Has anyone had this problem before? Please help!
Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
Motherboard Problem
|
11-15-2014, 11:02 AM
Motherboard Problem
Last night the oxygen flow controls on my Simply Go Concentrator stopped working. I need the flow to be at level 2 but the machine is stuck at 3.5. The flow mode button works at level 2 but only 5 minutes at a time, at which point an alarm (showing that something is wrong) goes off and the system proceeds to shut itself down. I've tried troubleshooting, unplugging the concentrator from the electricity source and plugging it back it, but to no avail.
Has anyone had this problem before? Please help!
11-15-2014, 02:04 PM
RE: Motherboard Problem
Hi Jim46,
WELCOME! to the forum.! I don't know anything about concintrators, You might try to call the place where you got it and tell them about your situation. Hang in there for more suggestions and hopeflly, you can get this straightened out.
trish6hundred
11-15-2014, 02:55 PM
RE: Motherboard Problem
I'm not familiar with your unit so I looked up setup guides for on the internet. The documentation showed a built-in battery backup. You didn't mention this in your initial post. I would try removing all power sources, battery included, for a period of 30 minutes. Most units made today run the power through capacitors to even out the power flow. The capacitors will remain charged for awhile after the power is removed. That's why you need to wait a few minutes. Hopefully, this will reset the unit back to factory defaults. Please keep us posted.
Crimson Nape
Apnea Board Moderator www.ApneaBoard.com ___________________________________ Useful Links -or- When All Else Fails: The Guide to Understanding OSCAR OSCAR Chart Organization Attaching Images and Files on Apnea Board Apnea Helpful Tips INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
|
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
AirFit F30i Mask Problem | OldTeacher | 22 | 4,583 |
03-23-2024, 03:23 PM Last Post: ButtonNoseBarbie |
|
[CPAP] ResMed Air Sense 10 Auto Off Problem | Buddie43 | 19 | 26,352 |
03-05-2024, 10:50 PM Last Post: Ailyhsaun |
|
Are these flow limits my problem? | k888 | 87 | 5,475 |
02-26-2024, 12:02 PM Last Post: k888 |
|
[Treatment] Are leaks the problem or do I need BIPAP? | TiredDude | 3 | 333 |
02-22-2024, 07:52 PM Last Post: Sleeprider |
|
[CPAP] Is my leak rate a problem? | Kevstuf | 5 | 552 |
02-08-2024, 10:25 AM Last Post: Kevstuf |
|
If nasal congestion is a problem, will this show in my AHI? | canigetawitness1992 | 4 | 393 |
01-29-2024, 09:20 PM Last Post: RNeil |
|
[Equipment] ResMed S9 Elite CPAP – Climate hose problem | drewb6111 | 2 | 230 |
01-28-2024, 08:24 PM Last Post: drewb6111 |