Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

ResScan 4.2?
#31
Many people successfully use non-ResMed SD cards. 1 or 2 GB SD cards are OK, but even SDHC cards up to 8 GB seem to work. It's getting hard to find 2 GB and smaller SD cards.

S9 machines sometimes seem to be a little squirrelly about when they write the data to the card. If you're still having problems, try leaving the card in the machine for several minutes after turning the machine off or even an hour or so and seeing if the data shows up then.
Get the free SleepyHead software here.
Useful links.
Click here for information on the main alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check it yourself.
Post Reply Post Reply
#32
(01-02-2013, 11:29 PM)TheWerkz Wrote: Remember, newer software is ALWAYS better software! Dielaughing

As a programmer in a past life, I would suggest redoing this statement by substituting the word ALWAYS with GENERALLY
Post Reply Post Reply
#33
(01-02-2013, 08:12 PM)BobF Wrote: I have ResScan Version 04.01.03. I see Version 4.2 is available. What does 4.2 do that mine does not? If I download it can I just install it over my old version? Thanks, Bob.
I was googling around and found 4.2 release notes
It seem an additional support to S9 VPAP ST-A in Europe and removal of support of some obsolete machines plus added features to do with remotely transfer of data
Read more: http://www.resmed.com/us/assets/document...-notes.pdf
Post Reply Post Reply


#34
(05-27-2013, 05:52 PM)zonk Wrote:
(01-02-2013, 08:12 PM)BobF Wrote: I have ResScan Version 04.01.03. I see Version 4.2 is available. What does 4.2 do that mine does not? If I download it can I just install it over my old version? Thanks, Bob.
I was googling around and found 4.2 release notes
It seem an additional support to S9 VPAP ST-A in Europe and removal of support of some obsolete machines plus added features to do with remotely transfer of data
Read more: http://www.resmed.com/us/assets/document...-notes.pdf
Hi Zonk. OK. Thanks. None of those are important to me so I'll stick with what I have. Regards, Bob.
Post Reply Post Reply
#35
(05-27-2013, 06:10 PM)BobF Wrote: Hi Zonk. OK. Thanks. None of those are important to me so I'll stick with what I have. Regards, Bob.

When I installed ResScan 4.2, I did find it more robust, and there were some minor new features as well. Usually, not all the enhancements and bug fixes go into the release notes for a new version, just a subset of them. Anyways, the upgrade to 4.2 was worth it for me.

Now I'm looking for ResScan 4.3 to see what's of interest there *smile*.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  rera shows up in ResScan not Sleepyhead yankees123 8 223 10-11-2017, 01:41 PM
Last Post: Walla Walla
  ResScan says doing great, pulse oximeter says not so good!! Don in Austin 21 5,654 05-29-2015, 06:57 AM
Last Post: 4dots
  Anatomy of an event - ResScan Data MobileBasset 4 1,295 05-26-2015, 03:31 PM
Last Post: justMongo
  ResScan info contradicts itself Dawei 12 5,356 03-04-2015, 10:46 PM
Last Post: penuel
  Here is my feature list for ResScan 5.2 and Resmed Airsense 10 jimbrandt2000 3 1,952 02-06-2015, 09:22 PM
Last Post: Mr. Van Winkle
  ResMed ResScan software detailed graphs interpretation old82 1 1,575 01-24-2015, 08:02 PM
Last Post: 3porpoise
  Does ResScan indicate when I'm asleep? swaziman 6 2,136 01-20-2015, 04:33 AM
Last Post: swaziman

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.