Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

OSCAR report formatting problem
#1
OSCAR report formatting problem
I have used SleepyHead for years and just converted to OSCAR after getting a new APAP. When printing my first report with OSCAR I ran into a problem printing the Standard & Monthly CPAP Statistics reports. In SleepyHead these printed on two pages each with very readable sized text (CPAP Statistics on page 1 and Changes to Prescription Settings and Machine Information on page 2). Now each report is squeezed down to a single page with very small text, one page for Standard and one for Monthly. I haven't been able to find any preferences or other ways to change this. Does anyone know if this can be changed or is this the only way to print those reports with OSCAR.

Also, my profile on the Apnea Board shows my old machine & mask. I don't see a way to edit that. Is it possible to edit it?
Thanks, Joe
Post Reply Post Reply






Donate to Apnea Board  
#2
RE: OSCAR report formatting problem
(10-31-2019, 05:09 PM)JoeS Wrote: Also, my profile on the Apnea Board shows my old machine & mask. I don't see a way to edit that. Is it possible to edit it?
Thanks, Joe

Select UserCP located in the upper right of the webpage.  Look in the lower left Menu->Profile->Edit Profile.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Beginner's Guide to Sleepyhead and OSCAR
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: OSCAR report formatting problem
(10-31-2019, 05:09 PM)JoeS Wrote: I have used SleepyHead for years and just converted to OSCAR after getting a new APAP. When printing my first report with OSCAR I ran into a problem printing the Standard & Monthly CPAP Statistics reports. In SleepyHead these printed on two pages each with very readable sized text (CPAP Statistics on page 1 and Changes to Prescription Settings and Machine Information on page 2). Now each report is squeezed down to a single page with very small text, one page for Standard and one for Monthly. I haven't been able to find any preferences or other ways to change this. Does anyone know if this can be changed or is this the only way to print those reports with OSCAR.

Printing of the statistics report has been fixed for the next version of Oscar now in development and it will use multiple pages as necessary.
The current version of OSCAR is 1.2.0.  We recommend upgrading from any earlier version.

Useful links
Download OSCAR
Best way to organize charts
How to attach charts to your post

Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.
Post Reply Post Reply
#4
RE: OSCAR report formatting problem
Great. Thanks for the quick response. Joe
Post Reply Post Reply






Donate to Apnea Board  
#5
RE: OSCAR report formatting problem
Got it. I made the changes on the web. When I switched from SleepyHead to OSCAR I didn't set up a new profile. My data was converted to my existing profile for the old machine and new data was imported into the old profile. I don't see a way to change the machine data there. If I set up a profile for the new machine is there a way to bring the old data into the new profile?

Thanks,
Joe
Post Reply Post Reply
#6
RE: OSCAR report formatting problem
Joe, if your data is spread between two profiles, you can combine them by copying the information from the old profile and pasting it into the the OSCAR_Data directory. For Windows, this is usually in your Documents folder. Look how the data is organized. You will see under your profile name is a machine profile (Resmed_########). That folder is specific to your new machine, but you can add other machine profiles under your profile name. Just paste the entire machine profile folder with all files and subfolders into your current profile name.

You can have separate profiles for each machine, or combine them under your profile.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#7
RE: OSCAR report formatting problem
I have 3 profiles as I have had a couple of loaner machines over the years. I copied those profile folders themselves with all of their contents into the ResMed ####(new machine) folder but I could still only see the new machine data. I started over and copied the 3 other Machine #### folders from the Joe folder (latest to be used before adding the new machine) into the profile folder for the current machine (Joe Sobel) but I still only show the one-month data. In each case, I restarted OSCAR, selected the Joe Sobel profile and opened it. I must be doing something wrong or I've misunderstood your instructions. Attached is a screenshot of the OSCAR data directory. Can you tell where I've gone wrong? Thanks, Joe


Attached Files Thumbnail(s)
   
Post Reply Post Reply






Donate to Apnea Board  


Possibly Related Threads...
Thread Author Replies Views Last Post
  SleepMaster AdoptopenJDK 11.0.9.1+1 problem todivefor 2 74 11-21-2020, 12:45 PM
Last Post: todivefor
  Update problem: no info re pressure settings Dormeo 6 186 11-16-2020, 06:13 PM
Last Post: Dormeo
  Change date range on Statistics Report Heliop 8 331 11-09-2020, 04:35 PM
Last Post: GuyScharf
  ResScan 5.9 Running Problem Toby Tam 1 103 10-13-2020, 07:03 AM
Last Post: Crimson Nape
Sad Problem installing Oscar with SleepyHead info Tinkerbell 9 158 09-16-2020, 01:46 AM
Last Post: jaswilliams
  How to make an AHI chart report from EncorePro2? Kevin2020 1 114 08-24-2020, 08:02 AM
Last Post: Sleeprider
  OSCAR - Overview Report "Total Time in Apnea" Graph not Populating Synestheat 6 214 07-31-2020, 06:46 AM
Last Post: Synestheat


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.