Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

[Pressure] Changing pressure on HDM Z1 cpap
#1
To change the pressure setting on the HDM Z1 travel cpap,
follow these instructions.

1. Make sure the cpap is not active (screen should show
a pressure of 0.0
2. Simultaneously press the blue spot above the screen
and the start button below the screen.
3. Hold for several seconds until the current pressure setting
shows.
4. Use the up/down buttons to set the desired pressure.
5. Again, simultaneously press the blue spot and the start
button for several seconds to ensure the pressure change
is stored.
Post Reply Post Reply
#2
Any chance you can email us a copy of the Clinician Setup Guide or Clinician Manual?

Email address is: apneaboard@gmail.com


Pretty please? Smile
SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



Post Reply Post Reply
#3
Sorry, I don't have the manual; I discovered how
to do it by experimenting with the buttons;
previous experience with a different cpap machine
gave me some clues as to how to do it.
Post Reply Post Reply


#4
Hi dmh,
WELCOME! to the forum.!
trish6hundred
Post Reply Post Reply
#5
(12-16-2013, 07:58 PM)dmh Wrote: To change the pressure setting on the HDM Z1 travel cpap,
follow these instructions.

1. Make sure the cpap is not active (screen should show
a pressure of 0.0
2. Simultaneously press the blue spot above the screen
and the start button below the screen.
3. Hold for several seconds until the current pressure setting
shows.
4. Use the up/down buttons to set the desired pressure.
5. Again, simultaneously press the blue spot and the start
button for several seconds to ensure the pressure change
is stored.

Just adjusted mine -- the blue spot is not a button; all you need to do is hold the center/start button for steps 2 and 5.
Post Reply Post Reply
#6
Hi tomchavez, WELCOME! to the forum.!
trish6hundred
Post Reply Post Reply


#7
Hi,

When I follow these instructions on my Z1, I can change the pressure. However, when I start the machine it cranks up to the original pressure, not the newly set one. Any advice? I've successfully reset pressure on many machines in the past but this HDM Z1 has me stumped.
Post Reply Post Reply
#8
Oops - figured it out - I was not holding the on/off button after changing the pressure long enough to program the new setting. Have it working now.
As tomchavez states, just holding the power button for 3 seconds is enough, there is no hidden 2nd button.
Post Reply Post Reply
#9
(12-16-2013, 08:58 PM)SuperSleeper Wrote: Any chance you can email us a copy of the Clinician Setup Guide or Clinician Manual?
Email address is: apneaboard@gmail.com
Pretty please? Smile
I have the clinicians manual for the Z1 Auto. Tomorrow if I can remember, I will bring it into work with me, get it scanned and emailed to you.

Post Reply Post Reply


#10
I am trying to learn how to change the pressure on my newly received HDM Z1. I have followed the above instructions but once the target pressure is displayed, I find that I cannot change that setting with the up and down buttons. Any suggestions? Thanks
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [Equipment] Alt Way of Changing Primary Machine in Dreammapper scneal 2 59 4 hours ago
Last Post: scneal
  Autoset 90 percentile pressure vs. Titration study pressure CDNHoser 12 187 Yesterday, 09:02 PM
Last Post: Sleepster
  Pressure at altitude vs. pressure at lower elevations...? S.L. Ping Beauty 19 265 10-17-2017, 09:36 PM
Last Post: PaulaO2
  My nostrils keep changing sizes... HalfAsleep 7 186 10-08-2017, 07:38 PM
Last Post: HalfAsleep
  ASV users - effects of higher pressure vs CPAP? Stevie1under 7 273 10-05-2017, 05:47 PM
Last Post: Stevie1under
  RERA's and CPAP Pressure Please Help fitmart 6 217 10-04-2017, 05:18 AM
Last Post: fitmart
  [Equipment] Viscious cycle of increased pressure -> more leak -> response of more pressure 3mp0w3r 5 255 09-16-2017, 09:04 AM
Last Post: OpalRose

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.