Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

ResScan CPAP Reporting Software (OLD version: 5.5) [Archived Discussions]
RE: ResScan CPAP Reporting Software (current version: 5.4.1)
Yes both work fine. You need to have the data on an SD card for ResScan to work. Although someone else mentioned it worked on their USB drive. I download the data into a spare SD card and have SH and ResScan read off that.

Using FlashAir W-03 SD card in machine. Access through wifi with FlashPAP or Sleep Master utilities.

I wanted to learn Binary so I enrolled in Binary 101. I seemed to have missed the first four courses. Big Grinnie




Donate to Apnea Board  
RE: ResScan CPAP Reporting Software (current version: 5.4.1)
(07-06-2015, 09:27 AM)AlanE Wrote: Yes both work fine. You need to have the data on an SD card for ResScan to work. Although someone else mentioned it worked on their USB drive. I download the data into a spare SD card and have SH and ResScan read off that.

I don't use an SD card to run ResScan. It reads the data from a file which has been generated by SleepMaster on my computer.
SleepMaste transfers the data from a wifi enabled card (FlashAir) in my PAP machine.
I can run both ResScan and SleepyHead from the same computer. I prefer ResScan because SH is buggy for my AirCurve 10 VAuto.
if you can't decide then you don't have enough data.
RE: ResScan CPAP Reporting Software (current version: 5.4.1)
Hi,

I just downloaded and installed 5.4.1.

I was hoping they'd fix the screen displays. I have Windows 7 set to display everything at 125% - getting old sucks.

Unfortunately, Resscan's buttons, mostly, are no longer visible even after resizing their screens. I just have to remember to go back to 100% before using Resscan, which requires a logoff/logon.

Thanks for the link to the new version!
RE: ResScan CPAP Reporting Software (current version: 5.4.1)
Hello "apneaboard's"

I want to say thank you from France for share resscan software. Thanks



Donate to Apnea Board  
RE: ResScan CPAP Reporting Software (current version: 5.4.1)
(07-10-2015, 02:12 AM)savana Wrote: Hello "apneaboard's"

I want to say thank you from France for share resscan software. Thanks

Welcome to Apnea Board, savana

Whats the model of your S9?
Your profile shows in other comments ... "central and mixed apnea"


RE: ResScan CPAP Reporting Software (current version: 5.4.1)
[attachment=1594]

Hello everyone, I am new here so bear with me please.

I run Windows 7 and recently downloaded ResScan 5.4.1 and installed as per instructions. I have tried rebooting, uninstalling, downloading the zip file again and opening as Administrator.

The problem is: when trying to open ResScan it initially gives me a message:
"Unable to detect device communication library".
The program opens however, the Download Data button is inactive.

I would appreciate some help rectifying this problem.

Thank you.

RE: ResScan CPAP Reporting Software (current version: 5.4.1)
(07-17-2015, 11:24 PM)Crikey Wrote: Hello everyone, I am new here so bear with me please.

I run Windows 7 and recently downloaded ResScan 5.4.1 and installed as per instructions. I have tried rebooting, uninstalling, downloading the zip file again and opening as Administrator.

The problem is: when trying to open ResScan it initially gives me a message:
"Unable to detect device communication library".
The program opens however, the Download Data button is inactive.

I would appreciate some help rectifying this problem.

Thank you.

Hi Crikey, welcome to Apnea Board.

I would try downloading again and installing again, just to see if it might help.

Oops - Sorry, I see you've already tried that.

I'm not a Windows expert but some who have posted in this thread are, and hopefully will respond.

In the meantime, I think SleepyHead works well with your machine and is preferred by many.

Or, if you have lots of time, skimming the many hundreds of posts in this thread would likely uncover a few which have provided suggestions for the installation issue you are having.

Good luck.
Membership in the Advisory Member group should not be understood as in any way implying medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.  The Advisory Member group provides advice and suggestions to Apnea Board administrators and staff on matters concerning Apnea Board operation and administrative policies - not on matters concerning treatment for Sleep Apnea.



Donate to Apnea Board  
RE: ResScan CPAP Reporting Software (current version: 5.4.1)
When you reinstall, follow the installation warning message:

"During the first part of the software installation, it will ask you if you want to install their 3 proprietary drivers. DO NOT CHECK any of the 3 boxes for these drivers, unless you have one of the following three ResMed-brand devices:

1) ResMed S9 USB Adapter (P/C: 36950) or ResMed S8 USB Adapter (P/C: 22203)

2) ResMed's ResScan Data Card Reader (P/C: 22207) or ACR 38U Smart Card Reader

3) ResMed Stellar ventilator machine with direct USB connection

Some users have reported that installing these drivers makes the ResScan program non-functional. If you're not sure what to do, try installing the software without the drivers first to see if the program runs properly without them."

You will need to have your SD card inserted into a reader before running the program. Some have reported that they got ResScan to work without an SD card reader though. I have had trouble trying that and just don't have the patience to figure it out.

Using FlashAir W-03 SD card in machine. Access through wifi with FlashPAP or Sleep Master utilities.

I wanted to learn Binary so I enrolled in Binary 101. I seemed to have missed the first four courses. Big Grinnie

RE: ResScan CPAP Reporting Software (current version: 5.4.1)
ResMed software won't load onto a Mac. Is there any software that does? This would influence my decision on which machine to buy.
RE: ResScan CPAP Reporting Software (current version: 5.4.1)
Sleepyhead will work on the Mac

Admin Note:
PaytonA passed away in September 2017
Click HERE to read his Memorial Thread

~ Rest in Peace ~



Donate to Apnea Board  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Difference in reporting useage in Oscar from Sleephead biyahero 25 344 4 hours ago
Last Post: biyahero
  Can't find a software for my CPAP machine Yugen2935 1 40 9 hours ago
Last Post: Crimson Nape
  ResScan 5.9 Install ThePaper 6 788 07-02-2019, 05:30 PM
Last Post: OpalRose
  Oscar vs Resscan Apnearon 12 359 06-28-2019, 10:37 AM
Last Post: Apnearon
  ResMed/ResScan jinx1953 6 363 06-17-2019, 07:51 AM
Last Post: jinx1953
  ResScan 6.0 30 day compliance lilwes 3 841 06-02-2019, 06:56 PM
Last Post: lilwes
  OSCAR -- Unknown Reporting Error In Overview RWS0022 10 269 06-02-2019, 01:07 PM
Last Post: Apnea Infant


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.