Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Slimline/Standard Wrong Setting
#1
Slimline/Standard Wrong Setting
I realize that Slimline vs. Standard has been discussed ad nauseam over the years, but this is a bit different.

A couple of months ago I got an AirCurve ASV that has worked remarkably well.  In the past I'd be into the clinical menu checking things out, but I never wandered into it on this machine until a couple of days ago.

I have a Slimline hose (not ClimateLine) and the machine has been set to Standard in the menu all along.  So I switched it to Slimline.  It didn't seem as comfortable and my numbers were not as good.  Maybe it's all in my mind, but I switched it back to Standard and I slept better and had better numbers.

With an ASV it may be a moot point as the only fixed pressure is my EPAP at 5.0; which always shows up as 4.9 on the machine's Clinical Sleep Report screen.

I don't suppose it is worth the effort, or even possible, to calculate any meaningful setting differences to change and I imagine the advice I will get it to leave it mismatched.

John
Post Reply Post Reply
#2
RE: Slimline/Standard Wrong Setting
John, it's interesting, but impossible to know whether it is an error or a coincidence that therapy is better on standard as we we have not looked at the machine code. Good that standard settings work.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: Slimline/Standard Wrong Setting
In the end I’ll probably file this under... “If it ain’t broke” category.

I have always felt that the Slimline had slightly more pressure to offset the lower volume of air flow. When I first tried one with my S9 way back when the air felt more piercing and I never took to it and just stayed with a standard hose.

I did do somewhat of a split therapy last night. It seemed like the pressure was greater selecting Slimline on the machine over Standard with the Slimline hose. I even experienced a bit of aerophagia. On the Standard machine setting with the Slimline hose the therapy seemed more comfortable and the numbers were a bit better.

I suspect that with my ASV the machine adjusts to a certain breathing pattern (central/complex) and that air volume is not as important. While not making any recommendation, it is interesting for those that feel there is too much air flow.

John
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Question Help! 40 days CPAP no symptom relief. What's wrong? cpapmj 2 122 04-14-2024, 02:16 AM
Last Post: Expat31
  Resmed Airsense 10 time to return to low pressure setting jfchap 3 131 04-13-2024, 03:54 PM
Last Post: SarcasticDave94
  Regular vs Slimline Hose for Airsense 10 Auto IIII 27 7,646 04-12-2024, 02:13 PM
Last Post: G. Szabo
  Tube Temp and Humidity Setting To Avoid Rainout tomkelly 10 269 04-11-2024, 11:11 PM
Last Post: tomkelly
  Trigger Setting Switch - Aircurve 10 MrIvanDrago 4 154 04-09-2024, 12:35 PM
Last Post: MrIvanDrago
  CPAP to ASV setting translation? Moemah123 2 521 04-03-2024, 10:30 AM
Last Post: Yujiyun
Question Not Sure if Setting Changes Helping - Help Appreciated! WiscoKate 6 253 03-25-2024, 11:54 AM
Last Post: WiscoKate


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.