Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

[News] CUSTOM 3-D PRINTED MASKS
#1
Smile 
CUSTOM 3-D PRINTED MASKS
It appears that the holy grail of masks customized to fit your face is getting closer.

3D-printed masks are being considered as an effective way to prevent chronic snoring

"Tailor made 3D-printed masks are being considered as an effective way to prevent chronic snoring.

By 3D scanning the patient’s face from a range of angles and heights, a 3D printer can produce the perfect mask which match their features exactly. Having the mask tailor made to suit the patient also enhances the comfort measurably."

Now, if they can be produced relatively cheaply -- and the scans done by a smartphone, now that will be a breakthrough.
"The object in life is not to be on the side of the majority, but to escape finding oneself in the ranks of the insane." -- Marcus Aurelius
Post Reply Post Reply



Donate to Apnea Board  
#2
RE: CUSTOM 3-D PRINTED MASKS
Apparently Wacker had just reported a breakthrough that allows 3D printing of silicone. So the technology for printing masks with silicone is just being developed, and is probably a few years out from being available and reasonably priced. The following is excerpted from the article I found:

Quote:The reason that 3D printing with silicone hasn’t been viable until now, has to do with the materials properties that make it such a desirable material in the first place. This is because silicone cannot simply be heated up and printed into shapes the same way that thermoplastics or metals are. Traditionally, silicone parts could only be produced using an injection-molding processes, which is quite costly unless being used to manufacture large production runs of products. But the cost of developing molds makes the process far too expensive for general prototyping, customisation and product development needs. In order to make it possible to use silicone for those purposes, WACKER researchers needed to develop a completely different process.

The process that they ended up developing is similar to traditional 3D printing, but uses a glass printing bed, a special silicone material with a high rate of viscosity and UV light. A printing head similar to an inkjet printer lays a thin player of tiny droplets of silicone side by side on a glass printing bed, then the silicone is vulcanized using the UV light. The process is repeated until the desired object is complete, each new layer simultaneously being vulcanized to the layer beneath it. The final objects have virtually smooth surfaces and just like traditionally manufactured silicone parts, are completely biocompatible, heat resistant and transparent.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Optimizing Therapy
Organize your OSCAR Charts
How To Attach Images And Files to your posts
How To Deal With Equipment Supplier
Mask Primer
Beginner's Guide to Sleepyhead

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: CUSTOM 3-D PRINTED MASKS
Hmmmmmm.... Maybe we can find something better than the P10, and all agree on it. Nah, come now what am I thinking!
If everyone thinks alike, then someone isn't thinking.
Everyone knows something, together we could know everything.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [CPAP] Cpap Masks Causing Nasal Dryness Potamantha 4 186 06-17-2019, 04:15 PM
Last Post: Potamantha
  Masks, mouth-breathing Dyssomniac 20 1,007 05-29-2019, 12:31 PM
Last Post: sheepless
  Quick question on changing masks ruthcatrin 5 374 04-11-2019, 06:13 AM
Last Post: ruthcatrin
  F10 vs F20 Full Face Masks Fixit50 19 3,911 03-23-2019, 11:22 PM
Last Post: Technopauper
  Significant AHI results with different masks. ttsleeper 27 1,309 03-05-2019, 05:28 PM
Last Post: KSMatthew
  Masks causing breakouts gsxr1k 4 275 03-04-2019, 03:36 AM
Last Post: crowtor
  [Equipment] Tubes & Masks Compatibility Rany 4 273 02-20-2019, 06:14 PM
Last Post: systema


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.