Hello Guest,Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
Mix Masks and Machines
12-06-2013, 03:40 AM
Are masks interchangable on different machines from different manufacturers? e.g. Philips Wisp on ResMed. Some machines can select the type of masks such as full, nasal & pillow as well as hose sizes. Some suppliers say yes, some say no & some say may be. There are only 15 & 22 mm hose and they seem to at least interconnect properly. Any comments?
12-06-2013, 03:58 AM
I think that as long as the hose fits -- you can use any combination. You may find another mask by another manufacturer that will work better.
12-06-2013, 04:53 AM
Mask setting for system one control
S9 mask settings
PRS1 setting for non Resproncis mask is "0"
The S9 automatically set the hose type whenever climatelne is connected otherwise you must set hose type if using slimline hose 15mm (not the climateline) or standard hose 22mm
|Possibly Related Threads...|
|DME and accepting machines.||jokinawa||8||225||
02-13-2017, 09:19 AM
Last Post: jerrydaw
|New Resmed AirFit F20, & N20 Masks||gjw||38||7,692||
01-29-2017, 06:44 PM
Last Post: PaytonA
|Cpap masks can worsen existing dental issues according to their manuals, apparently||Ihaveapnea||5||322||
01-05-2017, 07:12 PM
Last Post: Ihaveapnea
|3-D printed masks||Mark Douglas||6||284||
01-05-2017, 05:45 PM
Last Post: Mark Douglas
|Newbie so confused between 2 machines||Matzaball2016||23||1,470||
12-24-2016, 09:57 PM
Last Post: Adoniscmj
12-04-2016, 05:11 AM
Last Post: kwhenrykerr
|[News] CUSTOM 3-D PRINTED MASKS||srlevine1||2||416||
11-17-2016, 10:29 PM
Last Post: Galactus