Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
New BiPap machine
|
04-28-2015, 12:17 PM
New BiPap machine
Well as stated from last week I had my new titration study done last night and with the new BiPap I have new pressures. Went home with new machine this morning. I must say a lot of the others were right, that is definitely different breathing as compared to the cpap. But I took to it well, albeit it took me about 45 minutes to fall asleep with this new breathing patten going on, but I slept all night and let the technicians do their thing. We'll see how all this goes but so far so good
04-28-2015, 12:56 PM
RE: New BiPap machine
Hi brianwood619,
Great to hear that your titration went well, CONGRATULATIONS! on the new S9VPAP Auto. Much success to you in getting used to your new machine.
trish6hundred
04-28-2015, 01:29 PM
RE: New BiPap machine
Congrats! Hang in there and tell the rest of us how it goes. Some forum folks may also be eventually on that, so sharing your experience is helpful to the rest of us too!
04-28-2015, 10:18 PM
RE: New BiPap machine
What pressure settings did they recommend? I presume you got a range of pressure and a pressure support (IPAP/EPAP differential).
Sleeprider
Apnea Board Moderator www.ApneaBoard.com ____________________________________________ Download OSCAR Software Soft Cervical Collar Optimizing Therapy Organize your OSCAR Charts Attaching Files Mask Primer How To Deal With Equipment Supplier INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
04-29-2015, 01:52 AM
RE: New BiPap machine
I got into the clinician menu for the first time tonight and all I know is I have no idea what all these settings are until I read up on it, but here's what it's set for now.
Mode: VAuto Max Ipap: 25.0 Min Epap: 8.0 PS: 9.0 Ti Max: 2.4 Ti Min: 0.3 Trigger: Med Cycle: Medium I know this thing has more settings on it than my straight cpap did so I definitely need to put my nose in he books and make sense out of all of it. Wife did say last night I did not snore so evidently this is what I needed.
04-29-2015, 07:41 AM
(This post was last modified: 04-29-2015, 07:44 AM by Mark Douglas.)
RE: New BiPap machine
Bilevel cpap is touted to increase compliance. If that be the case why wouldn't every cpap user want one? This concept is what prompted me to acquire such a machine out of the gate. If I find it causes complications due to markedly improved respiration it can be dumbed down until my body adjusts.
I will be looking forward to following in your wake. Edited cause I slept really poorly and can't think yet this AM.
I use my PAP machine nightly and I feel great!
Updated: Philips Respironics System One (60 Series) RemStar BiPAP Auto with Bi-FlexModel 760P - Rise Time x3 Fixed Bi-Level EPAP 9.0 IPAP 11.5 (cmH2O)
04-29-2015, 08:03 AM
RE: New BiPap machine
I think the main reason i took to it quickly was where I've been sleeping with a mask on every night for the last four years. Monday night during my titration study it was a bit weird to get used to with the vast difference between inspiration and expiration but all my vital signs were great throughout the night, and they said I spent even more time in rem sleep than I did with just straight cpap.
04-29-2015, 08:07 AM
RE: New BiPap machine
That is really encouraging.
If I dream at all I rarely remember
I use my PAP machine nightly and I feel great!
Updated: Philips Respironics System One (60 Series) RemStar BiPAP Auto with Bi-FlexModel 760P - Rise Time x3 Fixed Bi-Level EPAP 9.0 IPAP 11.5 (cmH2O)
04-29-2015, 08:37 AM
RE: New BiPap machine
(04-29-2015, 01:52 AM)brianwood619 Wrote: I got into the clinician menu for the first time tonight and all I know is I have no idea what all these settings are until I read up on it, but here's what it's set for now. You are setup with an exhale pressure of 8.0 and IPAP of 17.0...pretty impressive pressure support. The machine is setup to automatically increase pressure if needed all the way to 14/25 (PS is constant at 9.0). The VPAP auto always maintains the same pressure support unlike the PRS1 760 which can vary both EPAP and IPAP within a range of pressure support. You don't want to mess with those timing numbers. Good luck, keep us posted how that works out.
Sleeprider
Apnea Board Moderator www.ApneaBoard.com ____________________________________________ Download OSCAR Software Soft Cervical Collar Optimizing Therapy Organize your OSCAR Charts Attaching Files Mask Primer How To Deal With Equipment Supplier INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT. |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Which biPAP? | HalfAsleep | 9 | 259 |
03-14-2024, 09:04 AM Last Post: HalfAsleep |
|
bipap | Innisfree | 2 | 424 |
12-12-2023, 07:00 PM Last Post: UnicornRider |
|
CPAP Machine Choices - read this before you accept a new machine | SuperSleeper | 283 | 262,212 |
11-10-2023, 10:24 AM Last Post: robbob2112 |
|
Got Bipap instead of prescribed ResMed Autoset machine. Please help me get going. | marvin2023 | 2 | 552 |
10-10-2023, 07:26 PM Last Post: marvin2023 |
|
[Treatment] Need help/advise after changing BiPAP Machine | dnar82 | 6 | 715 |
09-29-2023, 06:59 AM Last Post: Crimson Nape |
|
Can I use Bipap Machine for Cpap | Julia63 | 8 | 691 |
09-21-2023, 08:46 AM Last Post: Sleeprider |
|
Help with bipap | Al N | 7 | 697 |
09-14-2023, 06:15 PM Last Post: Al N |