Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Monitoring data wirelessly
#21
RE: Monitoring data wirelessly
(10-13-2020, 12:33 AM)Jeff8356 Wrote: Your ISP has the whole range selected.  No big deal, we can change that.

In the IPv4 section you can change the "DHCP Ending Address" to 245 and click Save.  Please enter a value less than or equal to 253.

Dont change anything else.  You may need to reboot the router/modem to make sure it changes.  Which means you will get knocked offline for a minute or two.  Wouldn't be a bad idea to reboot your computers/devices also.

Next yoou will need to edit the Flashair config file.  I will use your info below:

Code:
[WLANSD]

DHCP_Enabled=NO
IP_Address=192.168.0.250
Subnet_Mask=255.255.255.0        
Default_Gateway=192.168.0.1
Preferred_DNS_Server=192.168.0.1

[VENDOR]

VERSION=FA9CAW3AW3.00.01
CID=02544d535731364740d231dd79010a01
PRODUCT=FlashAir
APPSSID=NETGEAR5309
APPNETWORKKEY=**************
APPNAME=FlashAir
APPMODE=5
APPAUTOTIME=0
DNSMODE=1
UPLOAD=1
NOISE_CANCEL=2
LOCK=1
WEBDAV=1
TIMEZONE=-16

You will need to type in your wifi password next to "APPNETWORKKEY=" anytime you edit the config file.  Delete the line of asterisk and add you password, you should see it in plain text.

After the config file is saved, eject the SD card properly (don't just yank it out).

Then put the FlashAir into your CPAP machine and give it a minute or two.

Open your File Manager and click "Map Network Drive" then enter the info below:
     

And hopefully you will have a connection between you computer and the Flashair in your CPAP machine.

We can go into transferring files after we make sure this works first.....
It will not let me increase DHCP Ending Address:
"Please enter a value less than or equal to 253."
Post Reply Post Reply






Donate to Apnea Board  
#22
RE: Monitoring data wirelessly
Jeff is suggesting setting the ending address to 245. It should allow you to do that.
The current version of OSCAR is 1.2.0.  We recommend upgrading from any earlier version.

Useful links
Download OSCAR
Best way to organize charts
How to attach charts to your post

Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.
Post Reply Post Reply
#23
RE: Monitoring data wirelessly
(10-13-2020, 01:45 AM)GuyScharf Wrote: Jeff is suggesting setting the ending address to 245.  It should allow you to do that.

My bad, thought it said 254. Done.

The OSCAR version installed in 1.1.1.

Question: Do I need to add the top part to the config?:

Code:
[WLANSD]

DHCP_Enabled=NO
IP_Address=192.168.0.250
Subnet_Mask=255.255.255.0        
Default_Gateway=192.168.0.1
Preferred_DNS_Server=192.168.0.1

This was not in it before.
Post Reply Post Reply
#24
RE: Monitoring data wirelessly
Yes, add everything that Jeff8356 listed. After you follow his instructions, you should be able to see your FlashAir using your web browser. In the URL bar, type "192.168.0.250" and press <ENTER>.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Beginner's Guide to Sleepyhead and OSCAR
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply






Donate to Apnea Board  
#25
RE: Monitoring data wirelessly
(10-13-2020, 06:56 AM)Crimson Nape Wrote: Yes, add everything that Jeff8356 listed.   After you follow his instructions, you should be able to see your FlashAir using your web browser.  In the URL bar, type "192.168.0.250" and press <ENTER>.

Nothing coming up when I type in that, just hangs. Something amiss? Did I need to download some FlashAir software maybe?
Post Reply Post Reply
#26
RE: Monitoring data wirelessly
(10-06-2020, 02:35 AM)MCS2014 Wrote: Thanks. Just got my new card in.

Exactly which card did you get, and what is its capacity?
The current version of OSCAR is 1.2.0.  We recommend upgrading from any earlier version.

Useful links
Download OSCAR
Best way to organize charts
How to attach charts to your post

Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.
Post Reply Post Reply
#27
RE: Monitoring data wirelessly
Try http://192.168.0.250 in your browser address bar

It may be defaulting to "https://" instead

The FlashAir software should only be needed if you need to re-initialize the card (set it back to factory defaults) or to update the firmware.

Which version is your FlashAir card? If you got it recently it should be W-04, if it's older it might be a W-03. It should say on the front of the card.
Using a 13" MacBook Air (2017), MacOS Catalina (10.15.7), OSCAR v1.2.0
In a VM: Win10 1909 (18363.836)

Installing OSCAR on a Mac
Organizing your OSCAR charts
Attaching images and files for the forum
OSCAR Help
OSCAR Data Interpretation
Post Reply Post Reply






Donate to Apnea Board  
#28
RE: Monitoring data wirelessly
(10-13-2020, 02:58 PM)GuyScharf Wrote:
(10-06-2020, 02:35 AM)MCS2014 Wrote: Thanks. Just got my new card in.

Exactly which card did you get, and what is its capacity?
Exactly the one stated in the instructions:
Toshiba FlashAir III W03 16GB Wireless SD Memory Card  (PFW016U-1CCW)
Post Reply Post Reply
#29
RE: Monitoring data wirelessly
(10-13-2020, 03:00 PM)Jeff8356 Wrote: Try http://192.168.0.250 in your browser address bar

It may be defaulting to "https://" instead

The FlashAir software should only be needed if you need to re-initialize the card (set it back to factory defaults) or to update the firmware.

Which version is your FlashAir card?  If you got it recently it should be W-04, if it's older it might be a W-03.  It should say on the front of the card.

Still just hangs when I type it in. Then this comes up: "The connection has timed out

The server at 192.168.0.250 is taking too long to respond."

Version is W-03. Bought on Amazon last week: [Commercial Link Removed] Search Amazon for: Toshiba-Flash-Wireless-Memory-PFW016U-1CCW/dp/B00UOYPZNE

I think I need to re-initialize when I keep removing the card from the machine (I'm still using the standard card until for my manual readings until I get this new one to work) ?


-----
Moderator Action: Commercial Link Removed
To maintain our status as an educational organization, the only commercial links allowed in this forum are to CPAP-related manufacturer websites. This is stated in the Apnea Board Rules with details given in the Commercial Links Policy section.
-----
Post Reply Post Reply
#30
RE: Monitoring data wirelessly
You should be able to mount it in your computer's SD slot and it will connect to the network.  It doesn't have to be in your CPAP to work.  You can try this; Insert the SD card in your Mac. Open a terminal window, type: ping -c3 192.168.0.250  If it is connected to your network it should answer.  Since I'm not a Mac user, Jeff will need to confirm the proper syntax for a Mac, but try arp -a in the window as well.  This should list the devices connected to your network.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Beginner's Guide to Sleepyhead and OSCAR
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply






Donate to Apnea Board  


Possibly Related Threads...
Thread Author Replies Views Last Post
  OSCAR [unable to import data after original migration of SH data] OpalRose 23 2,031 06-02-2019, 02:17 PM
Last Post: OpalRose
  How to delete data points in Oximeter data DBBCPAP 3 816 12-19-2018, 06:43 PM
Last Post: DBBCPAP
  Sleepyhead Needs YOUR data! [data collection complete] palerider 35 6,098 04-02-2016, 02:28 PM
Last Post: palerider


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.