Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
Problem with mask's fitting to tubing?
|
01-23-2015, 06:59 PM
(This post was last modified: 01-23-2015, 06:59 PM by Dyssomniac.)
RE: Problem with mask's fitting to tubing?
01-24-2015, 11:33 AM
RE: Problem with mask's fitting to tubing?
Update: I tried the machine again last night, and it was completely back to normal. I guess the flapping was a side effect of the experimentation with humidification.
Thanks again for the help on it.
01-24-2015, 01:26 PM
RE: Problem with mask's fitting to tubing?
Don't let that stop you from experimenting! Even bad results can be enlightening. What you experienced is a design feature of the machine and not a flaw. Enlightenment = It served to point out the fact that if your air flow fall too low the life saver flap is working to save you.
Thanks for posting the update. Best regards, Dude
01-24-2015, 11:24 PM
RE: Problem with mask's fitting to tubing?
The flapping since you went to manual humidification mode probably was due to water being in the valve. The PRS1 does not have a cool down mode like the resmed. when its on its on and when its off its off.
You might have to low a min pressure or you could have the System one resistane setting wrong for the mask your using and low min pressure combined that could cause it. |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
AirFit F30i Mask Problem | OldTeacher | 22 | 4,557 |
03-23-2024, 03:23 PM Last Post: ButtonNoseBarbie |
|
[CPAP] ResMed Air Sense 10 Auto Off Problem | Buddie43 | 19 | 26,322 |
03-05-2024, 10:50 PM Last Post: Ailyhsaun |
|
Are these flow limits my problem? | k888 | 87 | 5,456 |
02-26-2024, 12:02 PM Last Post: k888 |
|
[Treatment] Are leaks the problem or do I need BIPAP? | TiredDude | 3 | 328 |
02-22-2024, 07:52 PM Last Post: Sleeprider |
|
[CPAP] Is my leak rate a problem? | Kevstuf | 5 | 549 |
02-08-2024, 10:25 AM Last Post: Kevstuf |
|
If nasal congestion is a problem, will this show in my AHI? | canigetawitness1992 | 4 | 388 |
01-29-2024, 09:20 PM Last Post: RNeil |
|
Using cleaning brushes in heated tubing | TiredTom111 | 9 | 604 |
01-29-2024, 08:30 PM Last Post: TechieHippie |