Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Need help Aircurve 10 AutoASV Settings/Insights
#1
Need help Aircurve 10 AutoASV Settings/Insights
               
Hi

Almost a year ago i posted here first time regarding having issues with my CPAP. I had some Home tests afterwards with the hospital where they noticed a lot of Central Apneas, and then supplied me with a Resmed Aircurve 10.

Since i've got the Aircurve my sleep and energy levels have increased, my focus etc. 

But lately i felt like my sleeping nights are not as consistent as before, and i dont know why.

I'm fighting a bit against my airfit 20 mask since it vibrates sometimes at night, and i assume its leaks, but it holds better to me than my older dreamwear full face.

I have some Oscar charts attached from 2 different nights. Sometimes i hit below 1 in AHI and sometimes i can go all the way to 4, and i would like to try consistently to get below 1 or around.

I can still wake up feeling tired and exhausted. I'm fairly active workout 5-6 times week and maintain healthy sleeping habits with dark room and good temperature.


Attached Files Thumbnail(s)
   
Post Reply Post Reply






Donate to Apnea Board  
#2
RE: Need help Aircurve 10 AutoASV Settings/Insights
Clusters of UA appear to be positional. I'm not in a position to judge your minimum PS setting, but would like to know how you arrived at that as an optimum minimum. It seems to work, but may increase the number of central events that the ASV has to use more pressure support to address. I really think the most important reason your results are not as consistent is because of something that has changed your tendency for chin-tucking or similar airway restriction. Changed pillows?
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: Need help Aircurve 10 AutoASV Settings/Insights
Hi sleeprider

Thanks for replying, ive seen some of your advice to other People using asvauto etc with great succes.

I made a old post regarding if I had positional apneas, where i tried 4 different collars, 6 different pillows and heights, thickness etc.

Right know im not quite sure about my settings since theyre set from the sleep clinic at my hospital, and its been really hard for Them to understand that im tired since my ahi was 22 before the aircurve.

I dont know if these UAs are from me unintentionally holding my breath. My gf have recordings of me making almost like squeeking sounds while sleeping.

Let me know what info you would need to try help me further, as im really desperate.
Post Reply Post Reply
#4
RE: Need help Aircurve 10 AutoASV Settings/Insights
Jarlo, back-off the PS min to 3.0 and give it a try. I have no problems trying higher PS, but I'd like to see you progress and compare.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply






Donate to Apnea Board  
#5
RE: Need help Aircurve 10 AutoASV Settings/Insights
HI Again

I have now collected data with a PS min on 3 from last night. My AHI seems a bit higher with this setting, but i feel that same either way.

IS there anything else can we try to do after seeing this?


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#6
RE: Need help Aircurve 10 AutoASV Settings/Insights
In addition to changing your PS min, your EPAP min was reduced from 7.0 to 4.0. Lets try with a high minimum EPAP.
EPAP min 7.0
EPAP max 12.0
PS min 3.0
PS max 12.0

I think these settings will be more comfortable as you really don't need more PS, and all the unresolved events are obstructive. I'm pretty sure there is a positional component at work here. You do apparently need the higher EPAP. I think we should look at another night of data before moving PS min up to 4.0.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  KeepSmiling’s Book 2, ResMed AirCurve 10 VAuto Adventure/Treatment KeepSmiling 40 1,056 11 hours ago
Last Post: KeepSmiling
  Clear Airway Apneas TOO HIGH. ResMed AirCurve 10 Amitaba 29 1,027 11-22-2022, 11:11 PM
Last Post: Sleeprider
  AirCurve 10 - Where does leftover part go? markc1117 4 210 11-19-2022, 01:46 PM
Last Post: markc1117
  AirCurve 10 ASV settings - Equivalent settings for AirCurve 10 VAUTO Shadowpup 0 131 11-18-2022, 05:04 PM
Last Post: Shadowpup
  Does Slimline vs Standard vs 3m Tubing Affect AirCurve 10 Response Time? KeepSmiling 2 159 11-15-2022, 01:40 PM
Last Post: KeepSmiling
  AirCurve 10 - AutoStart? SleepyTimeTime 7 246 11-14-2022, 06:10 PM
Last Post: KeepSmiling
  [CPAP] My New ResMed AirCurve 10 VAUTO Sleepster 7 329 11-09-2022, 08:46 PM
Last Post: Sleepster


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.