Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Remstar error 77 fix
#1
Thanks to every one, I just fixed my Remstar Pro 2 with error 77. Instead of gluing the tiny little barb back on, I just enlarged the hole enough to insert the tube it's self, then sealed it with some super glue. Tested and it works fine.
Post Reply Post Reply
#2
Welcome
Glad it worked for you . E-77: ERR_UNDER_PRESSURE
possible cause :
1- Occluded or restricted tube ... Replace Pressure tubing
2- Defective PCA ... Replace Main PCA
http://www.apneaboard.com/wiki/index.php...rror_codes

Post Reply Post Reply
#3
Hi andyfc and WELCOME! to the forum.
Glad your fix worked, hope your machine continues to work well for you.
trish6hundred
Post Reply Post Reply


#4
The official Apnea Board tube adhesive is Epoxy resin, but hey, sometimes 'ya gotta go against the stream and innovate with Super Glue.

We won't hold it against you.. Bigwink

Grin

Oh, and welcome to Apnea Board, Andy. Coffee
SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



Post Reply Post Reply
#5
(11-07-2012, 10:49 PM)SuperSleeper Wrote: The official Apnea Board tube adhesive is Epoxy resin, but hey, sometimes 'ya gotta go against the stream and innovate with Super Glue.

Geez, I've got a bunch of Respironics ComfortGel masks held together with epoxy glue from when they had the fragile design where the headgear clipped to the mask frame. It actually worked pretty well, but it looked like the disgusting aftermath of a lot of nights of runny nose.

Get the free SleepyHead software here.
Useful links.
Click here for information on the main alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check it yourself.
Post Reply Post Reply
#6
(11-08-2012, 04:10 AM)archangle Wrote: It actually worked pretty well, but it looked like the disgusting aftermath of a lot of nights of runny nose.

Yes, after my wife looked at one of my Epoxy jobs, she asked, "What is that mess?"...

I replied, "I can't tell you exactly what it is, but I can tell you what it's snot".

Looked like a ball of yellow snot. Blowing-nose

... but it got the job done! Happy Eyes
SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



Post Reply Post Reply




Possibly Related Threads...
Thread Author Replies Views Last Post
Sad [CPAP] Res Med S9 help! Error: Settings reset to default values, please contact service pr dexter020281 14 10,835 02-18-2017, 01:22 AM
Last Post: vsheline
  ResMed S9 Humidifer 5i Error Message atta_gurrrrl 4 2,729 02-05-2017, 07:56 AM
Last Post: gjw
Gross [CPAP] Respironics REMStar System One Series 60 Repair lempface 6 270 02-04-2017, 07:01 AM
Last Post: cate1898
  SD Card Error (Nothing new) justMongo 3 159 02-02-2017, 10:22 AM
Last Post: Crimson Nape
  [Equipment] REMStar Pus C-Flex reset TxUtopian 36 31,663 01-30-2017, 09:25 PM
Last Post: cophbulls
  Setting the Time on RemStar Auto IQ 450 P HenryECole81 2 133 01-29-2017, 12:53 PM
Last Post: HenryECole81
  Remstar Auto M Series "Service Required" msgill59 4 367 01-22-2017, 08:57 AM
Last Post: msgill59

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.