Post Reply 
RESMED AIRSENCE 10 AUTO MYAIR
Author Message
jtprop Offline

New Members

Posts: 3
Joined: Feb 2016

Machine: Fisher & Paykal Icon Auto
Mask Type: Nasal pillows
Mask Make & Model: Resmed p10
Humidifier: Built in
CPAP Pressure: 7.5 - 12 cm/h20
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location: Melbourne Australia

Post: #1
RESMED AIRSENCE 10 AUTO MYAIR
I HOPE SOMEONE CAN ANSWER MY QUESTION ABOUT RESMEDS MYAIR. IM THINKING OF PURCHASING THE RESMED AIRSENCE 10 AUTO FROM THE USA AND IM NOT SURE IF THE WIRELESS DATA AND RESMEDS MYAIR AND AIRVIEW WOULD WORK HERE IN AUSTRALIA. I WOULD APPRECIATE IT IF SOMEONE COULD ANSWER THIS FOR ME.
04-09-2016 07:12 AM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
DeepBreathing Offline
Wiki Editor
Moderators

Posts: 2,296
Joined: Sep 2013

Machine: Resmed S9 VPAP Adapt
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: Resmed H5i
CPAP Pressure: EPAP: 9 - 15 PS: 3 - 10
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Perth, Western Australia

Post: #2
RE: RESMED AIRSENCE 10 AUTO MYAIR
G'day jtprop, welcome to Apnea Board.

From what I understand the American version of the machine won't connect to the Australian version of MyAir. On the other hand, SleepyHead will probably give you far better and more detailed information than MyAir.

By the way, please don't type in all capitals - it looks like you're SHOUTING! Wink

DeepBreathing
Apnea Board Moderator
www.ApneaBoard.com


Bed

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
04-09-2016 08:11 AM
Find all posts by this user Post Reply Quote this message in a reply
trish6hundred Offline

Advisory Members

Posts: 6,453
Joined: May 2012

Machine: Resmed S9 AutoSet for Her
Mask Type: Full face mask
Mask Make & Model: Fisher & Paykel Simplus
Humidifier: H5i Heated Humidifier
CPAP Pressure: 10 - 7-20 Cm H2O
CPAP Software: Not using software

Other Comments: I started CPAP in 2008. Totally blind since birth.

Sex: Female
Location: Missouri, USA

Post: #3
RE: RESMED AIRSENCE 10 AUTO MYAIR
Hi jtprop,
WELCOME! to the forum.!
Hang in there for more responses to your post and much success to you with your CPAP therapy.

trish6hundred
04-09-2016 07:08 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Mike1953 Offline

Preferred Members-2

Posts: 134
Joined: Aug 2014

Machine: Resmed S9 Escape Auto
Mask Type: Nasal pillows
Mask Make & Model: Resmed P10
Humidifier: Resmed Hi5
CPAP Pressure: 12
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Kansas USA

Post: #4
RE: RESMED AIRSENCE 10 AUTO MYAIR
My Air is not all that great Sleepyhead is much better or use ResScan. And please don't shout at anyone here! All caps is shouting and its not very nice!!!!!!!!

For free Medicare assistance for your state check out this page. http://www.seniorsresourceguide.com/directories/National/SHIP/
or here http://www.medicareinteractive.org/
04-12-2016 04:39 PM
Find all posts by this user Post Reply Quote this message in a reply
Possum Offline

Advisory Members

Posts: 254
Joined: Oct 2015

Machine: Resmed Airsense Autoset A10
Mask Type: Nasal pillows
Mask Make & Model: Airfit P10
Humidifier: (included in CPAP model)
CPAP Pressure: 8-12
CPAP Software: ResScan SleepyHead

Other Comments: Innovo CMS-50F+ pulse oximeter

Sex: Male
Location: San Diego, California, USA

Post: #5
RE: RESMED AIRSENCE 10 AUTO MYAIR
I can confirm that if you purchase the model made for the United States, the modem will only work with American cellular systems. It did not work for me throughout Europe, for example. However, I concur that MyAir is mostly useless - it only provides a very high level, shallow view of your data. If you're going to be a PAP'er, do it right and learn how to analyze your own data and take charge of your own therapy!

(stepping down off soap box) Smile
04-12-2016 10:59 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
BobF Offline

Preferred Members-2

Posts: 97
Joined: Aug 2012

Machine: ResMed Airsense 10
Mask Type: Full face mask
Mask Make & Model: Respironics Blue Gel Full Face Large
Humidifier: Built in
CPAP Pressure: 12.8
CPAP Software: ResScan

Other Comments:

Sex: Male
Location: So. CA.

Post: #6
RE: RESMED AIRSENCE 10 AUTO MYAIR
(04-09-2016 08:11 AM)DeepBreathing Wrote:  G'day jtprop, welcome to Apnea Board.

From what I understand the American version of the machine won't connect to the Australian version of MyAir. On the other hand, SleepyHead will probably give you far better and more detailed information than MyAir.

By the way, please don't type in all capitals - it looks like you're SHOUTING! Wink

I have seen comments on wireless SD cards. The data is read by ResMed via cell phone. Is there any way to access the detailed data myself other than taking the SD card out every day and using ResScan or Sleepyhead which is what I do? Thanks, Bob.
(This post was last modified: 04-13-2016 03:20 PM by BobF.)
04-13-2016 03:19 PM
Find all posts by this user Post Reply Quote this message in a reply
sdb7802 Offline

Advisory Members

Posts: 199
Joined: Jan 2016

Machine: PR DreamStation Auto
Mask Type: Nasal pillows
Mask Make & Model: ResMed AirFit P10
Humidifier: built-in with heated hose
CPAP Pressure: 9.5-14 C-Flex 3
CPAP Software: SleepyHead

Other Comments: Retired Electrical Engineer; began using cpap in 2001; FlashAir wifi card and FlashPAP app

Sex: Male
Location: Georgia, USA (The Margravate of Azilia)

Post: #7
RE: RESMED AIRSENCE 10 AUTO MYAIR
I've had good luck with the Toshiba Flash Air III 16GB (PFW016U-1CCW).

I use FlashPAP to configure the card and download the data. (I use station mode.)

You can also use SleepMaster.

Just my personal opinion. My posts are not medical advice or a statement of fact. Please consult a qualified physician or other qualified medical personnel. Please comply with all applicable laws, codes, regulations, and protocols.
04-13-2016 03:26 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
BobF Offline

Preferred Members-2

Posts: 97
Joined: Aug 2012

Machine: ResMed Airsense 10
Mask Type: Full face mask
Mask Make & Model: Respironics Blue Gel Full Face Large
Humidifier: Built in
CPAP Pressure: 12.8
CPAP Software: ResScan

Other Comments:

Sex: Male
Location: So. CA.

Post: #8
RE: RESMED AIRSENCE 10 AUTO MYAIR
(04-13-2016 03:26 PM)sdb7802 Wrote:  I've had good luck with the Toshiba Flash Air III 16GB (PFW016U-1CCW).

I use FlashPAP to configure the card and download the data. (I use station mode.)

You can also use SleepMaster.
Thanks. How easy is it to setup on a PC? Can ResMed still communicate and read the data via the built-in cell phone so they can read my compliance data or reset my setup (pressure etc.). Can I still remove the card and read my data with ResScan in tbe usual manner if I wish? Bob.
04-13-2016 04:22 PM
Find all posts by this user Post Reply Quote this message in a reply
sdb7802 Offline

Advisory Members

Posts: 199
Joined: Jan 2016

Machine: PR DreamStation Auto
Mask Type: Nasal pillows
Mask Make & Model: ResMed AirFit P10
Humidifier: built-in with heated hose
CPAP Pressure: 9.5-14 C-Flex 3
CPAP Software: SleepyHead

Other Comments: Retired Electrical Engineer; began using cpap in 2001; FlashAir wifi card and FlashPAP app

Sex: Male
Location: Georgia, USA (The Margravate of Azilia)

Post: #9
RE: RESMED AIRSENCE 10 AUTO MYAIR
Fairly easy. Yes. Yes.

IMHO, SleepyHead is much better than ResScan.

Just my personal opinion. My posts are not medical advice or a statement of fact. Please consult a qualified physician or other qualified medical personnel. Please comply with all applicable laws, codes, regulations, and protocols.
(This post was last modified: 04-13-2016 04:38 PM by sdb7802.)
04-13-2016 04:36 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
BobF Offline

Preferred Members-2

Posts: 97
Joined: Aug 2012

Machine: ResMed Airsense 10
Mask Type: Full face mask
Mask Make & Model: Respironics Blue Gel Full Face Large
Humidifier: Built in
CPAP Pressure: 12.8
CPAP Software: ResScan

Other Comments:

Sex: Male
Location: So. CA.

Post: #10
RE: RESMED AIRSENCE 10 AUTO MYAIR
(04-13-2016 04:36 PM)sdb7802 Wrote:  Fairly easy. Yes. Yes.

IMHO, SleepyHead is much better than ResScan.

Are there any detailed instructions to setup a Desktop WIN7 PC and the card to read the data? Can I use ResScan to access the wireless data or does the data go into a folder on my PC that I can access with ResScan? Thanks, Bob.
04-13-2016 04:57 PM
Find all posts by this user Post Reply Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Newbie MyAir Score 93 with AHI of 34 dgdmn 10 260 12-08-2016 10:15 AM
Last Post: Sleeprider
  ResMed Airsense 10 Auto Set...Runaway Pressure Abnormal86 14 586 11-22-2016 11:39 PM
Last Post: sonicboom
  [CPAP] ResMed Air Sense 10 Auto Off Problem Buddie43 16 3,292 11-12-2016 02:51 PM
Last Post: sonicboom
  difference between Apex XT Auto and Resmed S9 Autoset Lanco 11 452 10-11-2016 03:29 PM
Last Post: Sleeprider
  airsense10 auto cpap(for him) VS DreamStation Auto CPAP DSX500T11 w/HT humid rookiepom 5 880 10-09-2016 07:52 AM
Last Post: stephennic
  Resmed MYAIR Events per hr results ressler76 6 1,557 10-01-2016 11:07 PM
Last Post: Sleepster
  Help please new user Resmed auto 9 VERY loud mom1mg 14 741 09-26-2016 07:49 PM
Last Post: RWSENGRG

Forum Jump:

Who's Online (Complete List)