Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

ResMed AirSense 10 - Maintenance Manual
#1
Does anyone have or know where I can get a Maintenance Manual for the ResMed AirSense 10
Post Reply Post Reply
#2
(10-21-2015, 06:48 AM)Reuven Gruber Wrote: Does anyone have or know where I can get a Maintenance Manual for the ResMed AirSense 10


I assume you mean the Clinicians Manual?
See top of this page, click on CPAP Setup Manuals. Can order by email free.
Post Reply Post Reply
#3
No - I am looking for a manual that shows how to repair the unit
Post Reply Post Reply


#4
I wouldn't think that ResMed is going to make that readily available to the consumer.

Hope you are not having issues with you machine, but it should be under warranty. Smile
Post Reply Post Reply
#5
(10-21-2015, 08:15 AM)OpalRose Wrote: Hope you are not having issues with you machine, but it should be under warranty. Smile

Actually I am having a problem with my machine which I hope will be resolved under warranty - but the situation is a bit complex
Post Reply Post Reply
#6
(10-21-2015, 08:15 AM)OpalRose Wrote: I wouldn't think that ResMed is going to make that readily available to the consumer.

Hope you are not having issues with you machine, but it should be under warranty. Smile

Unfortunately if you like me bought your Resmed from the U.S for use in Australia
, the units Warranty is Void, as Resmed DO NOT want Australians buying their CPAP Machines from the U.S where it is HUGELY cheaper!

(which is a bit of a joke as Resmed is an Australian Company and the Machines in the U.S come FROM Australia!)

But seriously, why would we put up with any Masks retailing for $250 and say a ResMed S10 Autoset costing us OVER $2000 when in the U.S they are around $870!

Even with the crappy exchange rate with the U.S $ lately (2 years ago or so One Aussie $ would get you $1.08) at One Aussie $ getting us just .73c U.S, by buying from the U.S we can still save almost $800!!

Funny how Companies are so against "Global Trade" when it does not suit them and Warranties Voided when you buy a product that a Company makes in another Country or you bought NOT in your country for some very good reason..

In the case of RESMED ALL their machines are built in one place (Singapore) then shipped to all the other countries they are sold in, BUT woe betide the Consumer that buys that machine in one country and takes it back to their country...how Dare they!!!

All I can say to that is ...How Dare They seek to charge Australians so much more than other Nations and Void Warranties to Punish any who go on that quest to buy their product at ANOTHER location because it's SO MUCH Cheaper...or because we were being Gouged in our Home Market....

Ahh...Selective Globalization...ONLY a good concept when it favours just the same people who would rather you didn't get ANY of the advantages or benefits they were given but now prevent any others from having/getting.

Fairness...works so much better when only the favoured Few benefit from it which they then deny any others from having because now it is no longer fair....



Post Reply Post Reply


#7
(10-21-2015, 11:37 AM)Loomy Wrote: But seriously, why would we put up with any Masks retailing for $250 and say a ResMed S10 Autoset costing us OVER $2000 when in the U.S they are around $870!

Even with the crappy exchange rate with the U.S $ lately (2 years ago or so One Aussie $ would get you $1.08) at One Aussie $ getting us just .73c U.S, by buying from the U.S we can still save almost $800!!
Welcome to the forum, Loomy

I agree, crazy crazy prices
How dare they charge so much, CPAP is not luxury item but rather medical necessity
It should be affordable for everyone, not just for the rich with deep pockets
I get all my supplies on-line, otherwise wouldn't be able to afford them and probably not getting any treatment either


Post Reply Post Reply
#8
(10-21-2015, 06:48 AM)Reuven Gruber Wrote: Does anyone have or know where I can get a Maintenance Manual for the ResMed AirSense 10
I have seen one from F&P, not from ResMed

There are some inside pictures of the S9. A10 still new for someone to open up

Post Reply Post Reply
#9
Not much in any of these machines tnat is repairable without access to parts. Aside from the rare poor solder connection, you are not going to find much to fix. If the unit got fluid in it, take it apart and clean it with a good contact cleaner, Plain water can be used for some parts too, but you need to allow everything to dry before re-assembly. If you are brave, take it apart and have a go. What the hell, it's already broke.
Post Reply Post Reply


#10
There is a thread that describes how to take the unit apart to unplug the modem.

Here: http://www.apneaboard.com/forums/Thread-...able+modem












.









Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [Equipment] ResMed AirSense 10 AutoSet APAP vs ResMed AirSense 10 AutoSet For Her SingerWang 7 142 12 minutes ago
Last Post: chigirl
  Prescribed manual pressure setting vs Auto JT01 22 1,334 Today, 04:35 AM
Last Post: kwhenrykerr
  SoClean 2 for Resmed AirSense 10 Auto Orionsnet 16 379 03-26-2017, 04:08 PM
Last Post: Orionsnet
  [CPAP] Resmed Airsense 10 Autoset - Need advanced help... Kayak18 10 252 03-24-2017, 07:01 PM
Last Post: Sleeprider
  Problems with AirFit P10 Nasal Pillows (+ResMed AirSense 10) numari 18 7,046 03-23-2017, 11:36 AM
Last Post: PaytonA
  Resmed Airsense "response" soft or standard Binti1962 9 307 03-21-2017, 01:22 PM
Last Post: Marillion
  Airsense "for her" for Him? rockncountry101 25 4,564 03-16-2017, 06:12 PM
Last Post: Frieda

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.