Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

ResScan 6.0 Install Problem
#1
ResScan 6.0 Install Problem
After installing ResScan 6.0 with no drivers, I attempt to start the program, get the login screen and login successfully and then get the following error message "Pure virtual function called" and the program shuts down.  Same thing was happening with 5.9. Nothing appears in the manual under troubleshooting.

Any ideas about what the error message is indicating?
Post Reply Post Reply



Donate to Apnea Board  
#2
RE: ResScan 6.0 Install Problem
Quoting from Crimson Nape's post (click here). There's also some other suggestions immediately below his post you may wish to try, but here's the text of his solution:


Crimson Nape Wrote:It sounds like your Visual C++ Redistribution library has been updated and the program is looking for an earlier version.  Open the Event Viewer. Look under Custom Views->Administrative Events for an Error for that program.  In the Details section it should provide more information.

Here are the links to the VC++ libraries.  You will need to install both 32 and 64 bit versions if you are running a 64 bit O/S. I would try the 2015 version first.

Microsoft Visual C++ Redistributable 2017
32 Bit:
https://go.microsoft.com/fwlink/?LinkId=746571
64 Bit:
https://go.microsoft.com/fwlink/?LinkId=746572

Microsoft Visual C++ Redistributable 2015
32 Bit:
https://download.microsoft.com/download/...st.x86.exe
64 Bit:
https://download.microsoft.com/download/...st.x64.exe

I hope this will help.
SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



Post Reply Post Reply
#3
RE: ResScan 6.0 Install Problem
Didn't work. Looked at the event file and there apparently is an application specific permission that has to be resolved with Component Services. I'm researching that now.

Thanks for the help.
Post Reply Post Reply
#4
RE: ResScan 6.0 Install Problem
Might want to try the additional solution mentioned in this post:

http://www.apneaboard.com/forums/Thread-...#pid236527

Also, there's some other solutions offered below that post.

Thinking-about

NOTE:  If and when you DO find a solution, it would super if you come back here and let us know what solution worked to fix the issue.
SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



Post Reply Post Reply



Donate to Apnea Board  
#5
RE: ResScan 6.0 Install Problem
Switching to Windows 8 compatibility resolved the issue. Right click the icon, select "troubleshoot compatibility" and then select "try recommended settings" and follow from there. Select test program when asked.
Post Reply Post Reply
#6
RE: ResScan 6.0 Install Problem
Super... thanks for the reply to let others know what worked for you!

like
SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



Post Reply Post Reply
#7
RE: ResScan 6.0 Install Problem
I try to install ResScan 6.0, but getting an error message: Error 1714.
During installation process, it is looking for ResScan.msi file but it is not located in the default installation directory.
I did a scan in my c: drive, but cannot locate this file!
Post Reply Post Reply



Donate to Apnea Board  
#8
RE: ResScan 6.0 Install Problem
I resolved my "Pure Virtual Function" error message by creating a new user on my PC and logging in as that user and installing ResScan. Apparently there is some registry corruption on my other login.

Using FlashAir W-03 SD card in machine. Access through wifi with FlashPAP or Sleep Master utilities.

I wanted to learn Binary so I enrolled in Binary 101. I seemed to have missed the first four courses. Big Grinnie

Post Reply Post Reply
#9
RE: ResScan 6.0 Install Problem
(06-07-2018, 01:34 AM)gumleafau Wrote: I try to install ResScan 6.0, but getting an error message: Error 1714.
During installation process, it is looking for ResScan.msi file but it is not located in the default installation directory.
I did a scan in my c: drive, but cannot locate this file!

Make sure you have unzipped the download before trying to install
Post Reply Post Reply
#10
RE: ResScan 6.0 Install Problem
(06-07-2018, 12:34 PM)jaswilliams Wrote: Make sure you have unzipped the download before trying to install

Yep, common mistake - this is due to the way Windows now displays a compressed (zipped) file as a folder. It looks like a regular folder and you can see what's inside of it just like a regular folder, but you have to first extract (unzip) the file to uncompress the files into a regular folder. Then you can install it from the newly-created (unzipped) folder that should sit in the same directory as the zip file.
SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



Post Reply Post Reply



Donate to Apnea Board  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Win10-1809 and ResScan steve823 2 28 43 minutes ago
Last Post: steve823
Information [Admin Note] New ResScan version 6.0 SuperSleeper 46 7,165 6 hours ago
Last Post: Crimson Nape
  printing ResScan detailed graphs bwhresmed265 3 98 11-10-2018, 10:07 AM
Last Post: bwhresmed265
  ResScan 6.0 Software Lowhypopnea 4 298 11-09-2018, 09:59 AM
Last Post: Crimson Nape
  Sleepyhead / CMS50F 8-day data offset problem JimInPT 8 354 11-06-2018, 10:10 AM
Last Post: JimInPT
  ResMed Software [problem installing] frankresmeds9 1 261 10-22-2018, 12:13 PM
Last Post: AlanE
  ResScan Software for Mac? Cam12 3 204 10-17-2018, 07:02 PM
Last Post: Cam12


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.