Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

ResMed S9 Auto: data not fully recorded?
#1
ResMed S9 Auto: data not fully recorded?
Greetings all. New user, had a ResMed S9 Autoset for about 2 weeks. Finding lately that I can sleep through the night with the nose pillow mask.
Just started using Sleepyhead on my Mac to track events, etc. Followed excellent instructions on creating automatic full data backups of S9's limited 7 day dataset.

PROBLEM: it appears that the data cuts off roughly 3-4 AM, every night! This is indicated on the timestamp of the files off the SD card, as well (of course) in the Sleepyhead displays. Time/data is correct on the unit.

For example, timestamp on data last night ends at 3:50AM. But I slept until 5:40AM.

Post Reply Post Reply



Donate to Apnea Board  
#2
RE: ResMed S9 Auto: data not fully recorded?
Hi editingfx,
WELCOME! to the forum.!
I use a mac but I don't use software but hang in there and someone will be able to help you soon.
Best of luck to you with your CPAP therapy.
trish6hundred
Post Reply Post Reply
#3
RE: ResMed S9 Auto: data not fully recorded?
Check to see what the time is on your machine. Sounds as if it is not the same as your location. The ResMed machines go from noon to noon as their "day". So if at your 3am, if it thinks it is noon, it will shift the rest of the night onto the next day.
http://www.apneaboard.com/wiki/index.php..._the_clock
PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.




Post Reply Post Reply
#4
RE: ResMed S9 Auto: data not fully recorded?
(02-12-2013, 10:10 PM)PaulaO2 Wrote: Check to see what the time is on your machine. Sounds as if it is not the same as your location. The ResMed machines go from noon to noon as their "day".

I've heard that many times. But is there a way to change this?
Post Reply Post Reply



Donate to Apnea Board  
#5
RE: ResMed S9 Auto: data not fully recorded?
Yes, at the link in my message.
PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.




Post Reply Post Reply
#6
RE: ResMed S9 Auto: data not fully recorded?
Check to see that the start times are correct.

If you're taking the card out shortly after turning the machine off, try leaving the card in for an hour or so after waking up. There have been some suggestions that the machine may not always write the data out right after turning off.
Get the free SleepyHead software here.
Useful links.
Click here for information on the main alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check it yourself.
Post Reply Post Reply
#7
RE: ResMed S9 Auto: data not fully recorded?
do have smartstart enabled but suppose an hour gap a bit too long not to notice the mask is off
Post Reply Post Reply



Donate to Apnea Board  
#8
RE: ResMed S9 Auto: data not fully recorded?
Look and see what time it said you went to bed. I am guessing it says you went to bed two hours before you actually did. So the whole clock is probably just two hours off but the data is all there. For example, how long did it say you slept in total? If that is right then the data is there.

(02-12-2013, 08:04 PM)editingfx Wrote: Greetings all. New user, had a ResMed S9 Autoset for about 2 weeks. Finding lately that I can sleep through the night with the nose pillow mask.
Just started using Sleepyhead on my Mac to track events, etc. Followed excellent instructions on creating automatic full data backups of S9's limited 7 day dataset.

PROBLEM: it appears that the data cuts off roughly 3-4 AM, every night! This is indicated on the timestamp of the files off the SD card, as well (of course) in the Sleepyhead displays. Time/data is correct on the unit.

For example, timestamp on data last night ends at 3:50AM. But I slept until 5:40AM.

Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  ResMed Airsense 10 Auto for Her - Advice Needed From Users AmyGrace 6 211 05-21-2019, 11:53 AM
Last Post: alshayed
  ResMed AirSense 10 [how to turn auto/on auto/off feature off?] IsrvChrist 3 155 05-03-2019, 08:25 PM
Last Post: Big Guy
  Resmed Auto Sense 10 - 5 Days in - Started Well and Now Going Downhill - Normal? TreePNW 10 340 04-22-2019, 09:08 PM
Last Post: Sleeprider
  Obst & Central Apnea - on ASV. why do most say- resmed vs dreamstation auto sv? My3rd3y3 110 3,022 04-20-2019, 08:47 AM
Last Post: bonjour
Question [Equipment] Backing up ResMed 10 Data under Mac OS X - same for ResMed S9? mishld 2 83 04-09-2019, 01:38 PM
Last Post: jaswilliams
  ResMed Airsense Auto 10 Humidifier Setting zzz1 6 361 03-07-2019, 04:06 PM
Last Post: jaswilliams
  Please Review Data - 1st Night on Auto 10 zzz1 3 227 03-07-2019, 01:00 AM
Last Post: nbarday


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.