Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

SleepHead Software
#1
SleepHead Software
I downloaded SleepHead software (Thank You very much!) and was able to import nearly 2 years of data from my old Phillips Repironics System One RemStar Auto with A-Flex (550P) machine. I recently began using a new Phillips Repironics System One RemStar Pro with C-Flex+ (460P) machine and I am unable to upload any data. After import, SleepHead shows my new machine and my old machine under machine information, but no start date or data for the new machine. When I look on the SD card from my PC I can see several days of data. I tried creating a new profile and updating data from the new machine only, but this did not work either. Do you have any suggestions on how to import my current data from my new machine?
Post Reply Post Reply
#2
RE: SleepHead Software
Hi jbarrett1967, I'm sorry I don't know the answer to your question but Welcome! to the forum! and keep checkin' back and someone will be along to help you shortly.
trish6hundred
Post Reply Post Reply
#3
RE: SleepHead Software
I doubt that the new model 460P machine is currently supported by SleepyHead. You might want to go to the SourceForge SleepyHead page report this issue. I believe the author is currently working on getting the new series of PRS1 machines to work with SleepyHead.
Sleepster

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#4
RE: SleepHead Software
(07-28-2012, 01:14 PM)jbarrett1967 Wrote: I recently began using a new Phillips Repironics System One RemStar Pro with C-Flex+ (460P) machine and I am unable to upload any data.
SH don,t support PRS1 60 series yet but coming soon - hopefully
Respironcis own software EncoreBasic and Encore Pro 2.4 or later should work





Post Reply Post Reply
#5
RE: SleepHead Software
Welcome to the forum!!! We are glad you joined us!!! Welcome

I think Zonk is right and the Model 460P machine is not supported in the current version of SleepyHead software. You might want to go to the SourceForge website and report your request.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#6
RE: SleepHead Software
Thank you to everyone for the quick responses.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  ReMed Airsense software/firmware Ralph436 22 1,123 01-23-2024, 11:55 AM
Last Post: george1945
  Contec CMS50E Pulse Oximeter Software John7 0 381 11-12-2023, 09:18 AM
Last Post: John7
  [Equipment] Which 24 Hr Oximeter to buy & PC/Tablet compatible software EasySleep 0 340 11-08-2023, 08:26 AM
Last Post: EasySleep
  Lowenstein Software shawsg 2 585 09-27-2023, 12:10 PM
Last Post: shawsg
  AirSense 11 Stopped Transmitting ?Related to Software Update? YankeeLaker 57 7,077 08-19-2023, 09:54 AM
Last Post: jijididit
  Lumis 100 and correct software for reading a sleep data?? doognibor 3 641 08-08-2023, 02:19 PM
Last Post: Dire
  AirSense 11 water / humidity / software incident rpierce 5 1,194 07-31-2023, 08:53 PM
Last Post: rpierce


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.