Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

No readings on Rescan report- why
#1
For the last two mornings, when I downloaded my recordings from the sim card onto the laptop in Rescan, it does not show
- Summary graphs or
- Statistics
However there are details shown on the Detailed Graphs

Can anyone help and explain why that is and do I fix the problem
Happy sleeping
From Worthog in Brightwater (Mountain Creek)Oh-jeez
Reply
#2
I don,t know its usually the other way around no detailed data as all available data (summary and all detailed data) is not selected when downloading. When the card put back into the S9 summary data get written on the card. One suggestion might work or might not work is try to unplug and plug the S9 sometimes it get rid of any cobwebs and reset, put the card back in the S9 and wait to read the card, take the card out and lock it and try download again. If it don,t work may be try a new card or may be others have some suggestions and you can always try SleepyHead see if its any better.
Reply
#3
You must create a user (new patient) in order to download data.
Reply


#4
The cartd has been recording my readings for approx 6 months. Its just suddenly stopped as I have report above.

I am already a user/patient, so the software does have previous data saved on my previous nights

No help so far and its still recording the same
Happy sleeping
From Worthog in Brightwater (Mountain Creek)Oh-jeez
Reply
#5
Do you have a ResMed S9 - if so what model? In your profile, it says C9, but I assume it's an S9 with a standard SD memory card, correct?

It is possible that the SD card has been corrupted. SD cards can go bad and/or get corrupted.

You can get a new SD card pretty cheap for less than $10 in many places.

Also, make sure you have the slide-lock in the unlocked (up) position before you put it back into your machine (assuming it's an SD card), as shown here:

[Image: SD_memory-lock.jpg]
SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



Reply
#6
Could be a corrupted memory card or you might just try rebooting (power cycle) your machine. If you do decide to try a new memory card, the type pictured in SS's post above is the way to go. I haven't verified it myself, but I've heard that newer high capacity SDHC cards higher than Class 2 can have compatibility issues with the S9 if that's the type of machine you have.
We're all family here...you can call me B36 if you'd like!Cool
Reply


#7
If the card is locked and you put it into the S9, The S9 ask you to remove the card and unlock otherwise it wont start till you unlock the card or remove it plus also worthog got detailed data on the card.
Reply
#8
(06-11-2012, 02:44 PM)zonk Wrote: If the card is locked and you put it into the S9, The S9 ask you to remove the card and unlock otherwise it wont start till you unlock the card or remove it plus also worthog got detailed data on the card.

Okay, didn't know that. Thanks Zonk. So it's not the card-lock causing this then.

Anyone have other ideas?


SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



Reply
#9
Thanks all, I re-formatted the card yesterday and this morning all the data is recorded and displayed on Rescan. So all is back to normal now.

Sorry the machine is a S9, not C9 must alter my profile now

As Zonk said, if you put your card in the machine in "locked" mode the machine tells you, so you do need to unlock it - I was aware of that, thanks anyway
Happy sleeping
From Worthog in Brightwater (Mountain Creek)Oh-jeez
Reply


#10
(06-11-2012, 04:12 PM)worthog Wrote: Thanks all, I re-formatted the card yesterday and this morning all the data is recorded and displayed on Rescan. So all is back to normal now.

Okay good to know. The card data probably got corrupted at some point then. Might want to be careful when taking it out of the machine - don't put it next to any electrical fields like electrical wires, appliances, magnets, etc. That can mess up a an SD card.


SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [CPAP] Sleep Report items massahnia 2 84 Yesterday, 09:57 AM
Last Post: OpalRose
  Progress report David44142 4 157 01-11-2017, 10:21 PM
Last Post: trish6hundred
  ResScan Compliance Report BobF 2 202 12-22-2016, 10:55 AM
Last Post: BobF
  First SleepyHead report for S9 Autoset Lanco 41 1,992 11-27-2016, 05:11 AM
Last Post: Newbee2016
  What report from SleepyHead for FAA? gkainz 5 335 11-23-2016, 09:50 PM
Last Post: KSMatthew
Question [Diagnosis] Sleep Study Report: Lowest Desaturation vs Lowest Saturation blueelement2016 4 360 11-09-2016, 02:37 AM
Last Post: blueelement2016
  Oximetry report Sunshinepostell 3 453 09-09-2016, 08:52 PM
Last Post: trish6hundred

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.