Thread Closed 
Macintosh user - can't import data to sleepyhead
Author Message
Sparrow Offline

New Members

Posts: 3
Joined: Nov 2012

Machine: Philips Respironics SysOne 560P APAP
Mask Type: Full face mask
Mask Make & Model: Resmed Mirage Quattro
Humidifier: Philips Respironics
CPAP Pressure: 11
CPAP Software: SleepyHead

Other Comments:

Sex: Female
Location:

Post: #1
Macintosh user - can't import data to sleepyhead
Hi there, folks. I'm new to the board. I saw a few posts about Sleepyhead, but I'm not sure I understand if they apply to my situation since I'm on a Macintosh. I appreciate your patience with me, and I'm sorry if I missed something.

I have MacOS 10.6.8 and I have a Respironics System One APAP. Sleepyhead was able to import my serial number for my machine (it's on the main screen) but I can't figure out how to import data.

I've tried selecting the root folder of the SD card, and then when that didn't work, I've selected every other folder on the SD card to see if I could pull the data in by trial-and-error.

I then copied data to a folder I created on my desktop. No luck!

Meanwhile, I wondered what happened to onkor.net -- it took me forever to get around to ordering a card reader.

And, when I got my CPAP, I think I paid for Encore Anywhere, but I guess that software was for my doctor and my Durable Medical Equipment provider. They never gave me a copy and they eventually took my modem away and replaced it with the SD card. I bet that left my doctor wondering why she wasn't getting data from me anymore. In any case, I'm glad to have the SD card if it allows me to access my data... but so far I seem to be out of luck.

Thanks in advance!!!
11-08-2012 11:29 AM
Find all posts by this user

Donate to Apnea Board
JJJ Offline

Advisory Members

Posts: 751
Joined: Apr 2012

Machine: ResMed S9 Autoset
Mask Type: Nasal mask
Mask Make & Model: Most recent: Wisp, Pilairo, Mirage Vista
Humidifier: ResMed S9 Autoset
CPAP Pressure: 17-20
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location: USA 97217

Post: #2
RE: Macintosh user - can't import data to sleepyhead
(11-08-2012 11:29 AM)Sparrow Wrote:  I have MacOS 10.6.8 and I have a Respironics System One APAP. Sleepyhead was able to import my serial number for my machine (it's on the main screen) but I can't figure out how to import data.

Is your CPAP a Series 60 machine? Look on the bottom (take the humidifier tank out first!) and look at the last numbers of the model number. If you see 460 or 560 it is a Series 60 machine and you will need a patch for SleepyHead before it will be able to read the data.
11-08-2012 11:43 AM
Find all posts by this user
dcgrafix Offline

Preferred Members-2

Posts: 203
Joined: Sep 2012

Machine: Philips Respironics System One RemStar Pro with C-Flex+ (461CA)
Mask Type: Full face mask
Mask Make & Model: ResMed Mirage Quattro Large
Humidifier: Respironics System one
CPAP Pressure: 8
CPAP Software: SleepyHead EncoreBasic Other Software

Other Comments: Diabetes type 2

Sex: Male
Location: BC Canada

Post: #3
RE: Macintosh user - can't import data to sleepyhead
(11-08-2012 11:29 AM)Sparrow Wrote:  I have MacOS 10.6.8 and I have a Respironics System One APAP. Sleepyhead was able to import my serial number for my machine (it's on the main screen) but I can't figure out how to import data.

Welcome to the forum Sparrow
Welcome

I use a PC so I am not familiar with the differences in the Mac version of sleepyhead but as JJJ said you will need the update if your Respironics SystemOne is a Series 60 machine.

This is the model label on my machine & the CA is for Canada so you can disregard it.
REMstar Pro (60 series) model #

Once you have your model number for your machine could you update your profile to reflect your model?

It could look like this.
Philips Respironics SystemOne APAP (Series 60) if that is the case.

It helps members to help you quicker.
11-08-2012 12:57 PM
Find all posts by this user

Donate to Apnea Board
Sparrow Offline

New Members

Posts: 3
Joined: Nov 2012

Machine: Philips Respironics SysOne 560P APAP
Mask Type: Full face mask
Mask Make & Model: Resmed Mirage Quattro
Humidifier: Philips Respironics
CPAP Pressure: 11
CPAP Software: SleepyHead

Other Comments:

Sex: Female
Location:

Post: #4
RE: Macintosh user - can't import data to sleepyhead
(11-08-2012 11:43 AM)JJJ Wrote:  Is your CPAP a Series 60 machine? Look on the bottom (take the humidifier tank out first!) and look at the last numbers of the model number. If you see 460 or 560 it is a Series 60 machine and you will need a patch for SleepyHead before it will be able to read the data.

Aha! Mine is a 560P model. I found a 9.2.2 build. Is that the patch I need? Thank you so much! Thanks
11-08-2012 01:58 PM
Find all posts by this user
dcgrafix Offline

Preferred Members-2

Posts: 203
Joined: Sep 2012

Machine: Philips Respironics System One RemStar Pro with C-Flex+ (461CA)
Mask Type: Full face mask
Mask Make & Model: ResMed Mirage Quattro Large
Humidifier: Respironics System one
CPAP Pressure: 8
CPAP Software: SleepyHead EncoreBasic Other Software

Other Comments: Diabetes type 2

Sex: Male
Location: BC Canada

Post: #5
RE: Macintosh user - can't import data to sleepyhead
(11-08-2012 01:58 PM)Sparrow Wrote:  
(11-08-2012 11:43 AM)JJJ Wrote:  Is your CPAP a Series 60 machine? Look on the bottom (take the humidifier tank out first!) and look at the last numbers of the model number. If you see 460 or 560 it is a Series 60 machine and you will need a patch for SleepyHead before it will be able to read the data.

Aha! Mine is a 560P model. I found a 9.2.2 build. Is that the patch I need? Thank you so much! Thanks

I am looking right now.
Yes looks like the newest for mac is
SleepyHead-0.9.2-2-beta-macosx-full.dmg 2012-02-03 24.1 MB

Hope this works for you but I am not a mac guy but I am sure there will be other members that will be able to help if needed.
11-08-2012 02:38 PM
Find all posts by this user

Donate to Apnea Board
Sparrow Offline

New Members

Posts: 3
Joined: Nov 2012

Machine: Philips Respironics SysOne 560P APAP
Mask Type: Full face mask
Mask Make & Model: Resmed Mirage Quattro
Humidifier: Philips Respironics
CPAP Pressure: 11
CPAP Software: SleepyHead

Other Comments:

Sex: Female
Location:

Post: #6
RE: Macintosh user - can't import data to sleepyhead
(11-08-2012 02:38 PM)dcgrafix Wrote:  I am looking right now.
Yes looks like the newest for mac is
SleepyHead-0.9.2-2-beta-macosx-full.dmg 2012-02-03 24.1 MB

Hope this works for you but I am not a mac guy but I am sure there will be other members that will be able to help if needed.

No luck. Looks like I have Ver. 0.9.2-2 (beta) installed, but it still can't import my data.
11-08-2012 02:41 PM
Find all posts by this user
Rritch Offline

Preferred Members-2

Posts: 107
Joined: Feb 2012

Machine: Respironics System One Pro (450)
Mask Type: Nasal mask
Mask Make & Model:
Humidifier: Respironics System One
CPAP Pressure: 10
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location: NoVA USA

Post: #7
RE: Macintosh user - can't import data to sleepyhead
(11-08-2012 02:41 PM)Sparrow Wrote:  
(11-08-2012 02:38 PM)dcgrafix Wrote:  I am looking right now.
Yes looks like the newest for mac is
SleepyHead-0.9.2-2-beta-macosx-full.dmg 2012-02-03 24.1 MB

Hope this works for you but I am not a mac guy but I am sure there will be other members that will be able to help if needed.

No luck. Looks like I have Ver. 0.9.2-2 (beta) installed, but it still can't import my data.

Here is the link to the patch for Mac OSX.

https://s3.amazonaws.com/thefreemanclan.net-publish/SleepyHead.dmg

And this should hopefully explain what to do with it

I downloaded the new .dmg file. I deleted the existing SH application from the Applications folder. I opened the new .dmg file and drug the new SH file to the Applications folder.

It appears to work without problems. The new SH version number is 0.9.2-3. Thank you for this patch.
(This post was last modified: 11-08-2012 03:12 PM by Rritch.)
11-08-2012 03:10 PM
Find all posts by this user

Donate to Apnea Board
trish6hundred Offline

Advisory Members

Posts: 6,630
Joined: May 2012

Machine: Resmed S9 AutoSet for Her
Mask Type: Full face mask
Mask Make & Model: Fisher & Paykel Simplus
Humidifier: H5i Heated Humidifier
CPAP Pressure: 10 - 7-20 Cm H2O
CPAP Software: Not using software

Other Comments: I started CPAP in 2008. Totally blind since birth.

Sex: Female
Location: Missouri, USA

Post: #8
RE: Macintosh user - can't import data to sleepyhead
Hi Sparrow and WELCOME! to the forum.!
I hope that last patch helps you to be able to use the "Sleepyhead"software.
I use a mack but when I tried to look at that particular software, it opened up for me in terminal and rather than mess up my whole system, I didn't look into it any further so I am unable to help you with it.
Best of luck.

trish6hundred
11-08-2012 04:18 PM
Find all posts by this user
dcgrafix Offline

Preferred Members-2

Posts: 203
Joined: Sep 2012

Machine: Philips Respironics System One RemStar Pro with C-Flex+ (461CA)
Mask Type: Full face mask
Mask Make & Model: ResMed Mirage Quattro Large
Humidifier: Respironics System one
CPAP Pressure: 8
CPAP Software: SleepyHead EncoreBasic Other Software

Other Comments: Diabetes type 2

Sex: Male
Location: BC Canada

Post: #9
RE: Macintosh user - can't import data to sleepyhead
Thanks Rritch for the patch for Mac OSX

Hope that works for you Sparrow
It is helpful to be able to use software to see how things are going with CPAP.
11-08-2012 11:54 PM
Find all posts by this user

Donate to Apnea Board
cubic302 Offline

New Members

Posts: 1
Joined: Mar 2013

Machine: System One RemStar Pro with C-Flex+ (460P)
Mask Type: Nasal pillows
Mask Make & Model: unsure
Humidifier: System One
CPAP Pressure: 4 ramp to 8
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location: South FL

Post: #10
RE: Macintosh user - can't import data to sleepyhead
Hi All.. Just wanted to say thank you to those of you who posted..

I am new to the forum and new to CPAP...I have a Macbook, and sleepyhead. I was not able to import any data, and read this forum.. Followed the direction and pulled the Sleepyhead update provided by the link.. IT WORKED!!!! I can not import and monitor my data.

Thank you.. !!! Will pay it forward.. Smile)
03-13-2013 09:05 PM
Find all posts by this user
Thread Closed 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Dreamstation Auto User Need Advice Etchris 10 391 Yesterday 10:07 AM
Last Post: Sleeprider
Sad [CPAP] New User needs help please RRussell 20 302 01-15-2017 08:51 PM
Last Post: trish6hundred
  I'm an overwelmed New APAP User, Help! RWhipkey 4 224 01-11-2017 10:26 PM
Last Post: trish6hundred
  Why does Sleepyhead data not match my machine's data? Ihaveapnea 8 348 01-06-2017 06:19 PM
Last Post: Ihaveapnea
  New Member: New User, Which Machine? Totally confused Spunky8 10 369 01-04-2017 09:26 PM
Last Post: trish6hundred
  Interpreting Sleepyhead data sleepytimegal 8 291 01-03-2017 10:15 AM
Last Post: Sleeprider
  Airsense 10 Autoset - New User C0mbe 13 619 12-23-2016 09:10 AM
Last Post: Sleeprider

Forum Jump:

Who's Online (Complete List)