Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Need help understanding setup of a REMstar Auto M Series with A-Flex
#1
Need help understanding setup of a REMstar Auto M Series with A-Flex
I'm new to your forum. Wish I'd found you guys, years ago.... I have been having problems with sleep and my CPAP machine for years. I could go on and on with changes to my mask, machine, but never have found the right combination to give me a good night sleep. I know it's possible because in Oct. 2010, I had a sleep study done. I woke up feeling great, but I never have been able to repeat the night's rest I got during that sleep study...and I know it wasn't the "sleep number bed" that thay had.:grin:

Now I'm begging for information, can anyone tell me what the difference is between "C-Flex" and "A-Flex" in the "Comfort Type" setup window, of my REMstar Auto M Series with A-Flex? Related to these setting, there is a selection in the "A-Flex Setting" window of 1, 2, or 3. Can someone explain?

Thanks for whatever help you can provide.
Post Reply Post Reply



Donate to Apnea Board  
#2
RE: Need help understanding setup of a REMstar Auto M Series with A-Flex
Hi mlpoland,
WELCOME! to the forum.!
Hang in there and someone will be able to help you soon.
Best of luck to you.
trish6hundred
Post Reply Post Reply
#3
RE: Need help understanding setup of a REMstar Auto M Series with A-Flex
Hi mlpoland, welcome to apnea board
I don,t use your machine but just looked at the manual
(you can download the manual from here, section two ... http://www.apneaboard.com/adjust-cpap-pr...tup-manual )
A-Flex (auto-CPAP) and C-Flex (auto-CPAP and CPAP) are comfort features, provide pressure relief at the beginning of exhalation
Here explained in details http://aflex.respironics.com/

It wont hurt set the machine on Auto so the machine adjust pressure level to your needs, it,ll gives you some idea if pressure need some adjustment or leave on Auto if works better for you. Whats the AHI?
Post Reply Post Reply
#4
RE: Need help understanding setup of a REMstar Auto M Series with A-Flex
Zonk, thanks for the link. It cleared up some of my misunderstanding. With a little luck, maybe I'll be able to get a good night sleep, and be less of a grump during the day.Big Grin


Post Reply Post Reply



Donate to Apnea Board  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Death throes for my Remstar Auto A-Flex machine?? mainemandean 15 304 11-16-2018, 12:17 PM
Last Post: Sleeprider
  [Equipment] Philips Respironics System One REMstar Auto A-Flex: Humidification Problem 93celicaconv 3 168 11-04-2018, 12:47 PM
Last Post: Sleeprider
  HumidX with AirMini F20 Setup Kit mcguirejohnr 3 205 10-17-2018, 12:47 PM
Last Post: Stom
Gross REMStar Auto RESET DATA SCREEN Not Shown Wizard99 9 245 10-17-2018, 12:05 PM
Last Post: jaswilliams
  Turning off Flex on Dreamstation Jimronbob 6 422 10-11-2018, 12:37 AM
Last Post: thibaulthib
  understanding device downloads presentation sheepless 0 140 10-01-2018, 05:00 PM
Last Post: sheepless
  RERA [help understanding them] Shel 30 939 09-28-2018, 10:30 AM
Last Post: Walla Walla


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.