Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.
Login or Create an Account
Machine: Philips Respironics BiPAP ST C SeriINTL 30es Mask Type: Nasal mask Mask Make & Model: ResMed Mirage FX Humidifier: Respironics System One CPAP Pressure: 12-18 CPAP Software: OSCAR
11-05-2022, 09:23 AM (This post was last modified: 11-05-2022, 09:27 AM by KeepSmiling.)
RE: New machine, better results?
Hi Chalkie,
Do you have your sleep study? Can you post it. Do you remember what your titration recommended.
Cannot see if results are better with only new results, it would be good to see the old bi-level data. Also make the new OSCAR data smaller so more info can be seen.
The second half of the graph can you expand the view to about 3 min total.
Yes I have a few questions.
If your previous bi-level were 12-18 why go to 8-20. If you had a flat pressure line I may understand 12 was to much pressure. If you had discomfort I would not understand the switch.
1. Why did you switch to a CPAP machine a Bilevel machine. may deal better with some issues.
2. Why did you have a bi-level the first place?
With pressures over 15 on CPAP, during titration, usually a patient is described a bi-level.
If your info on the side, which I copied below, is correct I would put the minimum back to 12. Which with xflex on is giving a minimum of 10 cm pressure. (usually pressure is increased 1cm at a time. Yours was decreased from 12 (old machine) to 8 (new machine).
------
Machine: Philips Respironics BiPAP ST C SeriINTL 30es
Mask Type: Nasal mask
Mask Make & Model: ResMed Mirage FX
Humidifier: Respironics System One
CPAP Pressure: 12-18
CPAP Software: OSCAR
It appears you've posted a chart from last April. It'd be helpful if you'd post a chart for a recent night with the new machine and settings you're trialing.
Machine: Philips Respironics BiPAP ST C SeriINTL 30es Mask Type: Nasal mask Mask Make & Model: ResMed Mirage FX Humidifier: Respironics System One CPAP Pressure: 12-18 CPAP Software: OSCAR
(11-05-2022, 12:47 PM)Dormeo Wrote: It appears you've posted a chart from last April. It'd be helpful if you'd post a chart for a recent night with the new machine and settings you're trialing.
It's definitely 4 Nov.
I suspect this is due to mid-Atlamtic mistranslation as 4/11 here means 4 November
Respironics Dreamstation Auto CPAP ay 8 cm. fixed pressure.
KeepSmiling has asked some good questions. And I agree with her that you'd benefit from a higher minimum, given the number of OAs and Hs you're having.
Just to underline one question: why move from a bilevel machine to one that lacks those capacities? You can simulate ordinary PAP treatment on the bilevel machine but still have a wider range of options available to you if you need them.
Some of your OAs seem to be a bit clustered, and you may be tucking your chin down to your chest for part of the night. Take a look here to get some ideas about using a cervical collar:
Machine: Philips Respironics BiPAP ST C SeriINTL 30es Mask Type: Nasal mask Mask Make & Model: ResMed Mirage FX Humidifier: Respironics System One CPAP Pressure: 12-18 CPAP Software: OSCAR
I don't have a copy of my sleep study, unfortunately.
I have another day's results and am posting it here:
Also a BiPAP chart for comparison
The reason for the switch is apparently an NHS blanket decision. Standard practice is to start people at 8 cm regardless of previous pressures. I know, seems strange but this was the clinician's decision. She wants to raise pressure but says she wants more data first.
I have never been titrated, to the best of my knowledge.
I had a Bi-Level machine to treat complex apnea. On the limited evidence so far it appears this machine is doing a better job of controlling centrals.
My data on the side is actually out of date. My pressure was 12-22 on BiPAP and I now use a Resmed full face mask. Am updating sig.
Not sure how to expand the data to 3 min total...
Respironics Dreamstation Auto CPAP ay 8 cm. fixed pressure.
The Oct 23 looks a mess with no breathing detected breaking up the sections. My worry is that you may not have enough pressure in the auto to treat hypopneas.
Why do you say this machine is better.
Do you want to adjust the pressures?
With a full face mask I would not go lower then about 7 cm EPAP.
Forgot to include, to get the 3 min data, put the curser over the flow rate or any other graph and right click.
For events, you can click on events, then on the arrow to open the events. If you click on the event that eill open it as well. Change view size to the minutes you want.
Machine: Philips Respironics BiPAP ST C SeriINTL 30es Mask Type: Nasal mask Mask Make & Model: ResMed Mirage FX Humidifier: Respironics System One CPAP Pressure: 12-18 CPAP Software: OSCAR
(11-07-2022, 10:58 PM)KeepSmiling Wrote: Forgot to include, to get the 3 min data, put the curser over the flow rate or any other graph and right click.
For events, you can click on events, then on the arrow to open the events. If you click on the event that eill open it as well. Change view size to the minutes you want.
OK, thankyou. It is producing a lower AHI so far (last night 5.XX) and with much lower leaks.
The pressure is defo going to be raised soon.
Respironics Dreamstation Auto CPAP ay 8 cm. fixed pressure.
Can you show us a chart for last night? The last one you posted from 10/31 shows mostly positional apnea. Unless you can get that under control, there's not much good a pressure increase is going to do.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.