Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Pulse Changes missing in Overview OSCAR 1.2.0
#1
Pulse Changes missing in Overview OSCAR 1.2.0
Finally bit the bullet and upgraded to OSCAR on Laptop to test run this.

Imported last few days data, all working well.

Oh, And all the daily data under Overview>Pressures are now there which is great.

But on the Updated Laptop OSCAR 1.2.0 the Pulse Changes are missing in the Overview tab.

What shall I do to make them re-appear please?

Thanks

Chris

Plse see attached.
   

   
Post Reply Post Reply






Donate to Apnea Board  
#2
RE: Pulse Changes missing in Overview OSCAR 1.2.0
Go to File → Preferences → Waveforms. Scroll down to the Oximeter Waveforms and place a checkmark in the Overview column for this parameter.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Beginner's Guide to Sleepyhead and OSCAR
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: Pulse Changes missing in Overview OSCAR 1.2.0
Hi Crimson Nape thanks for the fast reply.

I have checked this as suggested still not showing the PR changes

(I noticed now the SpO2 is also not showing)

does this mean i have to re-import all data?

Or purge first?

or does Rebuild data do the same thing (excuse my ignorance, I am not clear on what rebuilding does)

thanks!

Edit: image now attached.    
Post Reply Post Reply
#4
RE: Pulse Changes missing in Overview OSCAR 1.2.0
I found mine in Preferences > Events
Scroll down to the "Oximeter Events" and tick the box under the "Overview" column

Should show up in Overview after that.
Using a 13" MacBook Air (2017), MacOS Catalina (10.15.7), OSCAR v1.2.0
In a VM: Win10 1909 (18363.836)

Installing OSCAR on a Mac
Organizing your OSCAR charts
Attaching images and files for the forum
OSCAR Help
OSCAR Data Interpretation
Post Reply Post Reply






Donate to Apnea Board  
#5
RE: Pulse Changes missing in Overview OSCAR 1.2.0
(10-18-2020, 11:08 AM)Jeff8356 Wrote: I found mine in Preferences > Events
Scroll down to the "Oximeter Events" and tick the box under the "Overview" column

Should show up in Overview after that.

Yes I have that checked as well. What that does is show up in the Events Flags section.

Still nothing when go to Overview and select the following sections:
Flow Rate: nothing there. 
SpO2: nothing in the Overview section. All my daily charts show the oxygen levels.
Pulse Rate: nothing there, same comment,
Pulse Rate change: nothing there.

How would I get this data to show in the Overview section please?

On another note: I am looking at this in v1.0.1-r-1 on the Desktop and the Overview Section still has data missing.
see attached here:

   

The Pulse Rate change data is there: not in V1.2.0 on my laptop (same SD card used)
The Flow Rate data is missing!
The SpO2 has One Data entry under April 19, then when I hover over it is says 18 Oct 2020. (?)
Same with Pulse Rate.
BUT all the Pulse Rate Change data is there.

I don't believe this can be a bug because others would have noticed it, is it my system or my not understanding OSCAR well enough yet?

thanks for all help in advance.
Post Reply Post Reply
#6
RE: Pulse Changes missing in Overview OSCAR 1.2.0
Ticking those boxes is what gets it to show up in Overview for me.

   

   


I don't normally have them displayed at all.  Just ticked them to try to help figure out whats going on with yours and they showed up in Overview.  Strange....
Using a 13" MacBook Air (2017), MacOS Catalina (10.15.7), OSCAR v1.2.0
In a VM: Win10 1909 (18363.836)

Installing OSCAR on a Mac
Organizing your OSCAR charts
Attaching images and files for the forum
OSCAR Help
OSCAR Data Interpretation
Post Reply Post Reply
#7
RE: Pulse Changes missing in Overview OSCAR 1.2.0
Yep it is strange.

do you think a Purge data or rebuild might help?

I have half a mind to just remove the profile from Oscar in my laptop and then import all data again.

Might just give that a try.
Post Reply Post Reply






Donate to Apnea Board  
#8
RE: Pulse Changes missing in Overview OSCAR 1.2.0
Which ever you decide, don't forget to make a backup of your current OSCAR_Data first.  Don't ask me how I know that....   Bag-head
Using a 13" MacBook Air (2017), MacOS Catalina (10.15.7), OSCAR v1.2.0
In a VM: Win10 1909 (18363.836)

Installing OSCAR on a Mac
Organizing your OSCAR charts
Attaching images and files for the forum
OSCAR Help
OSCAR Data Interpretation
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  SPO2/Pulse : Apple Watch, Fitbit, etc georgelewisray 2 189 10-02-2020, 11:35 AM
Last Post: Neighborgeek
  Pulse Oximeter Contec CMS50F GerardH 20 903 09-21-2020, 11:06 PM
Last Post: Bobaloo
  Missing Info in summary table Big Timber 5 172 08-29-2020, 10:10 AM
Last Post: Sleeprider
  Added a new pulse oximeter importer... spacewrench 97 4,496 08-22-2020, 07:13 AM
Last Post: MyNameWasTaken
  Oscar export of contained pulse ox data on the virge 2 121 08-21-2020, 03:34 PM
Last Post: on the virge
  OSCAR Overview Pressure Plot not showing real Max sopherFellow 8 178 08-17-2020, 11:09 AM
Last Post: bonjour
  Last night is missing after updat to Oscar 1.1.1 with Resmed AirSense 10 Pythagoras 6 434 08-07-2020, 02:15 AM
Last Post: Pythagoras


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.