A screen print of what I was viewing (hopefully the same, but I had to reopen Oscar) is attached.
Edit/Print Report command is executed.
The output is two pages, attached, from my scanner.
[attachment=30740] [attachment=30741]
Problems:
1. Two Flow Rate charts occur. The first is for the entire day, and is not wanted. It doesn't show on the screen print. The second (at the top of page 2) is the current selection, shows on the screen, and was expected to print.
2. The Exp. Time chart should appear at the end (on page 3 prn). It looks like the extra Flow Rate may have pushed it off the printout.
I'll gladly e-mail you the ResMed data behind the report if you need it to try and reproduce the problem.