Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account

New Posts   Today's Posts

Need help setting pressure
RE: Need help setting pressure
just learned how to set pressure on my
resmed autoset h5i s9 series
positive airway pressure device
with humidifier
nasal mask

originally setting it at 12 was like waterboarding, then ROTECH
changed it to 16 doc told em 14. There were no instructions in
tech manual. I found a video on line showing me how to set pressure
and check for leaks and AHI (apneas per hour)

go to utube and see if there is a video or check your manual.
Post Reply Post Reply

Donate to Apnea Board  
RE: Need help setting pressure
(08-17-2016, 04:39 PM)jen61 Wrote: Ok I tried to set it and can't get it to do anything. I pushed the round button on the front along with the ramp button for more than 5 seconds and nothing happened.(I tried several times)... Is there something else I'm not doing right?

It took me some playing with the round button after what you have done. It was not very fun. It will keep switching menus when you rotate the knob. Look for the arrows that point up or down and follow them to even more settings. Try not to give up, you will find the pressure settings.


Post Reply Post Reply
RE: Need help setting pressure
I finally got it to work. (had to unplug, then plug machine back in). I have my settings at minimum 12, maximum 18 with a ramp setting of 9. It shouldn't be a problem because my machine has been starting at 9 for awhile now, and I haven't had to ramp it down to get to sleep. We'll see how it goes!
Post Reply Post Reply
RE: Need help setting pressure
Good Work Jen Sleep-well

Post Reply Post Reply

Donate to Apnea Board  
RE: Need help setting pressure
Turn knob to highlight setup.
Now push knob and ramp 5 seconds or until it beeps.

Turn knob to highlight setup again and push knob.
Use knob to scroll.thru the menu.
highlight what menu item you want press knob to enter that item.turn knob to change settings.
Press knob to exit that item
When done scroll to exit and push knob,
Post Reply Post Reply

Possibly Related Threads...
Thread Author Replies Views Last Post
  Setting time and date on Resmed Airsense 10 cmadon 27 14,426 07-07-2019, 01:14 PM
Last Post: sheepless
  What does the 'EPR Inhale' setting do? StevesSp 6 232 07-06-2019, 04:57 PM
Last Post: StevesSp
Question How to change the Expiratory Pressure Relief setting on a Phillips Dream Station. R Dillinger 8 373 07-05-2019, 12:47 AM
Last Post: Hydrangea
  [CPAP] Comfort Setting for NO FLEX?? O2ZZZZ 9 372 07-03-2019, 12:55 AM
Last Post: Hydrangea
  How far can I go with Clinical setting changes? Donna 7 359 06-02-2019, 09:28 PM
Last Post: Sleepster
  APAP capped out it's set pressure setting Diotima245 1 191 05-31-2019, 08:29 AM
Last Post: Sleeprider
  N30i [what mask setting] Airsense 10 AutoSet Topdogg7505 3 237 05-23-2019, 10:34 PM
Last Post: Topdogg7505

New Posts   Today's Posts

About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.