Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Oxymeter with ResScan
#1
Question 
Hi everyone,

New to the boards and to the CPAP world, currently done 4 nights on APAP.

I ordered a CMS50I oxymeter. From what I have read so far, I can import the data into Sleepyhead.

But can it somehow be imported into ResScan?

I understand that you can connect an optional module + oxymeter to the Airsense 10 Autoset, but costs a fortune.

Thanks for your help and patience. I hope to be reading these forums regularly.

Pat
Post Reply Post Reply
#2
Hi pat767! - Welcome
The CMS50's can only be used with SleepyHead.  Like you said, ResScan will only work with Resmed's megabuck oximeter.
______________________
Useful Links -or- When All Else Fails:
Robysue's Beginner's Guide to Sleepyhead
Apnea Helpful Tips
Post Reply Post Reply
#3
So basically, when I'll meet up with the doctor for my first follow-up visit, I can verbally relay min/max/avg information to him?

That would complete the report nicely.

Speaking of which, when I pass by to have my reports printed before seeing the doctor, they're printing from ResScan, correct?
Post Reply Post Reply


#4
Your CMS50 data will appear on the Statistics page of SleepyHead.  Depending if your doctor will accept it, you could present him/her with a printout of this  page,   If you are under some required monitoring authority, then ResScan will probably be your only route since SleepyHead hasn't been approved or certified.  .  .  That I know of.

Edit:
After looking at your screen name, you might be a Boeing driver. If you need to report to the TCCA or FAA then ResScan is your only avenue.
______________________
Useful Links -or- When All Else Fails:
Robysue's Beginner's Guide to Sleepyhead
Apnea Helpful Tips
Post Reply Post Reply
#5
Pat,

My PMD was quite pleased with the reports from the SpO2 Assistant - The sw that came with  my CMS50.  He was not at all bothered that the time stamps were not exactly in sync with the reports from ResScan.  Additionally, the same SpO2 reports were accepted by the equipment provided to fill an Rx for supplemental nighttime O2.

Regards,

-m-
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  ResScan? Kaunakakai 51 3,626 12-23-2017, 02:07 PM
Last Post: Walla Walla
Information [Admin Note] New ResScan version 5.9 SuperSleeper 15 1,492 12-14-2017, 03:52 PM
Last Post: laneleonard
  ResScan Data mikeh99 13 567 12-10-2017, 09:39 PM
Last Post: SarcasticDave94
  Sleepyhead vs. ResScan Pre-Installation Questions Ron The Piper 10 717 11-22-2017, 08:42 PM
Last Post: AlanE
  Comparing ResScan to Sleepyhead over a long period calcuttaman 3 324 11-22-2017, 12:28 PM
Last Post: pholynyk
  AirView vs ResScan yankees123 2 341 10-12-2017, 01:33 PM
Last Post: yankees123
  ResScan Help-How to print 1yr. Certificate? Zerojunk 1 401 09-06-2017, 08:04 PM
Last Post: Sleeprider

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.