RE: Nasal mask filling with some water and causing popping noise
CB91...
you will not get an auto option unless you are using the climateline hose
Ticman,
Unless I missed it, you did not mention what your settings "last night".
RE: Nasal mask filling with some water and causing popping noise
Last night I used auto and 81 temp. I also had hose over headboard but just water in nose cushion
Tonight I am going to manual 4 and 80 temp and see what happens.
From all I read it's trial and error with humidity, hose temp, and room temp.
RE: Nasal mask filling with some water and causing popping noise
Same situation for me last night.
Disconnect hose and hold it vertical, shake it to get out moisture accumulation.
Once I cleared the hose I was back to normal.
Consider keeping most of the hose lower than the face mask. I had put the hose over the headboard, and having hose above mask may
have caused the accumulation of moisture.
Let me know how you do !
BK
RE: Nasal mask filling with some water and causing popping noise
Improved success last night
Humidity at 4; temp at 80 and hose hanging down from machine rather than over headboard
Slept 8 1/4 hours with no waking
small amount of water in nose cushion but nothing that obviously woke me up during the night. No noticeable issues with nose from reduced humidity.
tonight I may try and go to humidity level 3 and see what happens.
to all that have offered suggestions and support.
BK good luck to you. PM me if you want more information.
Mike
