Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Reports/data not matching !
#11
With the 10 series you do not need to lock the card, that was an bug for the S9 series. I have been running my SD card unlocked for 3 months with no issues.

The myair is not particularly valuable for improving your settings. It is largely focused on compliance and overview issues, time used, AHI, #times mask off and on, and leaks. To improve your performance you need to get the sleepyhead going and download the data from the card into sleepyhead , then post the information.

The only reason I mentioned the WiFi thing is because people get the mistaken idea that if they do not have a WiFi network they cannot use the myair, and that is not the case at all.

Best Wishes and good luck on the PAP journey and get those plots posted and see if their is any improvements that can be made to improve your experience.
Post Reply Post Reply
#12
TASmart wrote:  "To improve your performance you need to get the sleepyhead going and download the data from the card into sleepyhead , then post the information".

I already downloaded Sleepyhead and I loaded data from the SD card which indicated that there have been NO apnea episodes, as well, the "efficacy" flalt-lined, I have NO idea why this data is so different from what my machine report sends?

On my machine, the THERAPY mode has limited functions/options ... all I did was insert the SD card and let it record, then I inserted the "locked card" as instructed  ...

Thanks !
Post Reply Post Reply
#13
If you do not post the plots nobody here and say much of anything about your results. I do not know what you mean by the efficacy data?  Also are you saying that the AHI is 0 or just the apnea are 0?
Post Reply Post Reply


#14
You can get more complete data by going into the clinic mode (hold the selector knob and the home button down at the same time for a few seconds then enable the plus option under the essentials. You can request the clinitions manual through the link at the top of the page "CPAP Setup manuals". 

I am having issues with the editor here, so bear with me.  You should post screenshots of your Sleepyhead daily plots to imgur, then you can link them in a message here for the knowledgeable member to comment on what they see. 

Are you saying that the AHI is 0 or that the apnea are 0.?

As far as efficacy, I don't know what you are referring to with that that one. Are you referring to the myair daily rating? Its pretty worthless, its focus is hours of use, it's mostly a feel-good keep you interested score, no good for really looking at your information.
Post Reply Post Reply
#15
TASmart:

I followed your advice and switched my unit to the PLUS option.

My Sleepyhead page shows a section labeled EFFICACY ... Under AHI, there is nothing, 0 is what I see.

Forgive my ignorance, I have never used imgur, I assume that's another thing I should download ? I did try linking my Sleepyhead page but that didn't work so well.

OK ... really appreciate your patience, brain fog and fighting through sleepiness all day long is no fun !
Post Reply Post Reply
#16
Hi raggaemon. Stick with it. It will get better. See my signature lines below on how to arrange your Sleepyhead data and how to download via Imgur.
Post Reply Post Reply


#17
[attachment=3472]
(05-14-2017, 02:43 PM)TASmart Wrote: Is the posting via "WiFi" the myair program? If so, it is not via WiFi, but it's a web based program that uploads the summary data to Resmed via cellular phone service. For three events per night then your AHI should be in the 3 events /8 hours  = .4 AHI if the events are OA, CA or Hypopneas. Is this correct? Then you can follow guidelines in the links at the bottom of Crimson's post above to upload and share the plots from sleepyhead so we can have a look see at them.
Post Reply Post Reply
#18
Can we see the daily tab. but at that low pressure, and with nothing showing something sure does not look right to me. You are running at a pressure of 5.3 cm h2o, with a pressure relief of 3, and since the lowest these machines can go is 4 cm h20, your treatment is varying between 5.3 on inhale and 4 on exhale and still getting no apnea nor hypopnea. ???
Post Reply Post Reply
#19
For Example here is my statistic page:

[Image: dg0EZ3dl.png]
Post Reply Post Reply


#20
[Image: dg0EZ3dl.png]

For example here is my statistic page.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Sleepyhead data vs. Doctor's data Daisylouu 10 2,352 08-03-2017, 10:45 PM
Last Post: Mosquitobait
  Sleepyhead Reports- Do I need to change settings? littlefatcat 3 245 06-15-2017, 02:29 PM
Last Post: littlefatcat
  BUG REPORTS for new forum software [Thread Now Closed] SuperSleeper 217 6,741 02-14-2017, 05:54 PM
Last Post: SuperSleeper
  Why does Sleepyhead data not match my machine's data? Ihaveapnea 8 899 01-06-2017, 06:19 PM
Last Post: Ihaveapnea
  ResScan Reports for AHI Differs From Machine AHI nadprok 2 527 08-02-2016, 11:54 AM
Last Post: nadprok
  CPAP Reports Poor Seal Contrary to what I think Tiercel 1 417 06-22-2016, 07:26 AM
Last Post: green wings
  Revised Post Regarding "I need help with SH data" - with data included! Jeffo1 3 870 05-16-2016, 11:28 PM
Last Post: Jeffo1

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.