Post Reply 
ResMed SD Card SleepyHead Questions
Author Message
2Tim215 Offline

Preferred Members-2

Posts: 283
Joined: Oct 2012

Machine: S9 ResMed AutoSet
Mask Type: Nasal pillows
Mask Make & Model: Swift FX Nasal Pillow - Medium
Humidifier: ResMed H5i w/Climate Hose
CPAP Pressure: 6cm-12cm
CPAP Software: ResScan SleepyHead

Other Comments: OSA, Fibromyalgia, Rheumatoid Arthritis, Osteoarthritis, Gout, PTSD, & Meralgia paresthetica.

Sex: Male
Location: Finger Lakes Region, NY

Post: #1
ResMed SD Card SleepyHead Questions
Last night was my first night on the S9 AutoSet. I have a few questions.
1. If I remove the SD Card to read it with SleepyHead does it remove any of the information or will it still be on the card when I re-insert it?

2. The RT/Clinician set the Temp for 72, do I have to push the "Turn Knob" down for 3 seconds like on the Escape to start the Temp? If I don't want the Temp, by not pushing it will it bypass the "heated" humidifier?

3. I would like to post my graphs for my first night and see what others think of how the first night went. And if someone can post the best link to understand and read SleepyHead I would appreciate it. I believe I have the latest version.

Appreciate all replies and help!

Tim
Finger Lakes Region, NY
11-15-2012 12:46 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Fest911 Offline

Members

Posts: 4
Joined: Nov 2012

Machine: Resmed S-9 Autoset
Mask Type: Full face mask
Mask Make & Model: ResMed Quattro FX
Humidifier: Resmed H5i
CPAP Pressure: 5-12
CPAP Software: ResScan

Other Comments:

Sex: Male
Location: Sunnyvale, CA

Post: #2
RE: ResMed SD Card SleepyHead Questions
Tim,
I am also new, just had my second night with my S9, so I don't have the answer to your temp question BUT regarding the SD card: slide the lock tab to the locked position if you are concerned about any potential data loss, and slide it back to 'unlock' before you put it back in the machine. This will ensure you can't alter your data in any way.
11-15-2012 01:23 PM
Find all posts by this user Post Reply Quote this message in a reply
2Tim215 Offline

Preferred Members-2

Posts: 283
Joined: Oct 2012

Machine: S9 ResMed AutoSet
Mask Type: Nasal pillows
Mask Make & Model: Swift FX Nasal Pillow - Medium
Humidifier: ResMed H5i w/Climate Hose
CPAP Pressure: 6cm-12cm
CPAP Software: ResScan SleepyHead

Other Comments: OSA, Fibromyalgia, Rheumatoid Arthritis, Osteoarthritis, Gout, PTSD, & Meralgia paresthetica.

Sex: Male
Location: Finger Lakes Region, NY

Post: #3
RE: ResMed SD Card SleepyHead Questions
(11-15-2012 01:23 PM)Fest911 Wrote:  Tim,
I am also new, just had my second night with my S9, so I don't have the answer to your temp question BUT regarding the SD card: slide the lock tab to the locked position if you are concerned about any potential data loss, and slide it back to 'unlock' before you put it back in the machine. This will ensure you can't alter your data in any way.

Okay, Thanks, sounds like the way to go!

Tim
Finger Lakes Region, NY
11-15-2012 01:31 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
2Tim215 Offline

Preferred Members-2

Posts: 283
Joined: Oct 2012

Machine: S9 ResMed AutoSet
Mask Type: Nasal pillows
Mask Make & Model: Swift FX Nasal Pillow - Medium
Humidifier: ResMed H5i w/Climate Hose
CPAP Pressure: 6cm-12cm
CPAP Software: ResScan SleepyHead

Other Comments: OSA, Fibromyalgia, Rheumatoid Arthritis, Osteoarthritis, Gout, PTSD, & Meralgia paresthetica.

Sex: Male
Location: Finger Lakes Region, NY

Post: #4
RE: ResMed SD Card SleepyHead Questions
Okay, here are a few photos. I know it takes more than a day to get an average or reliable data but curious how the first night looks on AutoPap with new pressures.
[Image: 2012-11-15_1403_Auto1-a.png]
[Image: 2012-11-15_1401_Auto1.png]

Tim
Finger Lakes Region, NY
(This post was last modified: 11-15-2012 02:15 PM by 2Tim215.)
11-15-2012 02:14 PM
Find all posts by this user Post Reply Quote this message in a reply
JudgeMental Offline

Advisory Members

Posts: 324
Joined: Feb 2012

Machine: Respironics DreamStation Auto-CPAP
Mask Type: Full face mask
Mask Make & Model: Respironics Amara View
Humidifier: Respironics
CPAP Pressure: 11-14
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location: Florida USA

Post: #5
RE: ResMed SD Card SleepyHead Questions
To answer your question #1.
Taking out the SD card; putting it in your computer to load to SleepHead; and then returning it to your CPAP does not remove any 'already' copied info to the card. As Fest911 suggests, use the safefy lock if there is any possibility that you might override some info, altho I don;t see how that could happen if all you are going to be doing is using it in SleepHead. As soon as you upload your info from the card to SleepyHead (takes like 1-2 secs)..remove the card and put it back in the CPAP and then play with SleepyHead. Good Luck..
can't help with ?? #2
Ref: ?? #3/// best source for that is in SleepyHead itself.

Yesterday is history; Tomorrow is a mystery; Today is a gift; Thats why its called "The Present".
(This post was last modified: 11-15-2012 02:17 PM by JudgeMental.)
11-15-2012 02:16 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
PaulaO2 Offline
Wiki Editor
Moderators

Posts: 8,065
Joined: Feb 2012

Machine: S9 Autoset
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: H5i
CPAP Pressure: 14-20
CPAP Software: SleepyHead

Other Comments: Ehlers-Danlos Syndrome, Hypermobility Type; chronic sarcasm

Sex: Undisclosed
Location: western NC, USA

Post: #6
RE: ResMed SD Card SleepyHead Questions
#2 - Not sure why you had to hold the knob down for 3 sec. I never had to.

With the 'Home' screen showing, turn the knob until the temp is shown. Should be the second one.
Press the knob once. The temp should be highlighted in orange.
Turn the knob to set the temp.
Press the knob again. Now it should be blue.

However, every time you turn the machine on (as in the air is blowing) the temp screen should show and it should be orange. Just turn the knob to set or leave it where it is. No need to press the knob to confirm as it confirms itself.

PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
11-15-2012 02:21 PM
Find all posts by this user Post Reply Quote this message in a reply
PaulaO2 Offline
Wiki Editor
Moderators

Posts: 8,065
Joined: Feb 2012

Machine: S9 Autoset
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: H5i
CPAP Pressure: 14-20
CPAP Software: SleepyHead

Other Comments: Ehlers-Danlos Syndrome, Hypermobility Type; chronic sarcasm

Sex: Undisclosed
Location: western NC, USA

Post: #7
RE: ResMed SD Card SleepyHead Questions
#3 - In SleepyHead, click the "Help Browser" tab in the top left. There's all sorts of information there and links to the rest of the SH Wiki. You can either view it there or copy/paste the link into your usual browser.

Or just click here:
http://sourceforge.net/apps/mediawiki/sl...=Main_Page

PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
11-15-2012 02:24 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
2Tim215 Offline

Preferred Members-2

Posts: 283
Joined: Oct 2012

Machine: S9 ResMed AutoSet
Mask Type: Nasal pillows
Mask Make & Model: Swift FX Nasal Pillow - Medium
Humidifier: ResMed H5i w/Climate Hose
CPAP Pressure: 6cm-12cm
CPAP Software: ResScan SleepyHead

Other Comments: OSA, Fibromyalgia, Rheumatoid Arthritis, Osteoarthritis, Gout, PTSD, & Meralgia paresthetica.

Sex: Male
Location: Finger Lakes Region, NY

Post: #8
RE: ResMed SD Card SleepyHead Questions
(11-15-2012 02:24 PM)PaulaO2 Wrote:  #3 - In SleepyHead, click the "Help Browser" tab in the top left. There's all sorts of information there and links to the rest of the SH Wiki. You can either view it there or copy/paste the link into your usual browser.

Or just click here:
http://sourceforge.net/apps/mediawiki/sl...=Main_Page
Thank you Paula, I found it in SleepyHead. Is anyone else here having a problem with the page constantly reloading? No matter what page I'm on my reload keeps reloading the page. I'm using Windows 7 and the green circle in this tab keeps turning. When I hit the stop X, it starts again in a few seconds? I have three other tabs open but only happening here. Did I turn something on or is a glitch?

Tim
Finger Lakes Region, NY
11-15-2012 02:32 PM
Find all posts by this user Post Reply Quote this message in a reply
2Tim215 Offline

Preferred Members-2

Posts: 283
Joined: Oct 2012

Machine: S9 ResMed AutoSet
Mask Type: Nasal pillows
Mask Make & Model: Swift FX Nasal Pillow - Medium
Humidifier: ResMed H5i w/Climate Hose
CPAP Pressure: 6cm-12cm
CPAP Software: ResScan SleepyHead

Other Comments: OSA, Fibromyalgia, Rheumatoid Arthritis, Osteoarthritis, Gout, PTSD, & Meralgia paresthetica.

Sex: Male
Location: Finger Lakes Region, NY

Post: #9
RE: ResMed SD Card SleepyHead Questions
When SleepyHead records an event, what is the time frame to consider an event has happened? Is 10 seconds or more?

Tim
Finger Lakes Region, NY
(This post was last modified: 11-15-2012 03:05 PM by 2Tim215.)
11-15-2012 03:02 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
PaulaO2 Offline
Wiki Editor
Moderators

Posts: 8,065
Joined: Feb 2012

Machine: S9 Autoset
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: H5i
CPAP Pressure: 14-20
CPAP Software: SleepyHead

Other Comments: Ehlers-Danlos Syndrome, Hypermobility Type; chronic sarcasm

Sex: Undisclosed
Location: western NC, USA

Post: #10
RE: ResMed SD Card SleepyHead Questions
I believe they all use 10 seconds as that is the standard.

The Help Browser is not the best part of SleepyHead. It's why I copy/paste the links into Firefox. Sourceforge is also a very big and busy website.

PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
11-15-2012 03:08 PM
Find all posts by this user Post Reply Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  [Equipment] ResMed AirSense - Is there data storage on the SD card AND in the unit itself? FormerFed 19 2,461 11-03-2016 03:17 PM
Last Post: PreciousRoy
  Changed to resmed 10 auto, several questions Shockwave 10 648 08-31-2016 07:03 PM
Last Post: Shockwave
  General questions on SD card data KSMatthew 12 998 07-05-2016 01:32 PM
Last Post: KSMatthew
  Data card to Resmed S8 Autoset Spirit II. kriper 1 446 05-23-2016 05:24 PM
Last Post: justMongo
  [Equipment] ResMed AirSense 10 warranty impact of changing SD card aenpa 4 708 05-12-2016 03:14 PM
Last Post: palerider
  Resmed S9 SD card setup davek 9 1,195 04-27-2016 04:19 PM
Last Post: Dawei
  ResMed S9 SD Card "Invalid SD Card, erase card data?" MAPnea 28 27,460 03-18-2016 07:32 PM
Last Post: palerider

Forum Jump:

Who's Online (Complete List)