this is a great forum.
Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
New System One 760p Software Question
|
05-11-2013, 04:01 PM
New System One 760p Software Question
New to Bipap therapy. Havew System One 760 p with heated humidifier. I would like to track my results, but not sure which software I need. I have win 8, and have had no luck so far in my attempts to get sleepyhead to work. Does it not work on win 8. Also what is the appropriate software and how do or where can I get it. If I have to load win 7 or do Linux on another box, I can do that too.
this is a great forum.
05-11-2013, 04:10 PM
RE: New System One 760p Software Question
Hi raschuyler and welcome
Have you installed the patch You need to install the patch for 60 series machines as noted here (you need to be logged in to see the link) http://www.apneaboard.com/forums/Thread-...e-software
05-11-2013, 04:33 PM
RE: New System One 760p Software Question
Hi raschuyler,
WELCOME! to the forum.! Hang in there for more responses to your post and best of luck.
trish6hundred
05-11-2013, 04:56 PM
RE: New System One 760p Software Question
(05-11-2013, 04:01 PM)raschuyler Wrote: New to Bipap therapy. Havew System One 760 p with heated humidifier. I would like to track my results, but not sure which software I need. I have win 8, and have had no luck so far in my attempts to get sleepyhead to work. Does it not work on win 8. Also what is the appropriate software and how do or where can I get it. If I have to load win 7 or do Linux on another box, I can do that too. Thank you for the help. I did as you said, and it now works! Now, all I have to do is learn and decipher what the software tells me. Thanks again!
05-11-2013, 05:31 PM
RE: New System One 760p Software Question
The clinical manual have some terms explained and available via email
Scroll down to bottom of the page to 'how to ask for a manual via email' http://www.apneaboard.com/adjust-cpap-pr...tup-manual Also this might be of some help SleepHead Glossary: http://sourceforge.net/apps/mediawiki/sl...r_Glossary Encore guide: http://www.healthcare.philips.com/pwc_hc..._Guide.pdf
05-23-2013, 12:56 PM
RE: New System One 760p Software Question
My wife has the 760P series BiPAP (firmware version 3.03). I have installed the latest update to the SleepyHead exe (version v0.9.3-0 build date 02/11/13), and it still will not read the AHI data. Some of the data is read correctly. It seems they have changed the data format from the 560P series CPAP (firmware version 3.02) that I use and for which SleepHead works great. I am also looking for a solution to the 760P.
The Encore software for $99 claims to read all 60 series machines, but I have not purchased it so I cannot confirm this. If someone has purchased it and is using it with the 760P I would appreciate knowing the status.
05-23-2013, 04:09 PM
RE: New System One 760p Software Question
(05-23-2013, 12:56 PM)ArizonaJon Wrote: My wife has the 760P series BiPAP (firmware version 3.03). I have installed the latest update to the SleepyHead exe (version v0.9.3-0 build date 02/11/13), and it still will not read the AHI data.Hi ArizonaJon Did you installed the patch as noted here http://www.apneaboard.com/forums/Thread-...e-software See post #5 for the link "how to obtain the manual via email" Make sure AHI set to on in clinical menu otherwise no AHI displayed if set to off
05-23-2013, 05:08 PM
(This post was last modified: 05-23-2013, 05:09 PM by ArizonaJon.)
RE: New System One 760p Software Question
Thanks for the quick reply. I hope we can solve the issue.
Yes, I used the exe from the link. Just to confirm, it has a date modified of 2/11/2013 and is confirmed in SleepyHead as v0.9.3-0 (beta) Build Date: Feb 11 2013 21:50:25. If this is not correct, please let me know. The AHI is set to ON in the clinical menu. But the AHI data show very large numbers - from over 300 to over 3000. However, from previous use and the read out on the BiPAP, I know the results are less than 5. On the daily report, the Flow Rate, Resp. Rate, Tidal Volume, Minute Vent., Insp. Time, and Exp. Time appear to be working OK. Only Event Flags, AHI, Pressure, Leak and Snore do not work. This is a very new machine - just shipped from Respironics about 5 weeks ago. Its firmware is v 3.03. It replaced her 750P which had failed. If you would like a copy of the data file, I can send it to you.
05-23-2013, 05:49 PM
RE: New System One 760p Software Question
I don,t use the machine or software
Try reboot the machine, unplug from power outlet, wait a minute or two and then plug back See if get sorted out, maybe someone with 760 machine can chime in
05-23-2013, 06:06 PM
RE: New System One 760p Software Question
Have rebooted the machine (and computer) several times and tried different downloads of the data with the same results.
|
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
[News] RECALL THREAD-- IMPORTANT PHILIPS DREAMSTATION & SYSTEM ONE USERS | Sleeprider | 2,964 | 359,388 |
7 hours ago Last Post: btreger |
|
Oscar 1.4.0 software time change | keithy62 | 2 | 121 |
04-12-2024, 05:14 AM Last Post: keithy62 |
|
Resmed Heating System Errors | btreger | 0 | 116 |
04-05-2024, 01:20 PM Last Post: btreger |
|
Inspire system | JThammer | 15 | 385 |
04-04-2024, 11:59 AM Last Post: cdplatt |
|
Airsense 11. Heating system error | Jskier | 6 | 7,040 |
03-30-2024, 12:10 PM Last Post: Ron LI |
|
Foam Removal - Philips System One | peewee44 | 47 | 10,893 |
03-26-2024, 05:46 AM Last Post: jojopuppyfish |
|
Is my Philips Remstar Pro System One working? | alanbc | 11 | 477 |
03-13-2024, 11:41 AM Last Post: alanbc |