming over the headboard. I used the F30i for a few nights but don't get the best seal with that mask. It will start off fine but seems to leak when I slightly turn my head. That's why I'm trying the F30. That extra strap seems stabilize it more. I going to try the hose holder.
03-09-2021, 08:49 PM
RE: Machine and hose position
I have the machine lower than the bed, just off the floor, and run the hose vertically from there and tuck it under my pillow. The rest of the hose lies alongside my body, under the covers in the cooler months. Its still pretty warm at night here so no need for sheets. The hose therefore lies on the bed. I use a hose fleece to prevent rainout.
This setup works for me.
RE: Machine and hose position
My machine sits on top a file cabinet alongside our bed. The cabinet is about the same level / height as our top mattress.
The hose runs up to my hose hanger that sits atop our bed's headboard. It then drops straight down to my mask. I also use a fleece hose cover and it literally makes the hose dead silent, in regards to any movement.
03-10-2021, 09:46 AM
RE: Machine and hose position
Unit sits on my nightstand and the hose runs up and over the headboard to a hose hanger. I also use a 10 foot hose so I don't have to worry about knocking the unit off the nightstand. Another benefit of using a hose hanger is you can have the hose fixed and the hanger so if you tug, the resistance is at the hanger and not the unit.
Homer
Advisory Members serve as an "Advisory Committee" to help shape Apnea Board's rules & policies. Monitors are also Advisory Members, just with Extra Work assigned. Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.
03-10-2021, 11:26 AM
RE: Machine and hose position
I too just switched to the F30 FFM and worried about the same thing. My bed has a a bed post high enough to attach a shoe string to hold the tube up in the air at the corner of the bed. This seems to work fine for me. I never get tangled up in the hose. I think any thing that gets the hose up in the air as it enters the bed would work.
CPAP is a journey like “The Wizard of Oz”. It’s a long slow journey. You will face many problems and pick up many friends along the way. Just because you reach the poppies, it doesn’t mean you are in Kansas.
|
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Fixed Sleeping Position the entire night? | Unkikonki | 7 | 209 |
03-15-2024, 07:57 AM Last Post: G. Szabo |
|
adding sleep report (Wondering whether changing sleep position can "cure" apnea) | NewlyDiagnosed | 1 | 209 |
02-26-2024, 10:19 PM Last Post: BoxcarPete |
|
Wondering whether changing sleep position can "cure" apnea | NewlyDiagnosed | 8 | 403 |
02-26-2024, 05:08 PM Last Post: G. Szabo |
|
Hose volume | Willw | 4 | 236 |
02-26-2024, 04:53 PM Last Post: Willw |
|
[Treatment] POSAS (Position dependant OSAS) | A KLERK | 6 | 1,583 |
02-03-2024, 09:55 AM Last Post: BoxcarPete |
|
[Equipment] ResMed S9 Elite CPAP – Climate hose problem | drewb6111 | 2 | 232 |
01-28-2024, 08:24 PM Last Post: drewb6111 |
|
How often to replace mask, hose, etc. | bigla6940 | 6 | 582 |
12-30-2023, 07:00 AM Last Post: bigla6940 |