Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Only partial data downloaded to SD card
#1
Only partial data downloaded to SD card
Last night's session ended at 7 am but the Oscar data show the end at 4:07am with a AHI of 6.12 instead of 8.0 as per RESMED machine and Myair.
I checked the date and time on the ResMed and it is correct  and all the data downloaded for the last month has been accurate.
Why was the period between 4:07 and 7 not listed? Has anyone else had this problem?
Post Reply Post Reply






Donate to Apnea Board  
#2
RE: Only partial data downloaded to SD card
Please advise the platform you're using and OSCAR version.  Also, You can only import data once in a 24-hour period to OSCAR.  The 24-hour period is from noon to noon. If you imported the data into OSCAR after the 4:07am session, then you will need to purge that particular day's data and then re-import.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Beginner's Guide to Sleepyhead and OSCAR
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: Only partial data downloaded to SD card
Thanks for reply.
I use Win 10 pro and Oscar 1.0.1-r-1
I imported data about 7:30 am after I woke up . I have been doing this every day for over one month without problems.
I tried to import again after 12 noon ( at 5 pm) and same results.
Here are the sessions:
Session Information
 
CPAP Sessions
On
Date
Start
End
Duration
ResMed Session #1588644420

5/4/2020
22:07:10
23:54:11
01h 47m 01s
ResMed Session #1588651080

5/4/2020
23:58:21
01:58:21
02h 00m 00s
ResMed Session #1588658460

5/5/2020
02:01:35
04:07:36
02h 06m 01s

It did not record the last session which lasted about 2 h 9 m and ended at about 7 am.
MyAir  show 8:46 usage hours
Post Reply Post Reply
#4
RE: Only partial data downloaded to SD card
Last night, everything went back to normal and the Oscar import agrees with ResMed  reading and Myair.
Post Reply Post Reply






Donate to Apnea Board  
#5
RE: Only partial data downloaded to SD card
It happened again last night. I found Oscar troubleshooter and purged the partial data from Oscar, placed the card in ResMed  and the SD downloaded the correct number of sessions for the day.
Post Reply Post Reply
#6
RE: Only partial data downloaded to SD card
I had the same issue and found that the sessions weren't ticked "On" in the OSCAR sidebar.

Are you maybe taking the SD card out too quick after waking up? That's really the only thing I can think of... but I'm no expert by any means.
Post Reply Post Reply
#7
RE: Only partial data downloaded to SD card
(05-09-2020, 05:14 PM)Etirpsakdov Wrote: I had the same issue and found that the sessions weren't ticked "On" in the OSCAR sidebar.

Are you maybe taking the SD card out too quick after waking up? That's really the only thing I can think of... but I'm no expert by any means.

Thanks, Etirpsakdov,
I think you may be right. I will make sure to wait a while longer.
Post Reply Post Reply






Donate to Apnea Board  
#8
RE: Only partial data downloaded to SD card
As Crimson Nape said OSCAR can only import your SD card once pre day.. If you typically have multiple sleep sessions and want to look at them betwene sleeep session, then you would need to purge the data and reimport to get the other sessions for that day.

Another option is to wait untill after noon to take the card out. This way multiple sessions will be imported into OSCAR at one time.

It's a matter of patience and what you want to do. Import/purge, import/purge. Or just wait and do it once.

Using a 13" MacBook Air (2017), MacOS Catalina (10.15.4), OSCAR v1.1.0
In a VM: Win10 1909 (18363.836)

Installing OSCAR on a Mac
Organizing your OSCAR charts
Attaching images and files for the forum
OSCAR Help
OSCAR Data Interpretation
Post Reply Post Reply
#9
RE: Only partial data downloaded to SD card
(05-09-2020, 11:06 PM)Jeff8356 Wrote: As Crimson Nape said OSCAR can only import your SD card once pre day..  If you typically have multiple sleep sessions and want to look at them betwene sleeep session, then you would need to purge the data and reimport to get the other sessions for that day.

Another option is to wait untill after noon to take the card out.  This way multiple sessions will be imported into OSCAR at one time.

It's a matter of patience and what you want to do.  Import/purge, import/purge.  Or just wait and do it once.

Thanks Jeff8356
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Viewing Old Data Without Importing New data from an SD Card mjrPdqkLguUgGLE 5 99 05-23-2020, 05:18 PM
Last Post: mjrPdqkLguUgGLE
  Dreamstation CPAP vs Aircurve BiPap data? Data over time for Insp/Exp? Desiree 12 273 05-20-2020, 10:00 PM
Last Post: Sleeprider
Question New here, loaded data to OSCAR - only summary data swampbastard99 5 233 03-10-2020, 01:43 PM
Last Post: Crimson Nape
  Doctors office lost data card Dawnstar 3 487 12-15-2019, 06:26 PM
Last Post: Hydrangea
  [Equipment] no data in memory card prasad 11 674 08-24-2019, 01:28 AM
Last Post: jaswilliams
  question about data card jwells1201 2 544 04-29-2019, 03:10 PM
Last Post: Mosquitobait
  [Equipment] Sleep lab can't read data from Dreamstation SD card JJJ 14 1,486 03-10-2019, 11:27 PM
Last Post: JJJ


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.