Hello Guest,
Welcome to Apnea Board !
/
Mix Masks and Machines
|
Mix Masks and Machines
|
apdtap
Posts: 13 Threads: 4 Joined: Dec 2013
Machine: Philips & ResMed
12-06-2013, 03:40 AM
Mix Masks and Machines
Are masks interchangable on different machines from different manufacturers? e.g. Philips Wisp on ResMed. Some machines can select the type of masks such as full, nasal & pillow as well as hose sizes. Some suppliers say yes, some say no & some say may be. There are only 15 & 22 mm hose and they seem to at least interconnect properly. Any comments?
MarkSchubart
Posts: 5 Threads: 0 Joined: Dec 2013
Machine: Remstar auto
12-06-2013, 03:58 AM
RE: Mix Masks and Machines
I think that as long as the hose fits -- you can use any combination. You may find another mask by another manufacturer that will work better.
zonk
Posts: 8,023 Threads: 243 Joined: Feb 2012
Machine: A10 AutoSet
12-06-2013, 04:53 AM
RE: Mix Masks and Machines
![[Image: MaskSettingsforSystemOneResistanceC.jpg]](http://z5.ifrm.com/5902/67/0/p1031700/MaskSettingsforSystemOneResistanceC.jpg) Mask setting for system one control http://www.healthcare.philips.com/pwc_hc...ontrol.pdf S9 mask settings http://www.resmed.com/assets/documents/s...sa_eng.pdf PRS1 setting for non Resproncis mask is "0" The S9 automatically set the hose type whenever climatelne is connected otherwise you must set hose type if using slimline hose 15mm (not the climateline) or standard hose 22mm
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Hybrid Masks more comfortable than over the nose FF mask? | sleepingbetterinFl | 1 | 54 |
11 hours ago Last Post: UnicornRider |
|
| [Equipment] Any tips on how to get better airflow in under nose masks/hybrid full face masks? | jake79 | 12 | 191 |
Yesterday, 05:19 PM Last Post: jake79 |
|
| Skin Irritation from Masks | Granny7 | 19 | 2,735 |
04-13-2024, 04:38 AM Last Post: Little Olive |
|
|
Are there alternative straps out there for masks that does not slide off? | hejohoo | 5 | 517 |
04-03-2024, 03:09 PM Last Post: hejohoo |
| csa machines | cexer | 1 | 131 |
03-20-2024, 01:43 PM Last Post: cexer |
|
| Custom-Fitted Masks? | TonyBoBony | 5 | 444 |
03-01-2024, 10:30 PM Last Post: TonyBoBony |
|
| Returning defective machines to Philips Respironics | big_dave | 5 | 873 |
02-04-2024, 02:15 PM Last Post: big_dave |
|
/
Mix Masks and Machines
