Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Need help - nothing seems to work
#1
Need help - nothing seems to work
Hello,

My prescription from my sleep doctor still has me waking up feeling and looking terrible. I’ve had my ResMed Aircurve 10 for the last 6 months. I bought it to replace my Phillips machine from the foam issue. The settings that were recommended to me by my doctor are the following:

AutoASV
Min EPAP 5
Max EPAP 15
Min PS 0
Max PS 15

I’ve since switched it to the following. 

AutoASV
Min EPAP 7
Max EPAP 15
Max PS 4
Max PS 15

What software do I need to be downloading to take a look under the hood with the SD card? The machine claims I have 0 AHI but like I mentioned, I still wake up feeling terrible and looking like I hadn’t slept. No matter what settings I switch it to, nothing seems to work. I’m at my wits end. My mask is an F30 with a heated tube and humidifier. Any recommendations would be very much appreciated.
Post Reply Post Reply
#2
RE: Need help - nothing seems to work
I'm assuming you have a resmend machine. You want free OSCAR software from the link at the top of this page. You can post your daily data here. See the links below for instruction.
Download OSCAR

Organize Charts
Attaching Charts

Mask Primer
Soft Cervical Collar

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.

Post Reply Post Reply
#3
RE: Need help - nothing seems to work
It will not allow me to upload the pdf from Oscar. Any tips as to why? It definitely is within the sizing limits.
Post Reply Post Reply
#4
RE: Need help - nothing seems to work
We really prefer to see the screenshot vs the PDF
Post Reply Post Reply
#5
RE: Need help - nothing seems to work
Hopefully this works


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#6
RE: Need help - nothing seems to work
First step is to reduce your leaks.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Tech Nerds-think this battery setup will work for Transcend Micro? johnbrain 7 111 Yesterday, 10:29 AM
Last Post: johnbrain
  Lowenstein Prisma 20A - how can I work out energy usage for camping? JamesD0079 4 628 02-15-2024, 04:16 PM
Last Post: JamesD0079
  Finally found through DISE why cpap/bipap/ASV was never going to work for me. logart89 9 1,376 08-01-2023, 09:36 AM
Last Post: logart89
  Travel PAP machines - heat/moisture exchange units - do they work? Bostonsnow 1 753 06-10-2023, 06:34 AM
Last Post: cate1898
  RESMED S9 Smart Stop does not work Taxifahrt 20 13,326 05-14-2023, 02:34 AM
Last Post: Patt1
  High AHI, Extreme Fatigue, Cannot get CPAP or BiPap to work exchanged 2 600 04-28-2023, 06:38 PM
Last Post: exchanged
  [Diagnosis] Can Cpap "work" but still be useless in treating symptoms? tom41 13 1,088 04-25-2023, 11:29 AM
Last Post: Sleeprider


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.