Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Power Supply DS2, DS1
#1
Power Supply DS2, DS1
Hmmm? I received a replacement DS2 for my DS1 a few days ago. Instructions say to return the DS1. I'm considering not sending back the power supply of my DS1 because I think it could be a backup if the DS2's power supply ever failed. 

The DS1's is bigger and marked 80W on the top and on the bottom. The ratings show:

Input: 100-240V ~50/60 Hz, 2.0-1.0A
Output 12V 6.67A

The DS2's power supply has the same ratings and the same connector to the unit. 

The DS1's is made in Germany, the DS2's in China.

Question: Do you think the DS1's power supply is OK to use with the DS2? I'm just a bit concerned about the DS2's power supply not having 80W on it anywhere. 

Thanks in advance for your feedback.
Post Reply Post Reply






Donate to Apnea Board  
#2
RE: Power Supply DS2, DS1
Sorry folks, I was lazy. Google is your friend. Volts multiplied by Amps = Watts. So both units are 80 watts. (6.67amps X 12 volts = 80.04 watts)

Well, maybe my post will help someone else. I'm keeping the DS1 power supply as a backup.
Post Reply Post Reply
#3
RE: Power Supply DS2, DS1
Check to see if your DS2 turns on with the DS1 power supply. They have an identification resistor in the power cable to prevent use of the wrong power supply. Let us know if it works or if they did something stupid and changed the value.  I don’t know of any good reason they would change it.
Post Reply Post Reply
#4
RE: Power Supply DS2, DS1
Volts needs to match, although many times close-enough works, but I wouldn't mess with that. As for amps, as long as the power supply is >= the amps required (should be somewhere on the machine itself) it should be good to go.
Post Reply Post Reply






Donate to Apnea Board  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Devilbiss 12 volt power cable Cuppa 1 39 Yesterday, 12:29 AM
Last Post: Cuppa
  Philips Respironics DreamStation check power Steve Foley 13 5,144 09-14-2021, 06:27 PM
Last Post: LindanHotAir
  Battery Power Question??? Tennessee Cattleman 2 238 07-16-2021, 07:57 AM
Last Post: Tennessee Cattleman
  [Equipment] Help solving power issue (REMstar Auto A-Flex cycling off/on during use)) RhythmMachine 2 161 07-13-2021, 07:01 PM
Last Post: RhythmMachine
  Will this work for battery power for Resmed S9? Lanco 7 277 06-22-2021, 11:41 AM
Last Post: Nightynite
  [Equipment] ResMed Power Converter Sleepster 3 289 05-10-2021, 07:41 PM
Last Post: SideSleeper
  "Not in stock at local branch level" medical supply Apria tierdal 6 394 04-20-2021, 10:04 PM
Last Post: tierdal


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.