Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

OSCAR v1.3.1 is released
#1
OSCAR v1.3.1 is released
OSCAR v1.3.1 is released

This is a minor release of OSCAR. We do recommend updating, especially if using ResMed or Fisher & Paykel CPAP machines where improvements have been made since the last release.

OSCAR, the Open Source CPAP Analysis Reporter
~ Official Download Page https://www.sleepfiles.com/OSCAR/  ~

Portions of OSCAR are © 2019-2022 by The OSCAR Team

Changes and fixes in OSCAR 1.3.1 include:
  • [new] Additional Philips Respironics devices tested and fully supported:
    • REMstar Plus (System One 60 Series) (261P) provides only limited information
    • REMstar Pro (System One 60 Series) (460PBT)
    • DreamStation CPAP Pro with Auto-Trial (401X150)
  • [new] Choose AS11 data instead of AS10 data if both are present on the SD card.
  • [new] Add support for new settings codes in recently manufactured 700X110 DreamStations.
  • [new] Add 95% flow limitation to Therapy Efficacy section on Statistics page.
  • [new] Add date range option to Statistics page.
  • [new] Improve appearance and operation of event type and graph comboboxes at bottom of Daily and Overview pages.
  • [new] Skip first 20 seconds of TiVol, RR, and MinVent in ResMed loader.
  • [new] Add ResMed 39423 Canadian Autoset to tested list.
  • [new] Show channel description when hovering over index name on Daily page.
  • [new] Add full support for Wellue CheckMe O2 Max.
  • [fix] Fix pressure values for AutoForHer mode on AS1x.
  • [fix] Fix missing oximetry and motion waveforms on Overview pages.
  • [fix] Fix rare problem of minimum pressure shown as zero on Overview and Statistics pages.
  • [fix] Update Statistics page after editing profile.
  • [fix] Correct selection of CPAP and AutoForHer modes for ResMed AS11 modes.
  • [fix] Skip first 10 seconds of pressure data for ResMed grapths and statistics.
  • [fix] Correct SleepStyle machines sometimes identified as Icon machines.
  • [fix] Improve event flag position in flow graph for DV6 machines.
  • [fix] --datadir option now allows fully qualified paths on Mac and Linux.
  • [fix] Correct value display on exact data points, and near session boundaries with drift.
  • [fix] Link to translations in Credits and Release Notes html is now translated to selected language.
  • [fix] Continue to import DreamStation 1 data even if there is (unsupported) DreamStation 2 data on the SD card.
  • [fix] Automatic Oximetry Cleanup no longer drops samples or supplemental oximeter channels such as movement.
  • [fix] Replace BRICK! message with better wording.
  • [fix] Add footer to first page of printed Statistics report.
  • [fix] Work around a Qt bug on Fedora 35 that caused hangs when selecting files.
  • [fix] Update copyright notices in html files.
For a list of all Release Notes in OSCAR click on Help / About OSCAR / Release Notes

Many of the changes that have occurred have resulted from input from you, the users of OSCAR. Keep them coming in.
Useful links
Download OSCAR (current version is 1.5.1)
Best way to organize charts
How to attach charts to your post

Apnea Board Monitors are members who help oversee the smooth functioning of the Board. They are also members of the Advisory Committee which helps shape Apnea Board's rules & policies. Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.
#2
RE: OSCAR v1.3.1 is released
Oscar 1.3.1 will not load data from SD card.
SD card is the one used in the past.
Can you help?
#3
RE: OSCAR v1.3.1 is released
What computer and operating system are you using? Exactly what model CPAP machine?

If Linux, which version and which build of 1.3.1 did you download?

Please describe exactly what happens when you try to import data?

What version of OSCAR were you using before?
Useful links
Download OSCAR (current version is 1.5.1)
Best way to organize charts
How to attach charts to your post

Apnea Board Monitors are members who help oversee the smooth functioning of the Board. They are also members of the Advisory Committee which helps shape Apnea Board's rules & policies. Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.
#4
RE: OSCAR v1.3.1 is released
I would just like to thank the makers of OSCAR,
I can now understand what is going on and adjust my settings while following up on the results from those different settings.
Changed my life!
Thanks a lot , have a wonderful day.
Cy.
#5
RE: OSCAR v1.3.1 is released
I’m having a problem opening Oscar. I’m on Mac Monterey Ver 12.2.1. I haven’t opened Oscar in about a month and today I just saw the “Loading Summary Data” box and got the spinning beachball. I restarted the computer and got the same thing. Then I came here and installed Ver 1.3.1. Now when I open Oscar I first get a box that says Release Notes and under it Oscar 1.3.1+3calee24 and the list of changes and fixes. I click Close and once again get the spinning beachball. I restarted and again got the same thing. Any suggestions? Thanks. Steve

Update: I sat here for a full ten minutes letting the ball spin while I typed this message and Oscar suddenly opened up. I guess it took a long time to re-read all the data stored. I have a 2019 MacBook Pro. Oh well, I guess I wasn’t patient enough.
#6
RE: OSCAR v1.3.1 is released
Steve - You should have posted sooner, then your data would have loaded quicker. OSCAR is like your car, the problem disappears as soon as you take it to a specialist.

Drop by more often!

- Red
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
#7
OSCAR v1.3.1 is released. THRILLED!
OK... Sleepyhead was my go-to program for years and years.  However, I just got a new ResMed S11 yesterday.  So I switched to OSCAR 1.3.1.  Talk about a smooth transition!  The software is wonderful in every respect, and I congratulate its authors for a masterful evolution of the Sleepyhead product.

This should be the go-to product not only for patients interested in their own apnea health but also for doctors who want detailed monitoring.  

Thanks!
John
#8
transfer OSCAR from one PC to another
Hello, 

Is there a way to transfer OSCAR from one PC to another (all the configs, data)?  Please tell me how or send me a link with instructions.

thank you
#9
RE: OSCAR v1.3.1 is released
Yes, it is possible. Since I don't know what computer OS you're using, here is the simplest version. Download and install OSCAR. Prior to running OSCAR, copy over the OSCAR_Data directory to the same place on the new computer as it is on your old computer. You should be good to go.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
#10
RE: OSCAR v1.3.1 is released
(03-14-2022, 05:53 PM)Crimson Nape Wrote: Yes, it is possible. Since I don't know what computer OS you're using, here is the simplest version.  Download and install OSCAR.  Prior to running OSCAR, copy over the OSCAR_Data directory to the same place on the new computer as it is on your old computer.  You should be good to go.

Thank you.  It's windows 10.  Have a good day.


Possibly Related Threads...
Thread Author Replies Views Last Post
  Will an OSCAR update ever be released? guzzle 3 171 03-07-2024, 07:17 PM
Last Post: Sleeprider
  OSCAR v1.5.1 released Jeff8356 36 6,541 12-22-2023, 06:46 PM
Last Post: daz2264
  OSCAR v1.5.0 released Jeff8356 51 5,390 09-23-2023, 01:27 PM
Last Post: SuperSleeper
  OSCAR v1.4.0 is released GuyScharf 76 14,912 08-07-2023, 11:02 AM
Last Post: LookingForACleverHandle
  OSCAR v1.3.0 is released [old archived thread] Gideon 36 7,516 02-07-2023, 06:58 PM
Last Post: SuperSleeper


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.